Liquid Fertilizer Suppliers USA - Bulk Distributors & Industrial Manufacturers

Where to buy Liquid Fertilizers in the USA

We have compiled a list of Liquid Fertilizer suppliers in the USA. Liquid Fertilizers also spelled Fertilizers.

Looking for a particular Liquid Fertilizer to purchase

Simply use the search box, then use the suppliers website link to inquire or for prices. The listed companies have a genuine American presence and include: manufacturers, distributors, wholesale, industrial, retail and bulk suppliers.

Also see Organic Fertilizer

Product	Description	Suppliers Website
3,4-Dimethylpyrazole Phosphate (3,4-Dimethyl-1H-pyrazole Phosphate, DMPP, Entec) Quick inquiry Where to buy Suppliers range	A new nitrification inhibitor to be used on solid and in liquid fertilizers and slurry. Group: Biochemicals. Alternative Names: 3,4-Dimethyl-1H-pyrazole Phosphate; DMPP; Entec. Grades: Highly Purified. CAS No. 202842-98-6. Pack Sizes: 1g, 5g, 10g, 25g. Molecular Formula: C5H11N2O4P, Molecular Weight: 194.13. US Biological Life Sciences.	Worldwide
Ammonium Thiocyanate Quick inquiry Where to buy Suppliers range	Ammonium Thiocyanate. Uses: Ammonium thiocyanate is a colorless crystalline solid. It is soluble in water. The primary hazard is the threat posed to the environment. Immediate steps should be taken to limit its spread to the environment. It is used in chemical analysis, in photography, as a fertilizer, and for many other uses.;DryPowder; OtherSolid; PelletsLargeCrystals. Group: Polymers. IUPAC Name: azanium;thiocyanate. Molecular Weight: 76.12g/mol. Molecular Formula: NH4SCN;CH4N2S. SMILES: C(#N)[S-].[NH4+]. InChI: InChI=1S/CHNS.H3N/c2-1-3;/h3H;1H3. InChIKey: SOIFLUNRINLCBN-UHFFFAOYSA-N. Boiling Point: Solid decomposes (USCG, 1999). Melting Point: 320 °F (USCG, 1999);149.6 ?;149.6 ?. Density: greater than 1.1 at 68 °F 1.1-1.15 at 20? (solution) (USCG, 1999);1.3057 g/mL. Solubility: 8.28 M;Very sol in water and ethanol; sol in acetone; insol in chloroform.;Highly sol in liquid ammonia and liquid sulfur dioxide, and mildly sol in acetonitrile;Freely sol in ethanol; sol in methanol, acetone; practically insol in CHCl3, ethyl acetate.
Bourgeonal Quick inquiry Where to buy Suppliers range	A potent agonist at hOR17-4 (a human testicular olfactory receptor) and acts as a strong chemoattractant in sperm behavioral assays. The bourgeonal-hOR17-4 signaling pathway potentially governs chemical communication between sperm and egg and may be used to manipulate or block fertilization. Bourgeonal is an aromatic aldehyde used in perfumery. It has a fragrance reminiscent of lily of the valley, otherwise described as floral, watery, green and aldehydic. It is a pale yellow liquid at room temperature. Group: Biochemicals. Alternative Names: 4-tert-Butyl Benzene propionaldehyde; 4- (1, 1-Dimethylethyl) benzenepropanal; 3-(4-tert-Butylphenyl)propanal. Grades: Highly Purified. CAS No. 18127-01-0. Pack Sizes: 10mg. Molecular Formula: C??H??O, Molecular Weight: 190.28. US Biological Life Sciences.	Worldwide
Dicyandiamide Quick inquiry Where to buy Suppliers range	DryPowder; Liquid; OtherSolid; PelletsLargeCrystals;WHITE CRYSTALLINE POWDER. Uses: Dicyandiamide is used in the production of special resins, flame retardants, guanidine salts, etc., used as fillers in artificial leather, and used as a curing agent on adhesives. The printing and dyeing industry use dicyandiamide to manufacture fixing agents. The leather industry use it to make leather retanning agents. Water treatment industry use it to make decolorant or flocculant. It can be used in electroplating and manufacturing steel surface hardener. It can also be used as fertilizer nitrification inhibitor in agriculture. Electronic grade dicyandiamide is mainly used for epoxy resin curing agents in the manufacture of copper clad laminates for the electronic information industry, inner coating films for food and beverage metal packaging, high-grade non-toxic flame retardants, additives for food plastics, special pharmaceutical intermediates. Group: Nitrogen Flame Retardant. Grades: 99.5%, electronic grade 99.7%. CAS No. 461-58-5. Product ID: ACM461585. Molecular formula: C2H4N4. Mole weight: 84.08. IUPAC Name: 2-cyanoguanidine. Appearance: White crystal. Density: 1.400 @ 25 °C/4 °C;1.4 g/cm³. SMILES: NC(=N)NC#N.
