Liquid Nitrogen USA - Refrigerated Liquid Nitrogen

Liquid Nitrogen alternative names:

Nitrogen, Refrigerated Liquid Nitrogen, LIN, Cryogenic fluid, Inert gas. Industrial abbreviations for Liquid nitrogen, LN2. UN number 1977. CAS No: 7727-37-9.. Formula: N2

Where to buy Liquid Nitrogen in the USA

We have compiled a list of Liquid Nitrogen suppliers in the USA, including: manufacturers, distributors, wholesalers, industrial, retail and bulk suppliers. Use the suppliers website link for prices, more information or to purchase. To find other products or services, use the search box.

Product Description
1,1,1,3,3,3-Hexamethyldisilazane
Where to buy Suppliers range
1,1,1,3,3,3-Hexamethyldisilazane. Uses: Hexamethyl disilazane appears as a liquid. May be toxic by ingestion. Irritates skin and eyes. Vapors are heavier than air. May emit highly toxic nitrogen oxide fumes when heated to decomposition. Used to make other chemicals.;Liquid; WetSolid. Group: Self Assembly and Contact Printing Materials. CAS No. 999-97-3. IUPAC Name: [dimethyl-(trimethylsilylamino)silyl]methane. Molecular Weight: 161.39g/mol. Molecular Formula: C6H19NSi2. SMILES: C[Si](C)(C)N[Si](C)(C)C. InChI: InChI=1S/C6H19NSi2/c1-8(2,3)7-9(4,5)6/h7H,1-6H3. InChIKey: FFUAGWLWBBFQJT-UHFFFAOYSA-N. Boiling Point: 125.0 ?;125 ?. Flash Point: 48 °F (NFPA, 2010);81 °F (27 ?) closed cup;14 ? (closed cup) /from table/. Density: 0.7741 g/cu cm at 25 ?. Solubility: Soluble in acetone, benzene, ethyl ether, heptane, perchloroethylene;Insol in water, reacts slowly;In water, 392 mg/l @ 25 ? /Estimated/. Viscosity: 0.90 centistokes. Alfa Chemistry Materials 3
1,2-Diaminoethane
Where to buy Suppliers range
1,2-Diaminoethane. Uses: Ethylenediamine appears as a clear colorless liquid with an ammonia-like odor. Flash point of 91°F and a melting point of 47°F. Corrosive to tissue. Vapors are heavier than air. Produces toxic oxides of nitrogen during combustion. Density 7.5 lb / gal. Used to make other chemicals and as a fungicide.;Liquid;Liquid;COLOURLESS-TO-YELLOW HYGROSCOPIC LIQUID WITH PUNGENT ODOUR.;Colorless, viscous liquid with an ammonia-like odor.;Colorless, viscous liquid with an ammonia-like odor. [fungicide] [Note: A solid below 47°F.]. Group: Polymers. IUPAC Name: ethane-1,2-diamine. Molecular Weight: 60.1g/mol. Molecular Formula: H2NCH2CH2NH2; C2H8N2; NH2CH2CH2NH2; C2H8N2. SMILES: C(CN)N. InChI: InChI=1S/C2H8N2/c3-1-2-4/h1-4H2. InChIKey: PIICEJLVQHRZGT-UHFFFAOYSA-N. Boiling Point: 241 °F at 760 mm Hg (EPA, 1998);117.0 ?;116-117 ?;117 ?;241°F;241°F. Melting Point: 46 °F (EPA, 1998);11.1 ?;8.5 ?;11?;8.5 ?;47°F;47°F. Flash Point: 93 °F (EPA, 1998);104 °F (40 ?) CLOSED CUP, 150 °F (66 ?) OPEN CUP /ANHYDROUS 76%/;110 °F (closed cup);33.9 ? (open cup), 43.3 ? (closed cup);34 ? c.c.;93°F;93°F. Density: 0.898 at 77 °F (EPA, 1998);0.898 @ 25 ?/4 ?;Relative density (water = 1): 0.9;0.91;0.91. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);16.64 M;Sol in benzene unless insufficiently dried; slightly sol in ether;SOL IN ALL PROPORTIONS IN ETHYL ALCOHOL; VERY SOL IN WATER;Water solubility = 1X10+6 mg/l;Miscible with water, oxygenated and aromatic solvents;1000 mg/mL;Solubility in water: miscible;Miscible. Viscosity: 0.0154 cP @ 25 ?;0.0154 cP at 25 ?. Alfa Chemistry Materials 4
1,6-Diaminohexane
Where to buy Suppliers range
1,6-Diaminohexane. Uses: Hexamethylenediamine, solid is a colorless crystalline solid. It is soluble in water. It is corrosive to metals and tissue. Produces toxic oxides of nitrogen during combustion.;Hexamethylenediamine, solution appears as a clear colorless liquid. Burns although some effort is required to ignite. Soluble in water. Corrosive to metals and tissue. Produces toxic oxides of nitrogen during combustion. Used to make nylon.;Liquid; WetSolid, Liquid;HYGROSCOPIC PELLETS OR FLAKES WITH CHARACTERISTIC ODOUR.;Colorless crystalline solid or clear liquid. Group: Monomers. CAS No. 124-09-4. IUPAC Name: hexane-1,6-diamine. Molecular Weight: 116.2g/mol. Molecular Formula: C6H16N2;C6H16N2. SMILES: C(CCCN)CCN. InChI: InChI=1S/C6H16N2/c7-5-3-1-2-4-6-8/h1-8H2. InChIKey: NAQMVNRVTILPCV-UHFFFAOYSA-N. Boiling Point: 401 °F at 760 mm Hg (NTP, 1992);205.0 ?;205 ?;199-205 ?;401°F. Melting Point: 108 °F (NTP, 1992);41.5 ?;42 ?;23-41 ?;108°F. Flash Point: 178 °F (NTP, 1992);160 °F OC;85 ? c.c.;178°F. Density: (anhyd.) 0.799 at 140.0° F (70% soln.) 0.933 at 20? (USCG, 1999);(anhyd) 0.799 at 60 ? (liquid);Relative density (water = 1): 0.93;0.799 at 140°F (70% sol), 0.933 at 20?. Solubility: greater than or equal to 100 mg/mL at 73° F (NTP, 1992);FREELY SOL IN WATER; SLIGHTLY SOL IN ALC, BENZENE;SOMEWHAT SOL IN ETHER;Water solubility = 2,460,000 mg/l at 4.5 ?;Solubility in water: soluble. Alfa Chemistry Materials 3
1-Amino-2-Propanol
Where to buy Suppliers range
1-Amino-2-Propanol. Uses: Monoisopropanolamine appears as a colorless liquid with a slight ammonia-like odor. Less dense than water and soluble in water. Flash point 165°F. Corrosive to metals and tissue. Vapors are heavier than air. Produces toxic oxides of nitrogen during combustion. Used in plastics, paints, cutting oils, and specialized cleaning compounds.; Liquid; Solid; Solid; COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR.;Colourless to faint yellow liquid; Fishy aroma;A colorless liquid with a slight ammonia-like odor. Group: Polymers. IUPAC Name: 1-aminopropan-2-ol. Molecular Weight: 75.11g/mol. Molecular Formula: C3H9NO;CH3CHOHCH2NH2;C3H9NO. SMILES: CC(CN)O. InChI: InChI=1S/C3H9NO/c1-3(5)2-4/h3,5H,2,4H2,1H3. InChIKey: HXKKHQJGJAFBHI-UHFFFAOYSA-N. Boiling Point: 313 to 316 °F at 758 mm Hg (NTP, 1992);160.0 ?;159.46 ? @ 760 MM HG;159.5 ?;313-316°F. Melting Point: 34.5 °F (NTP, 1992);25.0 ?;24-26 ?;1.74 ?;1 ?;34.5°F. Flash Point: 171 °F (NTP, 1992);171 °F (77 ?) (closed cup);77 ? c.c.;171°F. Density: 0.961 at 68 °F (USCG, 1999);0.9611 @ 20 ?/4 ?;0.96 g/cm³;Relative density of the vapour/air-mixture at 20 ? (air = 1): 1.00;0.970-0.976;0.961. Solubility: greater than or equal to 100 mg/mL at 67.6° F (NTP, 1992);13.31 M;4th ed, 2:3 (1992)];SOL IN ALL PROPORTIONS IN WATER, ALC, ETHER, ACETONE, BENZENE, CARBON TETRACHLORIDE.;Solubility in water: soluble;Soluble in water;Soluble (in ethanol). Viscosity: 24 mm2/s at 25 ?. Alfa Chemistry Materials 4
2,3-Dichloroaniline
Where to buy Suppliers range
2,3-Dichloroaniline. Uses: Dichloroanilines appears as an amber to brown crystalline solid. Shipped as a solid or in a liquid carrier. Insoluble in water. It is toxic by skin absorption and by inhalation. Produces toxic oxides of nitrogen during combustion. Used in the manufacture of dyes and pesticides.;COLOURLESS CRYSTALS OR LIQUID. Group: Polymers. IUPAC Name: 2,3-dichloroaniline. Molecular Weight: 162.01g/mol. Molecular Formula: C6H5Cl2N;(C6H3)Cl2(NH2);C6H5Cl2N. SMILES: C1=CC(=C(C(=C1)Cl)Cl)N. InChI: InChI=1S/C6H5Cl2N/c7-4-2-1-3-5(9)6(4)8/h1-3H,9H2. InChIKey: BRPSAOUFIJSKOT-UHFFFAOYSA-N. Boiling Point: 252.0 ?;252 ?;252 ?. Melting Point: 24.0 ?;24 ?;24 ?. Flash Point: >112 ? (closed cup);>112 ? c.c. Density: 1.383 @ 25 ?;Relative density (water = 1): 1.383. Solubility: VERY SOL IN ETHER; SLIGHTLY SOL IN PETROLEUM ETHER, BENZENE;Sol in alcohol, acetone;Solubility in water: none. Alfa Chemistry Materials 4