Ferrous sulfate, >98% Quick inquiry Where to buy Suppliers range	Ferrous sulfate, >98%. Uses: Ferrous sulfate appears as a greenish or yellow-brown crystalline solid. Density 15.0 lb /gal. Melts at 64? and loses the seven waters of hydration at 90?. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment. Used for water or sewage treatment, as a fertilizer ingredient.;DryPowder; DryPowder, PelletsLargeCrystals; Liquid; OtherSolid; PelletsLargeCrystals. Group: Other Glass and Ceramic Materials. CAS No. 7720-78-7. IUPAC Name: iron(2+);sulfate. Molecular Weight: 151.91g/mol. Molecular Formula: FeO4S;FeO4S. SMILES: [O-]S(=O)(=O)[O-].[Fe+2]. InChI: InChI=1S/Fe.H2O4S/c;1-5(2,3)4/h;(H2,1,2,3,4)/q+2;/p-2. InChIKey: BAUYGSIQEAFULO-UHFFFAOYSA-L. Boiling Point: > 300 ?. Density: 1.9 at 59 °F (USCG, 1999);3.56 g/cu cm. Solubility: Soluble in water.
Fucus Vesiculosus (Seaweed) Extract Quick inquiry Where to buy Suppliers range	Fucus Vesiculosus, commonly known as bladderwrack or seaweed, is a type of brown algae found in the North Atlantic and Pacific oceans. Seaweed extracts are made from the dried leaves of Fucus Vesiculosus and are often used in skincare, as well as dietary supplements. Seaweed extract is rich in vitamins and minerals, including iodine, iron, zinc, magnesium, and vitamins A, C, and E. It also contains polyphenols and polysaccharides, which have antioxidant and anti-inflammatory properties. When used in skincare, Fucus Vesiculosus extract can help to hydrate and nourish the skin, promote collagen production, and protect against cell damage. It can also help to improve skin elasticity and smooth the appearance of fine lines and wrinkles. Uses: 1. Cosmetic industry: Fucus Vesiculosus extract is used in various cosmetic products including cleansers, toners, facial masks, and anti-aging creams due to its skin nourishing and anti-inflammatory properties. 2. Weight loss: Some studies suggest the use of Fucus Vesiculosus extract as a potential supplement for weight loss due to its ability to suppress appetite and enhance metabolism. 3. Medical industry: Fucus Vesiculosus extract is used in various medical applications, such as treating thyroid disorders, reducing blood pressure, and improving intestinal and digestive health. 4. Agricultural industry: Fucus Vesiculosus extract is used in agriculture as a soil conditioner and fertilizer due to its high mineral content and ability to improve soil structure. 5. Food industry: Fucus Vesiculosus extract is used as a food additive to provide flavor, nutrition, and texture to various food products. Group: Skin Actives. CAS No. 84696-13-9. Product ID: ACM84696139-1. Appearance: dark green or brown liquid with a distinct seaweed smell.
Phosphoric acid Quick inquiry Where to buy Suppliers range	Phosphoric acid. Uses: Phosphoric acid appears as a clear colorless liquid or transparent crystalline solid. The pure solid melts at 42.35? and has a density of 1.834 g / cm3. Liquid is usually an 85% aqueous solution. Shipped as both a solid and liquid. Corrosive to metals and tissue. Used in making fertilizers and detergents and in food processing.;Polyphosphoric acid is a viscous water-white odorless liquid. The commerical acid consists of a mixture of orthophosphoric acid, pyrophosphoric (diphosphoric) acid, triphosphoric and higher polymeric phosphoric acids. Sinks and mixes with water. (USCG, 1999);DryPowder; Liquid; OtherSolid;DryPowder; Liquid;Clear, colourless, viscous liquid; Solid; Solid; Solid; Solid; Solid; HYGROSCOPIC COLOURLESS CRYSTALS.;Thick, colorless, odorless, crystalline solid.;Thick, colorless, odorless, crystalline solid. [Note: Often used in an aqueous solution.]. Group: Electrolytes; Electronic Materials. CAS No. 7664-38-2. IUPAC Name: phosphoric acid. Molecular Weight: 97.995g/mol. Molecular Formula: H3PO4;H3O4P;H3PO4;H3PO4;H3O4P. SMILES: OP(=O)(O)O. InChI: InChI=1S/H3O4P/c1-5(2,3)4/h(H3,1,2,3,4). InChIKey: NBIIXXVUZAFLBC-UHFFFAOYSA-N. Boiling Point: greater than 266 °F at 760 mm Hg (USCG, 1999);1022 °F at 760 mm Hg (USCG, 1999);407 ?;415°F;415°F. Melting Point: 108 °F (NIOSH, 2016);100 °F (USCG, 1999);Mp 42.3 °;42.4 ?;42.35?;42 ?;108°F;108°F. Density: 1.892 at 77 °F (USCG, 1999);2.05 at 100.4 °F (USCG, 1999);d 1.86;1.8741 (100% solution); 1.6850 (85% solution); 1.334 (50% solution), all at 25 ? /Phosphoric acid solutions/;1.9 g/cm³;1.87 (pure) 1.33 (50% solution);(77°F): 1.87 (pure) 1.33 (50% solution). Solubility: Miscible (NIOSH, 2016);Sol in water;Soluble in water, alcohol; soluble in 8 volumes of 3:1 ether:alcohol mixture;Soluble in ethanol;548 g/100 g water at 20 ?;1000 mg/mL;Solubility in water: miscible;Miscible. Viscosity: 3.86 mPa.s (40% solution at 20 ?).
Polyformaldehyde Quick inquiry Where to buy Suppliers range	Polyformaldehyde. Uses: Solids containing varying amounts of formaldehyde, probably as paraformaldehyde (polymers of formula HO(CH2O)xH where x averages about 30). A hazard to the environment. Immediate steps should be taken to limit spread to the environment.;Formaldehyde, solution, flammable appears as a colorless aqueous solution of formaldehyde, which is a gas at ordinary conditions. Has a pungent irritating odor. Flash point varies from 122 to 141°F. Denser than water. The vapors are heavier than air and are highly irritating to the nose. Toxic if swallowed. Contact can cause severe injury to the skin accompanied by drying, cracking, and scaling. Used to make plastics, other chemicals, and fertilizers. Used as a preservative and a corrosion inhibitor. Rate of onset: Immediate Persistence: Hours Odor threshold: 1 ppm Source/use/other hazard: Disinfection/germicide; fungicide; textile; health care (tissue fixing).;Formaldehyde, solutions (formalin) (corrosive) appears as a colorless liquid with a pungent irritating odor. Contains 37-50% formaldehyde by mass and varying amounts of methanol, added to prevent precipitation of formaldehyde polymers (formaldehyde exists in solution as CH2(OH)2 and its polymers HO(CH2O)xH where x averages about three). Formalin free of methanol is also shipped but must be kept warm (about 30? (86°F)) to prevent polymerization. Pure formaldehyde, a gas, is not handled commercially because it tends to polymerize exothermally and may ignite. Vapor from formalin solution is flammable and an explosion hazard when exposed to flame or heat. Skin and eye irritant. Confirmed carcinogen.;Paraformaldehyde appears as a white solid with a light pungent odor. A linear polymer of formaldehyde of formula HO(CH2-O)xH where x averages about 30. Soluble in water when x is less than 12; higher polymers are not immediately soluble. Slow dissolution in water proceeds by means of hydrolysis to give fragments of lower x. Flammable, although may take some effort to ignite. Flash point 158°F. Used in fungicides, bactericides, and in the manufacture of adhesives. A hazard to the environment. Immediate steps should be taken to limit spread to the environment.;DryPowder; PelletsLargeCrystals;Liquid; OtherSolid, Liquid; PelletsLargeCrystals; Liquid; COLOURLES