2D cryopreservation tube series
Where to buy Suppliers range
Due to 2D coding system with unique image forming, used for sample base management, espcecial for liquid nitrogen ultra-lowfreezer.Self-standing,Transparent,Writing-space. Uses: Used for research and manufacturing. Group: Plastic Packaging. Product ID: PM-053. CD Formulation
2-(Dimethylamino)ethyl Methacrylate (stabilized with MEHQ)
Where to buy Suppliers range
2-(Dimethylamino)ethyl Methacrylate (stabilized with MEHQ). Uses: 2-dimethylaminoethyl methacrylate appears as a clear colorless liquid. Less dense than water and insoluble in water. Vapors heavier than air and corrosive to eyes and mucous membranes. May polymerize exothermically if heated or contaminated. If polymerization takes place inside a closed container, the container may rupture violently. Produces toxic oxides of nitrogen during combustion. Toxic by skin absorption, ingestion and inhalation. Used to make plastics and in textiles.;Liquid;COLOURLESS-TO-LIGHT-YELLOW LIQUID. Group: Monomers. CAS No. 2867-47-2. IUPAC Name: 2-(dimethylamino)ethyl 2-methylprop-2-enoate. Molecular Weight: 157.21g/mol. Molecular Formula: C8H15NO2;C8H15NO2. SMILES: CC(=C)C(=O)OCCN(C)C. InChI: InChI=1S/C8H15NO2/c1-7(2)8(10)11-6-5-9(3)4/h1,5-6H2,2-4H3. InChIKey: JKNCOURZONDCGV-UHFFFAOYSA-N. Boiling Point: 186.0 ?;186 ?;186 ?. Melting Point: -30.0 ?;-30 ? (freezing point);-30 ?. Flash Point: 165 °F (NFPA, 2010);64 ? (147 °F) - closed cup;165 °F (74 ?) (open cup);68 ? c.c. Density: Specific gravity: 0.933 at 25 ?;Relative density (water = 1): 0.93. Solubility: In water, 1000 g/L at 20 ? (study performed without adjustment of pH value);Solubility in water, g/100ml at 25 ?: 10.6. Viscosity: 1.34 mPa s at 25 ?. Alfa Chemistry Materials 3
2-(Dimethylamino)ethyl Methacrylate, (stabilized with MEHQ)
Where to buy Suppliers range
2-(Dimethylamino)ethyl Methacrylate, (stabilized with MEHQ). Uses: 2-dimethylaminoethyl methacrylate appears as a clear colorless liquid. Less dense than water and insoluble in water. Vapors heavier than air and corrosive to eyes and mucous membranes. May polymerize exothermically if heated or contaminated. If polymerization takes place inside a closed container, the container may rupture violently. Produces toxic oxides of nitrogen during combustion. Toxic by skin absorption, ingestion and inhalation. Used to make plastics and in textiles.;Liquid;COLOURLESS-TO-LIGHT-YELLOW LIQUID. Group: Polymers. CAS No. 2867-47-2. IUPAC Name: 2-(dimethylamino)ethyl 2-methylprop-2-enoate. Molecular Weight: 157.21g/mol. Molecular Formula: C8H15NO2;C8H15NO2. SMILES: CC(=C)C(=O)OCCN(C)C. InChI: InChI=1S/C8H15NO2/c1-7(2)8(10)11-6-5-9(3)4/h1,5-6H2,2-4H3. InChIKey: JKNCOURZONDCGV-UHFFFAOYSA-N. Boiling Point: 186.0 ?;186 ?;186 ?. Melting Point: -30.0 ?;-30 ? (freezing point);-30 ?. Flash Point: 165 °F (NFPA, 2010);64 ? (147 °F) - closed cup;165 °F (74 ?) (open cup);68 ? c.c. Density: Specific gravity: 0.933 at 25 ?;Relative density (water = 1): 0.93. Solubility: In water, 1000 g/L at 20 ? (study performed without adjustment of pH value);Solubility in water, g/100ml at 25 ?: 10.6. Viscosity: 1.34 mPa s at 25 ?. Alfa Chemistry Materials 4
2-Phenylpyridine
Where to buy Suppliers range
2-Phenylpyridine. Group: Nitrogen-Donor Ligands. Alternative Names: O-Phenylpyridine. Grades: 98%. CAS No. 1008-89-5. Product ID: ACM1008895-2. Molecular formula: C11H9N. Mole weight: 155.20. IUPAC Name: 2-phenylpyridine. Appearance: Yellow liquid. EC Number: 213-763-1. Density: 1.086 g/mL. SMILES: C1=CC=C(C=C1)C2=CC=CC=N2. Alfa Chemistry. 4
3,3'-Bipyridyl
Where to buy Suppliers range
3,3'-Bipyridyl. Group: Nitrogenated Organic Linkers. Alternative Names: 3,3'-Bipyridine;3,3'-Dipyridyl. Grades: >98.0%(GC)(T). CAS No. 581-46-4. Product ID: ACM581464-1. Molecular formula: C10H8N2. Mole weight: 156.19. Appearance: Colorless to Light yellow to Light orange clear liquid. Melting Point: 151 °C. Storage: Store under inert gas. InChI: InChI=1S/C10H8N2/c1-3-9(7-11-5-1)10-4-2-6-12-8-10/h1-8H. InChIKey: OFDVABAUFQJWEZ-UHFFFAOYSA-N. Alfa Chemistry. 5
(4S,4'S)-2,2'-(Propane-2,2-diyl)bis(4-phenyl-4,5-dihydrooxazole)
Where to buy Suppliers range
(4S,4'S)-2,2'-(Propane-2,2-diyl)bis(4-phenyl-4,5-dihydrooxazole). Group: Nitrogen-Donor Ligands. Alternative Names: (S,S)-ph-box; (S,S)-2,2'-Isopropylidenebis(4-phenyl-2-oxazoline). CAS No. 131457-46-0. Product ID: ACM131457460-1. Molecular formula: C21H22N2O2. Mole weight: 334.41. IUPAC Name: (4S)-4-phenyl-2-[2-[(4S)-4-phenyl-4,5-dihydro-1,3-oxazol-2-yl]propan-2-yl]-4,5-dihydro-1,3-oxazole. Appearance: Viscous liquid. SMILES: CC (C) (C1=NC (CO1)C2=CC=CC=C2)C3=NC (CO3)C4=CC=CC=C4. Alfa Chemistry. 4
Acrylamide Monomer
Where to buy Suppliers range
Acrylamide Monomer. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Monomers. CAS No. 79-06-1. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility in water, g/100ml at 25 ?: 20 Alfa Chemistry Materials 4
Acrylamide Monomer (ca. 50% in Water)
Where to buy Suppliers range
Acrylamide Monomer (ca. 50% in Water). Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Monomers. CAS No. 79-06-1. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility in water, Alfa Chemistry Materials 4
Acrylamide Monomer [for Electrophoresis]
Where to buy Suppliers range
Acrylamide Monomer [for Electrophoresis]. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Monomers. CAS No. 79-06-1. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility in wate Alfa Chemistry Materials 4
Acrylamide Monomer, [for Electrophoresis]
Where to buy Suppliers range
Acrylamide Monomer, [for Electrophoresis]. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 79-06-1. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility in wat Alfa Chemistry Materials 4
Acrylamide Polymer (Mw.=400000-800000) (containing small amounts of formalin as fungicide) (10% in Water)
Where to buy Suppliers range
Acrylamide Polymer (Mw.=400000-800000) (containing small amounts of formalin as fungicide) (10% in Water). Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 9003-5-8. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane Alfa Chemistry Materials 4
Acrylamide, Ultrapure, Electrophoresis Grade
Where to buy Suppliers range
Acrylamide, Ultrapure, Electrophoresis Grade. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 79-06-1. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility in Alfa Chemistry Materials 4
Acrylonitrile
Where to buy Suppliers range
Acrylonitrile. Uses: Acrylonitrile, stabilized appears as a clear colorless liquid with a strong pungent odor. Flash point 32°F. Prolonged exposure to the vapors or skin contact harmful. Density 6.7 lb / gal. Vapors heavier than air. Combustion produces toxic oxides of nitrogen. Requires storage and handling in closed systems. Used in insecticides and to make plastics, fibers and other chemicals. Rate of onset: Immediate Persistence: Minutes to hours Odor threshold: 17 ppm Source/use/other hazard: Plastics, coatings, adhesives industries; dyes; pharmaceuticals; flam gas.;Liquid;COLOURLESS OR PALE YELLOW LIQUID WITH PUNGENT ODOUR.;Colorless to pale-yellow liquid with an unpleasant odor.;Colorless to pale-yellow liquid with an unpleasant odor. [Note: Odor can only be detected above the PEL.]. Group: Polymers. IUPAC Name: prop-2-enenitrile. Molecular Weight: 53.06g/mol. Molecular Formula: C3H3N;CH2=CH-CN;H2C(CH)CN;C3H3N. SMILES: C=CC#N. InChI: InChI=1S/C3H3N/c1-2-3-4/h2H,1H2. InChIKey: NLHHRLWOUZZQLW-UHFFFAOYSA-N. Boiling Point: 171 °F at 760 mm Hg (EPA, 1998);77.3 ?;77.2 ?;77 ?;171°F;171°F. Melting Point: -116 °F (EPA, 1998);-83.5 ?;-83.51 ?;-84 ?;-116°F;-116°F. Flash Point: 32 °F (EPA, 1998);-5 ? (23 °F) - closed cup;32 °F(0 ?)(open cup);-1 ? c.c.;30°F;30°F. Density: 0.8004 at 77 °F (EPA, 1998);0.8007 at 25 ?;1.14-1.17;Relative density (water = 1): 0.8;0.81;0.81. Solubility: 10 to 50 mg/mL at 70.9° F (NTP, 1992);1.40 M;In water, 7.45X10+4 mg/L at 25 ?;Very soluble in ethanol, acetone, benzene, ether;Acrylonitrile is. miscible with ethanol, carbon tetrachloride, ethyl acetate, ethylene cyanohydrin, liquid carbon dioxide. toluene, petroleum ether, and xylene.;SOL IN DIMETHYLSULFOXIDE, DIMETHYLACETAMIDE, DIMETHYLFORMAMIDE;SOL IN MALEIC ANHYDRIDE, NITRILES, NITROPHENOLS, ETHYLENE CARBONATE, HOT BUTYROLACTONE; INSOL IN ALC, ACETONE, BENZENE, CARBON TETRACHLORIDE, PETROLEUM ETHER;Solubility in water, g/100ml at 20 ?: 7;7%. Viscosity: 0.34 sq mm/s at 25 ?. Alfa Chemistry Materials 4
Aniline
Where to buy Suppliers range
Aniline. Uses: Aniline appears as a yellowish to brownish oily liquid with a musty fishy odor. Melting point -6?; boiling point 184?; flash point 158°F. Denser than water (8.5 lb / gal) and slightly soluble in water. Vapors heavier than air. Toxic by skin absorption and inhalation. Produces toxic oxides of nitrogen during combustion. Used to manufacture other chemicals, especially dyes, photographic chemicals, agricultural chemicals and others.;Liquid; PelletsLargeCrystals; Liquid; COLOURLESS OILY LIQUID WITH CHARACTERISTIC ODOUR. TURNS BROWN ON EXPOSURE TO AIR OR LIGHT.;Colorless to brown, oily liquid with an aromatic amine-like odor.;Colorless to brown, oily liquid with an aromatic amine-like odor. [Note: A solid below 21°F.]. Group: Polymers. IUPAC Name: aniline. Molecular Weight: 93.13g/mol. Molecular Formula: C6H7N;C6H5NH2;C6H7N. SMILES: C1=CC=C(C=C1)N. InChI: InChI=1S/C6H7N/c7-6-4-2-1-3-5-6/h1-5H,7H2. InChIKey: PAYRUJLWNCNPSJ-UHFFFAOYSA-N. Boiling Point: 363 to 367 °F at 760 mm Hg (EPA, 1998);184.1 ?;184.1 ?;184 ?;363°F;363°F. Melting Point: 21 °F (EPA, 1998);-6.0 ?;-6.0 ?;-6?;-6 ?;21°F;21°F. Flash Point: 158 °F (EPA, 1998);70 ? (158 °F) - closed cup;169 °F (76 ?) - Closed cup;76 ? c.c.;158°F;158°F. Density: 1.022 at 68 °F (EPA, 1998);1.0217 at 20 ?/20 ?;Relative density (water = 1): 1.02;1.02;1.02. Solubility: 10 to 50 mg/mL at 73° F (NTP, 1992);0.39 M;In water, 36,000 mg/L at 25 ?;3.5 parts/100 parts water at 25 ?; 6.4 parts/100 parts water at 90 ?;One gram dissolves in 28.6 mL water, 15.7 mL boiling water;Soluble in water;Soluble in alcohol, ether, and benzene;Soluble in carbon tetrachloride and ligroin; miscible in ethanol, ethyl ether, benzene and acetone.;Miscible with lipids; soluble in dilute hydrochloric acid;Miscible with vegetable oils, essential oils;36 mg/mL at 25 ?;Solubility in water, g/100ml at 20 ?: 3.4;4%. Viscosity: 4.35 cP at 20 ?; 1.62 cP at 60 ?. Alfa Chemistry Materials 4
Cationic Polyacrylamide
Where to buy Suppliers range
Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Other Nanomaterials. CAS No. 9003-5-8. IUPAC Name: prop-2-enamide. Molecular Weight: C3H5NO. Molecular Formula: 3-16 Million (adjustable). SMILES: C=CC(=O)N. Purity: 99.9%. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Alfa Chemistry Materials 7
Cationic Polyacrylamide
Where to buy Suppliers range
Cationic Polyacrylamide. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 9003-5-8. IUPAC Name: prop-2-enamide. Molecular Weight: 3-16 Million (adjustable). Molecular Formula: C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Purity: 99.9%. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility in water, g/100ml at Alfa Chemistry Materials 4
Cobalt bis(2-ethylhexanoate)
Where to buy Suppliers range
Purple liquid. Uses: Liquid. Group: Solution Deposition Precursors. Alternative Names: Cobalt(II)bis(2-ethylhexanoate). CAS No. 136-52-7. IUPAC Name: cobalt(2+);2-ethylhexanoate. Molecular Weight: 345.34g/mol. Molecular Formula: C16H30CoO4. SMILES: CCCCC(CC)C(=O)[O-].CCCCC(CC)C(=O)[O-].[Co+2]. InChI: InChI=1S/2C8H16O2.Co/c2*1-3-5-6-7(4-2)8(9)10;/h2*7H,3-6H2,1-2H3,(H,9,10);/q;;+2/p-2. InChIKey: QAEKNCDIHIGLFI-UHFFFAOYSA-L. Boiling Point: Decomposes at approximately 90 deg before boiling if heated in an aluminum crucible under nitrogen. Melting Point: Melts in the range between 53-58 ? if heated in an aluminum crucible under nitrogen; melts under decomposition in the range between 64-84 ? if heated in an glass capillary under air. Purity: 12%Co. Density: 1.25 at 21.6 ? /OECD Guideline 109 (Density of Liquids and Solids)/. Solubility: In water, 25.05 g/L at 20 ?, pH 6.97 (after 72 hours shaking); 6.3 g/L at 37 ?, pH 6.31-6.54 (after 72 hours shaking);Solubility in water, 40.3 g/L at 20 ?, pH 6.8 /OECD Guideline 105 (Water Solubility)/. Alfa Chemistry Materials
Cyclohexylamine
Where to buy Suppliers range
Cyclohexylamine. Uses: Cyclohexylamine appears as a clear colorless to yellow liquid with an odor of ammonia. Flash point 90°F. Irritates the eyes and respiratory system. Skin contact may cause burns. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion.;Liquid; PelletsLargeCrystals, Liquid;Liquid;COLOURLESS-TO-YELLOW LIQUID WITH PUNGENT ODOUR.;Colorless to yellow liquid with an odor of ammonia.;Colorless or yellow liquid with a strong, fishy, amine-like odor. Group: Polymers. IUPAC Name: cyclohexanamine. Molecular Weight: 99.17g/mol. Molecular Formula: C6H11NH2;C6H13N;C6H13N. SMILES: C1CCC(CC1)N. InChI: InChI=1S/C6H13N/c7-6-4-2-1-3-5-6/h6H,1-5,7H2. InChIKey: PAFZNILMFXTMIY-UHFFFAOYSA-N. Boiling Point: 274.1 °F at 760 mm Hg (EPA, 1998);134.0 ?;134.5 ? @ 760 mm Hg;134.5 ?;274°F;274°F. Melting Point: 0.1 °F (EPA, 1998);-17.7 ?;-17.7 ?;-18?;-17.7 ?;0.1°F;0°F. Flash Point: 88 °F (EPA, 1998);88 °F, 31 ? (Closed Cup);28 ? c.c.;88°F;88°F. Density: 0.8647 at 77 °F (EPA, 1998);0.8647 @ 25 ?/25 ?;Relative density (water = 1): 0.86;0.87;0.87. Solubility: Very soluble (NTP, 1992);10.08 M;Very soluble in ethanol, miscible in ether and acetone.;Miscible with common organic solvents: alcohol, ethers, ketones, esters, aliphatic hydrocarbons; completely miscible with aromatic hydrocarbons.;SOL IN CHLORINATED HYDROCARBONS, MINERAL OIL, PEANUT OIL AND SOYA BEAN OIL;Miscible with water.;1000 mg/mL at 20 ?;Solubility in water: miscible;Miscible. Viscosity: 2.10 Pa*s at 20 ?. Alfa Chemistry Materials 4