Poly(Oxymethylene) Quick inquiry Where to buy Suppliers range	Poly(Oxymethylene). Uses: Solids containing varying amounts of formaldehyde, probably as paraformaldehyde (polymers of formula HO(CH2O)xH where x averages about 30). A hazard to the environment. Immediate steps should be taken to limit spread to the environment.;Formaldehyde, solution, flammable appears as a colorless aqueous solution of formaldehyde, which is a gas at ordinary conditions. Has a pungent irritating odor. Flash point varies from 122 to 141°F. Denser than water. The vapors are heavier than air and are highly irritating to the nose. Toxic if swallowed. Contact can cause severe injury to the skin accompanied by drying, cracking, and scaling. Used to make plastics, other chemicals, and fertilizers. Used as a preservative and a corrosion inhibitor. Rate of onset: Immediate Persistence: Hours Odor threshold: 1 ppm Source/use/other hazard: Disinfection/germicide; fungicide; textile; health care (tissue fixing).;Formaldehyde, solutions (formalin) (corrosive) appears as a colorless liquid with a pungent irritating odor. Contains 37-50% formaldehyde by mass and varying amounts of methanol, added to prevent precipitation of formaldehyde polymers (formaldehyde exists in solution as CH2(OH)2 and its polymers HO(CH2O)xH where x averages about three). Formalin free of methanol is also shipped but must be kept warm (about 30? (86°F)) to prevent polymerization. Pure formaldehyde, a gas, is not handled commercially because it tends to polymerize exothermally and may ignite. Vapor from formalin solution is flammable and an explosion hazard when exposed to flame or heat. Skin and eye irritant. Confirmed carcinogen.;Paraformaldehyde appears as a white solid with a light pungent odor. A linear polymer of formaldehyde of formula HO(CH2-O)xH where x averages about 30. Soluble in water when x is less than 12; higher polymers are not immediately soluble. Slow dissolution in water proceeds by means of hydrolysis to give fragments of lower x. Flammable, although may take some effort to ignite. Flash point 158°F. Used in fungicides, bactericides, and in the manufacture of adhesives. A hazard to the environment. Immediate steps should be taken to limit spread to the environment.;DryPowder; PelletsLargeCrystals;Liquid; OtherSolid, Liquid; PelletsLargeCrystals; Liquid; COLOURL
Polyphosphoric acid Quick inquiry Where to buy Suppliers range	Polyphosphoric acid. Uses: Phosphoric acid appears as a clear colorless liquid or transparent crystalline solid. The pure solid melts at 42.35? and has a density of 1.834 g / cm3. Liquid is usually an 85% aqueous solution. Shipped as both a solid and liquid. Corrosive to metals and tissue. Used in making fertilizers and detergents and in food processing.;Polyphosphoric acid is a viscous water-white odorless liquid. The commerical acid consists of a mixture of orthophosphoric acid, pyrophosphoric (diphosphoric) acid, triphosphoric and higher polymeric phosphoric acids. Sinks and mixes with water. (USCG, 1999);DryPowder; Liquid; OtherSolid;DryPowder; Liquid;Clear, colourless, viscous liquid; Solid; Solid; Solid; Solid; Solid; HYGROSCOPIC COLOURLESS CRYSTALS.;Thick, colorless, odorless, crystalline solid.;Thick, colorless, odorless, crystalline solid. [Note: Often used in an aqueous solution.]. Group: Electrolytes; Polymers. CAS No. 8017-16-1. IUPAC Name: phosphoric acid. Molecular Weight: 97.995g/mol. Molecular Formula: H3PO4;H3O4P;H3PO4;H3PO4;H3O4P. SMILES: OP(=O)(O)O. InChI: InChI=1S/H3O4P/c1-5(2,3)4/h(H3,1,2,3,4). InChIKey: NBIIXXVUZAFLBC-UHFFFAOYSA-N. Boiling Point: greater than 266 °F at 760 mm Hg (USCG, 1999);1022 °F at 760 mm Hg (USCG, 1999);407 ?;415°F;415°F. Melting Point: 108 °F (NIOSH, 2016);100 °F (USCG, 1999);Mp 42.3 °;42.4 ?;42.35?;42 ?;108°F;108°F. Density: 1.892 at 77 °F (USCG, 1999);2.05 at 100.4 °F (USCG, 1999);d 1.86;1.8741 (100% solution); 1.6850 (85% solution); 1.334 (50% solution), all at 25 ? /Phosphoric acid solutions/;1.9 g/cm³;1.87 (pure) 1.33 (50% solution);(77°F): 1.87 (pure) 1.33 (50% solution). Solubility: Miscible (NIOSH, 2016);Sol in water;Soluble in water, alcohol; soluble in 8 volumes of 3:1 ether:alcohol mixture;Soluble in ethanol;548 g/100 g water at 20 ?;1000 mg/mL;Solubility in water: miscible;Miscible. Viscosity: 3.86 mPa.s (40% solution at 20 ?).