Dicyandiamide
Where to buy Suppliers range
DryPowder; Liquid; OtherSolid; PelletsLargeCrystals;WHITE CRYSTALLINE POWDER. Uses: Dicyandiamide is used in the production of special resins, flame retardants, guanidine salts, etc., used as fillers in artificial leather, and used as a curing agent on adhesives. The printing and dyeing industry use dicyandiamide to manufacture fixing agents. The leather industry use it to make leather retanning agents. Water treatment industry use it to make decolorant or flocculant. It can be used in electroplating and manufacturing steel surface hardener. It can also be used as fertilizer nitrification inhibitor in agriculture. Electronic grade dicyandiamide is mainly used for epoxy resin curing agents in the manufacture of copper clad laminates for the electronic information industry, inner coating films for food and beverage metal packaging, high-grade non-toxic flame retardants, additives for food plastics, special pharmaceutical intermediates. Group: Nitrogen Flame Retardant. Grades: 99.5%, electronic grade 99.7%. CAS No. 461-58-5. Product ID: ACM461585. Molecular formula: C2H4N4. Mole weight: 84.08. IUPAC Name: 2-cyanoguanidine. Appearance: White crystal. Density: 1.400 @ 25 °C/4 °C;1.4 g/cm³. SMILES: NC(=N)NC#N. Alfa Chemistry. 4
Diethylamine
Where to buy Suppliers range
Diethylamine. Uses: Diethylamine appears as a clear colorless liquid with an ammonia-like odor. Density 5.9 lb / gal. Flash point -15°F. A respiratory irritant. Corrosive to the eyes and skin. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion.; Liquid; liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid with a fishy, ammonia-like odor.;Colorless liquid with a fishy, ammonia-like odor. Group: Polymers. IUPAC Name: N-ethylethanamine. Molecular Weight: 73.14g/mol. Molecular Formula: C4H11N;(C2H5)2NH;(C2H5)2NH;C4H11N. SMILES: CCNCC. InChI: InChI=1S/C4H11N/c1-3-5-4-2/h5H,3-4H2,1-2H3. InChIKey: HPNMFZURTQLUMO-UHFFFAOYSA-N. Boiling Point: 131.9 °F at 760 mm Hg (NTP, 1992);55.5 ?;55.5 ?;55.5 ?;132°F;132°F. Melting Point: -58 °F (NTP, 1992);-50.0 ?;-50 ?;-50 ?;-50?;-50 ?;-58°F;-58°F. Flash Point: -20 °F (NTP, 1992);-22.99 ? (-9.38 °F) - closed cup;< -26 ?, closed cup;5 °F open cup;Less than - 17.8 ? closed cup;-28 ? c.c.;-15°F;-15°F. Density: 0.708 at 68 °F (USCG, 1999);0.7056 g/cu cm at 20 ?;Relative density (water = 1): 0.7;0.71;0.71. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);13.67 M;1000 mg/mL at 25 ?;In water, infinitely soluble /1X10+6 mg/L/ at 25 ?;Miscible with water, alcohol;Soluble in ether and carbon tetrachloride;Miscible with most organic solvents;Sol in chloroform;Soluble in paraffin hydrocarbons, aromatic and aliphatic hydrocarbons, fixed oils, mineral oils, oleic and stearic acids;Solubility in water: miscible;Miscible. Viscosity: 0.319 mPa.s at 25 ?; 0.239 mPa.s at 50 ?. Alfa Chemistry Materials 4
Dimethyl Ethanolamine
Where to buy Suppliers range
Dimethyl Ethanolamine. Uses: 2-dimethylaminoethanol appears as a clear colorless liquid with a fishlike odor. Flash point 105°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR. Group: Polymers. IUPAC Name: 2-(dimethylamino)ethanol. Molecular Weight: 89.14g/mol. Molecular Formula: C4H11NO;(CH3)2NCH2CH2OH;C4H11NO. SMILES: CN(C)CCO. InChI: InChI=1S/C4H11NO/c1-5(2)3-4-6/h6H,3-4H2,1-2H3. InChIKey: UEEJHVSXFDXPFK-UHFFFAOYSA-N. Boiling Point: 275 °F at 758 mm Hg (NTP, 1992);134.0 ?;134.1 ?;135 ?. Melting Point: -74 °F (NTP, 1992);-59.0 ?;-65 ?;-59?;-59 ?. Flash Point: 105 °F (NTP, 1992);105 °F open cup;38 ? c.c. Density: 0.887 at 68 °F (USCG, 1999);0.8866 g/cu cm at 20 ?;Relative density (water = 1): 0.89. Solubility: greater than or equal to 100 mg/mL at 73° F (NTP, 1992);11.22 M;Miscible with water;Miscible with alcohol, ether;Miscible with acetone, benzene;1000 mg/mL;Solubility in water: miscible. Viscosity: 3.5839 mPa.s at 21.6 ?. Alfa Chemistry Materials 4
Fenhexamid
Where to buy Suppliers range
Fenhexamid is an anti-botrytis fungicide widely used against a broad spectrum of fungi in agricultural crops. Its mode of action involves the inhibition of sterol biosynthesis. Fenhexamid may be used as a standard in the determination of fenhexamid in: Fruits using enzyme-linked immunosorbent assay (ELISA). Tomatoes, grape and wine samples using high-performance liquid chromatography coupled with ultraviolet detector and gas chromatography (GC) coupled with detectors such as nitrogen-phosphorus detector (NPD), electron capture detector (ECD) and ion trap mass spectrometry (ITMS). Group: Biochemicals. Alternative Names: N- (2, 3-Dichloro-4-hydroxyphenyl) -1- methyl cyclohexane carboxamide; Decree; Elevate; KBR 2738; Teldor. CAS No. 126833-17-8. Pack Sizes: 250mg, 500mg, 1g. Molecular Formula: C??H??Cl?NO?, Molecular Weight: 302.2. US Biological Life Sciences. USBiological 2
Worldwide
Graphene Nitrogen-doped (GNdp) Nanopowder
Where to buy Suppliers range
Graphene Nitrogen-doped (GNdp) Nanopowder. Uses: Carbon black oil appears as a dark colored liquid with a petroleum-like odor. Less dense than water and insoluble in water. Vapors heavier than air.;Carbon, activated is a black grains that have been treated to improve absorptive ability. May heat spontaneously if not properly cooled after manufacture.;Carbon, animal or vegetable origin appears as a black powder or granular mixed with a tar or starch and water binder pressed into regular lumps or briquettes. Heats slowly and ignites in air especially if wet.;Graphite (natural) appears as a mineral form of the element carbon. Hexagonal crystals or thin leaf-like layers. Steel-gray to black with a metallic luster and a greasy feel. An electrical conductor. Used for high-temperature crucibles, as a lubricant and in "lead" pencils.;DryPowder; DryPowder, Liquid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid, OtherSolid, Liquid; DryPowder, WetSolid, Liquid; Liquid; OtherSolid; OtherSolid, GasVapor, Liquid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid, Liquid; WetSolid; WetSolid, Liquid;OtherSolid; PelletsLargeCrystals;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, WetSolid; Liquid; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;Black, odourless powder;BLACK POWDER OR SOLID IN VARIOUS FORMS. ODOURLESS WHEN PURE.;BLACK FLAKES, LUMPS, POWDER OR CHIPS.;ODOURLESS BLACK PELLETS OR EXTREMELY FINE POWDER.;Black, odorless solid or a dark colored liquid with a petroleum-like odor.;Black grains that have been treated to improve absorptive ability.;Steel gray to black, greasy feeling, odorless solid;Black, odorless solid.;Steel gray to black, greasy feeling, odorless solid.;Steel gray to black, greasy feeling, odorless solid. Group: Graphenes. CAS No. 7782-42-5. IUPAC Name: carbon. Molecular Weight: 12.011g/mol. Molecular Formula: C;C. SMILES: [C]. InChI: InChI=1S/C. InChIKey: OKTJSMMVPCPJKN-UHFFFAOYSA-N. Boiling Point: Very high (USCG, 1999);Sublimes (NIOSH, 2016);4200 ?;Sublimes at 3642 ?; triple point (graphite-liquid-gas), 4492 ? at a p Alfa Chemistry Materials 3
HKUST-1 MOF Material
Where to buy Suppliers range
Alfa Chemistry produces copper benzene-1,3,5-tricarboxylate as part of a comprehensive catalog of 2D materials products. We can guide customers through material characterization and selection. Powder and other forms are available upon request. Request a quote to receive pricing information based on your specifications. Uses: Can be used to adsorb carbon dioxide, carbon monoxide and absorb dibenzothiophene liquid; used for gas adsorption (carbon dioxide, nitrogen, oxygen, hydrogen), catalysis and separation. Group: Porous materials MOF, COF. Alternative Names: CU-BTC MOF, CU(BTC), Cu3(BTC)2, MOF CUBTC, copper trimesate, copper(II) benzene-1, 3, 5-tricarboxylate, copper benzenetricarboxylate. IUPAC Name: tricopper; benzene-1,3,5-tricarboxylate. Molecular Weight: 604.87 g/mol. Molecular Formula: C18H6Cu3O12. SMILES: C1=C(C=C(C=C1C(=O)[O-])C(=O)[O-])C(=O)[O-].C1=C(C=C(C=C1C(=O)[O-])C(=O)[O-])C(=O)[O-].[Cu+2].[Cu+2].[Cu+2]. Flash Point: 99.9995% or higher. Alfa Chemistry Materials 6
HKUST-1 MOF Material
Where to buy Suppliers range
Alfa Chemistry produces copper benzene-1,3,5-tricarboxylate as part of a comprehensive catalog of 2D materials products. We can guide customers through material characterization and selection. Powder and other forms are available upon request. Request a quote to receive pricing information based on your specifications. Uses: Can be used to adsorb carbon dioxide, carbon monoxide and absorb dibenzothiophene liquid; used for gas adsorption (carbon dioxide, nitrogen, oxygen, hydrogen), catalysis and separation. Group: Porous materials MOF, COF. Alternative Names: CU-BTC MOF, CU(BTC), Cu3(BTC)2, MOF CUBTC, copper trimesate, copper(II) benzene-1, 3, 5-tricarboxylate, copper benzenetricarboxylate. IUPAC Name: tricopper; benzene-1,3,5-tricarboxylate. Molecular Weight: 604.87 g/mol. Molecular Formula: C18H6Cu3O12. SMILES: C1=C(C=C(C=C1C(=O)[O-])C(=O)[O-])C(=O)[O-].C1=C(C=C(C=C1C(=O)[O-])C(=O)[O-])C(=O)[O-].[Cu+2].[Cu+2].[Cu+2]. Purity: 99.9995% or higher. Density: 0.35 g/cm3. Alfa Chemistry Materials 7
Magnesium Nitrate
Where to buy Suppliers range
Magnesium Nitrate. Uses: Magnesium nitrate appears as a white crystalline solid. Produces toxic oxides of nitrogen if heated to decomposition. Used in pyrotechnics.;Liquid; PelletsLargeCrystals;HYGROSCOPIC COLOURLESS OR WHITE CRYSTALS. Group: Glass Additives. IUPAC Name: magnesium;dinitrate. Molecular Weight: 148.32g/mol. Molecular Formula: Mg(NO3)2;Mg(NO3)2;MgN2O6. SMILES: [N+](=O)([O-])[O-].[N+](=O)([O-])[O-].[Mg+2]. InChI: InChI=1S/Mg.2NO3/c;2*2-1(3)4/q+2;2*-1. InChIKey: YIXJRHPUWRPCBB-UHFFFAOYSA-N. Boiling Point: Decomposes at 626° F (USCG, 1999). Melting Point: 192 °F (USCG, 1999). Density: 1.46 (USCG, 1999);Approx 2.3. Solubility: Very soluble in water;71.2 g/100g H2O at 25 ?;Solubility in water: very good. Alfa Chemistry Materials 2
Melamine cyanurate
Where to buy Suppliers range
DryPowder; Liquid; OtherSolid; PelletsLargeCrystals. Uses: Resins, Flame Retardant. Group: Nitrogen Flame Retardant. Alternative Names: Melamine cyanurate;Melamine-cyanuric acid compd.; Melamine isocyanurate; 2,4,6-Triamino-s-triazine compd. with s-triazinetriol; s-Triazine, 2,4,6-triamino-, compd. with s-triazine-triol; 1,3,5-Triazine-2,4,6-(1H,3H,5H)-trione, compd. with 1,3,5-triazine-2,4,6-triamine (11). Grades: Technical grade. CAS No. 37640-57-6. Product ID: ACM37640576. Molecular formula: C3H6N6 C3H3N3O3. Mole weight: 255.19. IUPAC Name: 1,3,5-triazinane-2,4,6-trione;1,3,5-triazine-2,4,6-triamine. SMILES: C1(=NC(=NC(=N1)N)N)N. C1(=O)NC(=O)NC(=O)N1. Alfa Chemistry. 4
Melem, (JMA-101)
Where to buy Suppliers range
It is a new product, which is part of the environmental-friendly halogen-free nitrogen-series flame retardant for high-temperature engineering plastics. It has high nitrogen content and good liquidity. It has compatibility and excellent flame retardancy with high polymer materials such as high temperature nylon. Uses: Used in engineering plastics as a flame retardant. The processing temperature can reach 350?. Group: Nitrogen Flame Retardant. Product ID: ACMA00023488. Appearance: White crystal powder. Alfa Chemistry. 4
N1,N1-Bis(2-aminoethyl)ethane-1,2-diamine
Where to buy Suppliers range
N1,N1-Bis(2-aminoethyl)ethane-1,2-diamine. Group: Nitrogen-Donor Ligands. Alternative Names: Tris(2-aminoethyl)amine. Grades: 98%. CAS No. 4097-89-6. Product ID: ACM4097896-2. Molecular formula: C6H18N4. Mole weight: 146.23. IUPAC Name: N',N'-bis(2-aminoethyl)ethane-1,2-diamine. Appearance: Colorless liquid. EC Number: 223-857-4. SMILES: C(CN(CCN)CCN)N. Alfa Chemistry. 4
N1,N1'-(Ethane-1,2-diyl)bis(N1,N2,N2-trimethylethane-1,2-diamine)
Where to buy Suppliers range
N1,N1'-(Ethane-1,2-diyl)bis(N1,N2,N2-trimethylethane-1,2-diamine). Group: Nitrogen-Donor Ligands. Alternative Names: 1,1,4,7,10,10-Hexamethyltriethylenetetramine; 2,5,8,11-Tetramethyl-2,5,8,11-tetraazadodecane. Grades: 97%. CAS No. 3083-10-1. Product ID: ACM3083101-2. Molecular formula: C12H30N4. Mole weight: 230.39. IUPAC Name: N'-[2-[2-(dimethylamino)ethyl-methylamino]ethyl]-N,N,N'-trimethylethane-1,2-diamine. Appearance: Colorless to yellow liquid. EC Number: 221-382-7. SMILES: CN(C)CCN(C)CCN(C)CCN(C)C. Alfa Chemistry. 4
N1,N1'-(Ethane-1,2-diyl)bis(propane-1,3-diamine)
Where to buy Suppliers range
N1,N1'-(Ethane-1,2-diyl)bis(propane-1,3-diamine). Group: Nitrogen-Donor Ligands. Alternative Names: N,N'-Bis(3-aminopropyl)ethylenediamine; 1,5,8,12-Tetraazadodecane. Grades: 98%. CAS No. 10563-26-5. Product ID: ACM10563265-2. Molecular formula: C8H22N4. Mole weight: 174.29. IUPAC Name: N'-[2-(3-aminopropylamino)ethyl]propane-1,3-diamine. Appearance: Liquid. EC Number: 234-147-9. SMILES: C(CN)CNCCNCCCN. Alfa Chemistry. 4
N1,N1,N4,N4-Tetramethylbutane-1,4-diamine
Where to buy Suppliers range