Potassium Nitrate Quick inquiry Where to buy Suppliers range	Potassium Nitrate. Uses: Potassium nitrate appears as a white to dirty gray crystalline solid. Water soluble. Noncombustible, but accelerates the burning of combustible materials. If large quantities are involved in fire or the combustible material is finely divided an explosion may result. May explode under prolonged exposure to heat or fire. Toxic oxides of nitrogen are produced in fires. Used in solid propellants, explosives, fertilizers.;DryPowder; DryPowder, PelletsLargeCrystals; Liquid; OtherSolid; PelletsLargeCrystals;White crystalline powder or transparent prisms having a cooling, saline, pungent taste;COLOURLESS-TO-WHITE CRYSTALLINE POWDER. Group: Glass Additives. IUPAC Name: potassium;nitrate. Molecular Weight: 101.103g/mol. Molecular Formula: KNO3;KNO3;KNO3;KNO3. SMILES: [N+](=O)([O-])[O-].[K+]. InChI: InChI=1S/K.NO3/c;2-1(3)4/q+1;-1. InChIKey: FGIUAXJPYTZDNR-UHFFFAOYSA-N. Boiling Point: 752 °F at 760 mm Hg (decomposes) (USCG, 1999);400 ? (decomp). Melting Point: 633.2 °F (USCG, 1999);Mp 334 °;337 ?;333-334 ?. Density: 2.109 (USCG, 1999);2.1 at 25 ?;2.1 g/cm³. Solubility: 35g/100ml;Sol in water, glycerol; slightly sol in alcohol;Insoluble in ethanol;1 g/2.8 mL water at about 25 ?; 1 g/0.5 mL boiling water; 1 g/620 mL alcohol;38.3 g/100 g water at 25 ?;247 g/100 cc water at 100 ?;Insol in absolute alcohol;0.34 wt% in methanol at 25 ?;Solubility in water, g/100ml at 25 ?: 35.7.
SGS Halogen Free Odorless APP Ammonium Polyphosphate Quick inquiry Where to buy Suppliers range	Water Soluble APP; Degree of polymerization: low. Uses: Can be used for fireproof treatment for spay or immersion for wood, textile, paper and fiber application. Water solution is used for the flame retardant treatment. To prepare 15-25%P-N flame retardant, used solely or together with other materials in the flameproof treatment for textiles, papers, fibers and woods, etc. To apply by autoclave, immersion or by spray both ok. If special treatment, it can be used to prepare high-concentration flameproof liquid to 50% to meet the requirement of special production. Used for flame retardant in water based fire extinguisher. Used for high concentration of binary compound fertilizer, slow released fertilizer. Group: Ammonium Polyphosphate. Product ID: ACMA00024454. Appearance: TF-301,TF-302 (Low arsenic):White powder or lumps;TF-303(high P content),TF-304( low arsenic):White crystalline powder.
Water Soluble Polyphosphoric Acids Halogen Free Flame Retardant Quick inquiry Where to buy Suppliers range	Ammonium Polyphosphate. Uses: 1. Aqueous solution is used for the retardant treatment.To prepare 15-25%P-N flame retardant, used solely or together with other materials in the flameproof treatment for textiles, papers, fibers and woods, etc. To apply by autoclave, immersion or by spray both ok. If special treatment, it can be used to prepare high-concentration flameproof liquid to 50% to meet the flameproof requirement of special production. 2. It also can be used as flame retardant in water based fire extinguisher and wood varnish. 3. It is also used as a high concentration of binary compound fertilizer, slow released fertilizer. Group: Ammonium Polyphosphate. Product ID: ACMA00023620.