N1,N1,N4,N4-Tetramethylbutane-1,4-diamine. Group: Nitrogen-Donor Ligands. Alternative Names: Tetramethyldiaminobutane; Tetramethylputrescine. Grades: 98%. CAS No. 111-51-3. Product ID: ACM111513-2. Molecular formula: C8H20N2. Mole weight: 144.26. IUPAC Name: N,N,N',N'-tetramethylbutane-1,4-diamine. Appearance: Colorless liquid. EC Number: 203-878-5. SMILES: CN(C)CCCCN(C)C. Alfa Chemistry. 4
N1,N2-Dimethylethane-1,2-diamine
Where to buy Suppliers range
N1,N2-Dimethylethane-1,2-diamine. Group: Nitrogen-Donor Ligands. Alternative Names: N,N'-Dimethylethylenediamine. Grades: 97%. CAS No. 110-70-3. Product ID: ACM110703-1. Molecular formula: C4H12N2. Mole weight: 88.15. IUPAC Name: N,N'-dimethylethane-1,2-diamine. Appearance: Liquid. EC Number: 203-793-3. SMILES: CNCCNC. Alfa Chemistry. 4
Nano Diamond Solution
Where to buy Suppliers range
Nanodiamond is a quantum material with a size of only a few nanometers to hundreds of nanometers and has a diamond structure. In particular, nitrogen vacancy centers (NV centers) are one of the most well-known point defects in nanodiamonds. When an NV center is successfully introduced, it produces coherent photoluminescence that can be easily detected from individual NV centers, especially those in the negatively charged state (NV-). Uses: It has been extensively studied in this field due to their potential applications in biological, electronic and quantum technologies. Group: Other Liquid Products. CAS No. 7782-40-3. Flash Point: 99.9999% (6N). Alfa Chemistry Materials 6
n-Butyl Isocyanate
Where to buy Suppliers range
n-Butyl Isocyanate. Uses: N-butyl isocyanate appears as a clear, colorless liquid with a pungent odor. Very toxic by ingestion, and may also be toxic by skin absorption and inhalation. Vapors heavier than air. Less dense than water and insoluble in water. Produces toxic oxides of nitrogen during combustion.;Liquid;COLOURLESS LIQUID. Group: Polymers. IUPAC Name: 1-isocyanatobutane. Molecular Weight: 99.13g/mol. Molecular Formula: C5H9NO;CH3(CH2)3NCO;C5H9NO. SMILES: CCCCN=C=O. InChI: InChI=1S/C5H9NO/c1-2-3-4-6-5-7/h2-4H2,1H3. InChIKey: HNHVTXYLRVGMHD-UHFFFAOYSA-N. Boiling Point: 115.0 ?;115 ?;115 ?. Melting Point: -75 ?. Flash Point: 66 °F (NFPA, 2010);66 °F (19 ?) (Closed cup);11 ? c.c. Density: 0.880 g/cu cm at 20 ?;0.9 g/cm³;Relative density of the vapour/air-mixture at 20 ? (air = 1): 1.05. Solubility: In water, 1.4X10+3 mg/L at 25 ? (est);SLIGHTLY SOL IN WATER;Solubility in water: reaction. Alfa Chemistry Materials 4
Nickel Nitrate
Where to buy Suppliers range
Nickel Nitrate. Uses: Nickel nitrate is a green crystalline solid. It is soluble in water. It is noncombustible, but it will accelerate the burning of combustible materials. If large quantities are involved in a fire or the combustible material is finely divided, an explosion may result. Prolonged exposure to fire or heat may result in an explosion. Toxic oxides of nitrogen are produced in fires involving this material. It is used in nickel plating and to make nickel catalysts for use in chemical manufacture.;Liquid. Group: Glass Additives. IUPAC Name: nickel(2+);dinitrate. Molecular Weight: 182.7g/mol. Molecular Formula: Ni(NO3)2;N2NiO6. SMILES: [N+](=O)([O-])[O-].[N+](=O)([O-])[O-].[Ni+2]. InChI: InChI=1S/2NO3.Ni/c2*2-1(3)4;/q2*-1;+2. InChIKey: KBJMLQFLOWQJNF-UHFFFAOYSA-N. Density: 2.05 at 68 °F (USCG, 1999). Solubility: 3 G/100 ML HYDRAZINE AT 20 ?;7.5 WT% IN ETHYLENE GLYCOL AT 20 ?;48.5 WT% IN WATER AT 20 ?. Alfa Chemistry Materials 2
Nitrogen and Sulfur Co-Doped Graphyne Oxide
Where to buy Suppliers range
The product is nitrogen-sulfur co-doped graphene oxide solution. Various specifications can be customized. Uses: Energy storage, catalysis, analytical chemistry, mechanics, adsorption, biology, microelectronics, sensors, etc. Group: Other Liquid Products. Flash Point: >99.998%. Alfa Chemistry Materials 6
Nitrogen Dispersion
Where to buy Suppliers range
The colloidal solution material has a Tyndall phenomenon and can be directly used as a monolayer material. Various specifications can be customized. Uses: Energy storage, catalysis, analytical chemistry, mechanics, adsorption, biology, microelectronics, sensors, etc. Group: Other Liquid Products. Flash Point: 99.9999% (6N). Alfa Chemistry Materials 6
Nitrogen-doped Graphene
Where to buy Suppliers range
Nitrogen-doped Graphene. Uses: Carbon black oil appears as a dark colored liquid with a petroleum-like odor. Less dense than water and insoluble in water. Vapors heavier than air.;Carbon, activated is a black grains that have been treated to improve absorptive ability. May heat spontaneously if not properly cooled after manufacture.;Carbon, animal or vegetable origin appears as a black powder or granular mixed with a tar or starch and water binder pressed into regular lumps or briquettes. Heats slowly and ignites in air especially if wet.;Graphite (natural) appears as a mineral form of the element carbon. Hexagonal crystals or thin leaf-like layers. Steel-gray to black with a metallic luster and a greasy feel. An electrical conductor. Used for high-temperature crucibles, as a lubricant and in "lead" pencils.;DryPowder; DryPowder, Liquid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid, OtherSolid, Liquid; DryPowder, WetSolid, Liquid; Liquid; OtherSolid; OtherSolid, GasVapor, Liquid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid, Liquid; WetSolid; WetSolid, Liquid;OtherSolid; PelletsLargeCrystals;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, WetSolid; Liquid; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;Black, odourless powder;BLACK POWDER OR SOLID IN VARIOUS FORMS. ODOURLESS WHEN PURE.;BLACK FLAKES, LUMPS, POWDER OR CHIPS.;ODOURLESS BLACK PELLETS OR EXTREMELY FINE POWDER.;Black, odorless solid or a dark colored liquid with a petroleum-like odor.;Black grains that have been treated to improve absorptive ability.;Steel gray to black, greasy feeling, odorless solid;Black, odorless solid.;Steel gray to black, greasy feeling, odorless solid.;Steel gray to black, greasy feeling, odorless solid. Group: Carbon Nanomaterials. CAS No. 7782-42-5. IUPAC Name: carbon. Molecular Weight: 12.011g/mol. Molecular Formula: C;C. SMILES: [C]. InChI: InChI=1S/C. InChIKey: OKTJSMMVPCPJKN-UHFFFAOYSA-N. Boiling Point: Very high (USCG, 1999);Sublimes (NIOSH, 2016);4200 ?;Sublimes at 3642 ?; triple point (graphite-liquid-gas), 4492 ? at a pressure Alfa Chemistry Materials 3
Nitrogen-Doped Graphene Aerogel
Where to buy Suppliers range
Black Cylindrical. Uses: Carbon black oil appears as a dark colored liquid with a petroleum-like odor. Less dense than water and insoluble in water. Vapors heavier than air.;Carbon, activated is a black grains that have been treated to improve absorptive ability. May heat spontaneously if not properly cooled after manufacture.;Carbon, animal or vegetable origin appears as a black powder or granular mixed with a tar or starch and water binder pressed into regular lumps or briquettes. Heats slowly and ignites in air especially if wet.;Graphite (natural) appears as a mineral form of the element carbon. Hexagonal crystals or thin leaf-like layers. Steel-gray to black with a metallic luster and a greasy feel. An electrical conductor. Used for high-temperature crucibles, as a lubricant and in "lead" pencils.;DryPowder; DryPowder, Liquid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid, OtherSolid, Liquid; DryPowder, WetSolid, Liquid; Liquid; OtherSolid; OtherSolid, GasVapor, Liquid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid, Liquid; WetSolid; WetSolid, Liquid;OtherSolid; PelletsLargeCrystals;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, WetSolid; Liquid; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;Black, odourless powder;BLACK POWDER OR SOLID IN VARIOUS FORMS. ODOURLESS WHEN PURE.;BLACK FLAKES, LUMPS, POWDER OR CHIPS.;ODOURLESS BLACK PELLETS OR EXTREMELY FINE POWDER.;Black, odorless solid or a dark colored liquid with a petroleum-like odor.;Black grains that have been treated to improve absorptive ability.;Steel gray to black, greasy feeling, odorless solid;Black, odorless solid.;Steel gray to black, greasy feeling, odorless solid.;Steel gray to black, greasy feeling, odorless solid. Group: Graphenes. CAS No. 7782-42-5. IUPAC Name: carbon. Molecular Weight: 12.011g/mol. Molecular Formula: C;C. SMILES: [C]. InChI: InChI=1S/C. InChIKey: OKTJSMMVPCPJKN-UHFFFAOYSA-N. Boiling Point: Very high (USCG, 1999);Sublimes (NIOSH, 2016);4200 ?;Sublimes at 3642 ?; triple point (graphite-liquid-gas), 4492 ? at a pressure of 101.325 kPa;> Alfa Chemistry Materials 3
Nitrogen doped graphene oxide
Where to buy Suppliers range
Nitrogen doped graphene oxide. Uses: Carbon black oil appears as a dark colored liquid with a petroleum-like odor. Less dense than water and insoluble in water. Vapors heavier than air.;Carbon, activated is a black grains that have been treated to improve absorptive ability. May heat spontaneously if not properly cooled after manufacture.;Carbon, animal or vegetable origin appears as a black powder or granular mixed with a tar or starch and water binder pressed into regular lumps or briquettes. Heats slowly and ignites in air especially if wet.;Graphite (natural) appears as a mineral form of the element carbon. Hexagonal crystals or thin leaf-like layers. Steel-gray to black with a metallic luster and a greasy feel. An electrical conductor. Used for high-temperature crucibles, as a lubricant and in "lead" pencils.;DryPowder; DryPowder, Liquid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid, OtherSolid, Liquid; DryPowder, WetSolid, Liquid; Liquid; OtherSolid; OtherSolid, GasVapor, Liquid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid, Liquid; WetSolid; WetSolid, Liquid;OtherSolid; PelletsLargeCrystals;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, WetSolid; Liquid; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;Black, odourless powder;BLACK POWDER OR SOLID IN VARIOUS FORMS. ODOURLESS WHEN PURE.;BLACK FLAKES, LUMPS, POWDER OR CHIPS.;ODOURLESS BLACK PELLETS OR EXTREMELY FINE POWDER.;Black, odorless solid or a dark colored liquid with a petroleum-like odor.;Black grains that have been treated to improve absorptive ability.;Steel gray to black, greasy feeling, odorless solid;Black, odorless solid.;Steel gray to black, greasy feeling, odorless solid.;Steel gray to black, greasy feeling, odorless solid. Group: Carbon Compounds. CAS No. 7782-42-5. IUPAC Name: carbon. Molecular Weight: 12.011g/mol. Molecular Formula: C;C. SMILES: [C]. InChI: InChI=1S/C. InChIKey: OKTJSMMVPCPJKN-UHFFFAOYSA-N. Boiling Point: Very high (USCG, 1999);Sublimes (NIOSH, 2016);4200 ?;Sublimes at 3642 ?; triple point (graphite-liquid-gas), 4492 ? at a pressu Alfa Chemistry Materials 2
Nitrogen-doped Graphene Oxide
Where to buy Suppliers range
Nitrogen-doped Graphene Oxide. Product ID: ACMA00018466. Mole weight: 14.5. Appearance: Black to brown powder or gray liquid. Alfa Chemistry. 5
Nitrogen-doped Graphene Powder
Where to buy Suppliers range
Nitrogen-doped Graphene Powder. Uses: Carbon black oil appears as a dark colored liquid with a petroleum-like odor. Less dense than water and insoluble in water. Vapors heavier than air.;Carbon, activated is a black grains that have been treated to improve absorptive ability. May heat spontaneously if not properly cooled after manufacture.;Carbon, animal or vegetable origin appears as a black powder or granular mixed with a tar or starch and water binder pressed into regular lumps or briquettes. Heats slowly and ignites in air especially if wet.;Graphite (natural) appears as a mineral form of the element carbon. Hexagonal crystals or thin leaf-like layers. Steel-gray to black with a metallic luster and a greasy feel. An electrical conductor. Used for high-temperature crucibles, as a lubricant and in "lead" pencils.;DryPowder; DryPowder, Liquid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid, OtherSolid, Liquid; DryPowder, WetSolid, Liquid; Liquid; OtherSolid; OtherSolid, GasVapor, Liquid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid, Liquid; WetSolid; WetSolid, Liquid;OtherSolid; PelletsLargeCrystals;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, WetSolid; Liquid; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;Black, odourless powder;BLACK POWDER OR SOLID IN VARIOUS FORMS. ODOURLESS WHEN PURE.;BLACK FLAKES, LUMPS, POWDER OR CHIPS.;ODOURLESS BLACK PELLETS OR EXTREMELY FINE POWDER.;Black, odorless solid or a dark colored liquid with a petroleum-like odor.;Black grains that have been treated to improve absorptive ability.;Steel gray to black, greasy feeling, odorless solid;Black, odorless solid.;Steel gray to black, greasy feeling, odorless solid.;Steel gray to black, greasy feeling, odorless solid. Group: Graphenes. CAS No. 7782-42-5. IUPAC Name: carbon. Molecular Weight: 12.011g/mol. Molecular Formula: C;C. SMILES: [C]. InChI: InChI=1S/C. InChIKey: OKTJSMMVPCPJKN-UHFFFAOYSA-N. Boiling Point: Very high (USCG, 1999);Sublimes (NIOSH, 2016);4200 ?;Sublimes at 3642 ?; triple point (graphite-liquid-gas), 4492 ? at a pressure of Alfa Chemistry Materials 3
Nitrogen-doped Graphene Powder
Where to buy Suppliers range
Carbon black oil appears as a dark colored liquid with a petroleum-like odor. Less dense than water and insoluble in water. Vapors heavier than air.;Carbon, activated is a black grains that have been treated to improve absorptive ability. May heat spontaneously if not properly cooled after manufacture.;Carbon, animal or vegetable origin appears as a black powder or granular mixed with a tar or starch and water binder pressed into regular lumps or briquettes. Heats slowly and ignites in air especially if wet.;Graphite (natural) appears as a mineral form of the element carbon. Hexagonal crystals or thin leaf-like layers. Steel-gray to black with a metallic luster and a greasy feel. An electrical conductor. Used for high-temperature crucibles, as a lubricant and in "lead" pencils.;DryPowder; DryPowder, Liquid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid, OtherSolid, Liquid; DryPowder, WetSolid, Liquid; Liquid; OtherSolid; OtherSolid, GasVapor, Liquid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid, Liquid; WetSolid; WetSolid, Liquid;OtherSolid; PelletsLargeCrystals;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, WetSolid; Liquid; OtherSolid; PelletsLargeCrystals; PelletsLargeCrystals, OtherSolid; WetSolid;Black, odourless powder;BLACK POWDER OR SOLID IN VARIOUS FORMS. ODOURLESS WHEN PURE.;BLACK FLAKES, LUMPS, POWDER OR CHIPS.;ODOURLESS BLACK PELLETS OR EXTREMELY FINE POWDER.;Black, odorless solid or a dark colored liquid with a petroleum-like odor.;Black grains that have been treated to improve absorptive ability.;Steel gray to black, greasy feeling, odorless solid;Black, odorless solid.;Steel gray to black, greasy feeling, odorless solid.;Steel gray to black, greasy feeling, odorless solid. Group: Other Nanomaterials. CAS No. 7782-42-5. IUPAC Name: carbon. Molecular Weight: C;C. Molecular Formula: 12.011g/mol. SMILES: [C]. Density: 2 at 68 °F (USCG, 1999);2.0 to 2.25 (NIOSH, 2016);1.8-2.1;0.08 to 0.5;Relative density (water = 1): 1.8-3.51;Relative density (water = 1): 2.09-2.23;Relative density (water = 1): 1.8-2.1;2.0-2.25;1.8-2.1;2.0-2.25;1.5-1.8. Alfa Chemistry Materials 7
Nitrogen trichloride
Where to buy Suppliers range
Yellow oily liquid. Group: Heterocyclic Organic Compound. Alternative Names: Trichlorine nitride;Nitrogen chloride;nitrogen trichloride; TRICHLORAMINE; Trichloramine: (Nitrogen chloride). Grades: 96%. CAS No. 10025-85-1. Molecular formula: Cl3N. Mole weight: 120.37. IUPAC Name: nitrogen trichloride. Exact Mass: 118.91000. EC Number: 233-045-1. Boiling Point: 70ºC at 760 mmHg. Melting Point: -40ºC (233 K). Flash Point: 134-136°C. Density: 1.72 g/cm3. SMILES: N(Cl)(Cl)Cl. InChIKey: QEHKBHWEUPXBCW-UHFFFAOYSA-N. Safty Description: S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36:Wear suitable protective clothing. S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible). S36/37/. Hazard statements: Xi, C. Alfa Chemistry.
N,N-Dimethylaminoethyl Methacrylate
Where to buy Suppliers range
N,N-Dimethylaminoethyl Methacrylate. Uses: 2-dimethylaminoethyl methacrylate appears as a clear colorless liquid. Less dense than water and insoluble in water. Vapors heavier than air and corrosive to eyes and mucous membranes. May polymerize exothermically if heated or contaminated. If polymerization takes place inside a closed container, the container may rupture violently. Produces toxic oxides of nitrogen during combustion. Toxic by skin absorption, ingestion and inhalation. Used to make plastics and in textiles.;Liquid;COLOURLESS-TO-LIGHT-YELLOW LIQUID. Group: Polymers. IUPAC Name: 2-(dimethylamino)ethyl 2-methylprop-2-enoate. Molecular Weight: 157.21g/mol. Molecular Formula: C8H15NO2;C8H15NO2. SMILES: CC(=C)C(=O)OCCN(C)C. InChI: InChI=1S/C8H15NO2/c1-7(2)8(10)11-6-5-9(3)4/h1,5-6H2,2-4H3. InChIKey: JKNCOURZONDCGV-UHFFFAOYSA-N. Boiling Point: 186.0 ?;186 ?;186 ?. Melting Point: -30.0 ?;-30 ? (freezing point);-30 ?. Flash Point: 165 °F (NFPA, 2010);64 ? (147 °F) - closed cup;165 °F (74 ?) (open cup);68 ? c.c. Density: Specific gravity: 0.933 at 25 ?;Relative density (water = 1): 0.93. Solubility: In water, 1000 g/L at 20 ? (study performed without adjustment of pH value);Solubility in water, g/100ml at 25 ?: 10.6. Viscosity: 1.34 mPa s at 25 ?. Alfa Chemistry Materials 4
Polyacrylamide, nonionic, average Mw 12000,000
Where to buy Suppliers range
Polyacrylamide, nonionic, average Mw 12000,000. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 9003-5-8. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility Alfa Chemistry Materials 4
Polyacrylamide, nonionic, average Mw 14000,000
Where to buy Suppliers range
Polyacrylamide, nonionic, average Mw 14000,000. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 9003-5-8. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility Alfa Chemistry Materials 4
Polyacrylamide, nonionic, average Mw 5000,000
Where to buy Suppliers range
Polyacrylamide, nonionic, average Mw 5000,000. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 9003-5-8. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility i Alfa Chemistry Materials 4
Polyacrylamide, nonionic, average Mw 7000,000
Where to buy Suppliers range
Polyacrylamide, nonionic, average Mw 7000,000. Uses: Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid. Group: Polymers. CAS No. 9003-5-8. IUPAC Name: prop-2-enamide. Molecular Weight: 71.08g/mol. Molecular Formula: C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO. SMILES: C=CC(=O)N. InChI: InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5). InChIKey: HRPVXLWXLXDGHG-UHFFFAOYSA-N. Boiling Point: 189 °F at 2 mm Hg (EPA, 1998);192.6 ?;192.6 ?;347-572°F (decomposes);347-572°F (Decomposes). Melting Point: 184 °F (EPA, 1998);84.5 ?;84.5 ?;84.5?;84.5 ?;184°F;184°F. Flash Point: 280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 ? (280 °F) - closed cup;138 ? c.c.;280°F;280°F. Density: 1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 ?/4 ?;1.13 g/cm³;1.12;1.12. Solubility: greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 ?; 4.048X10+2 g/L at 30 ?;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 ? in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 ?;Solubility i Alfa Chemistry Materials 4
Polyacrylonitrile, average Mw 150,000
Where to buy Suppliers range
Polyacrylonitrile, average Mw 150,000. Uses: Acrylonitrile, stabilized appears as a clear colorless liquid with a strong pungent odor. Flash point 32°F. Prolonged exposure to the vapors or skin contact harmful. Density 6.7 lb / gal. Vapors heavier than air. Combustion produces toxic oxides of nitrogen. Requires storage and handling in closed systems. Used in insecticides and to make plastics, fibers and other chemicals. Rate of onset: Immediate Persistence: Minutes to hours Odor threshold: 17 ppm Source/use/other hazard: Plastics, coatings, adhesives industries; dyes; pharmaceuticals; flam gas.;Liquid;COLOURLESS OR PALE YELLOW LIQUID WITH PUNGENT ODOUR.;Colorless to pale-yellow liquid with an unpleasant odor.;Colorless to pale-yellow liquid with an unpleasant odor. [Note: Odor can only be detected above the PEL.]. Group: Polymers. CAS No. 25014-41-9. IUPAC Name: prop-2-enenitrile. Molecular Weight: 53.06g/mol. Molecular Formula: C3H3N;CH2=CH-CN;H2C(CH)CN;C3H3N. SMILES: C=CC#N. InChI: InChI=1S/C3H3N/c1-2-3-4/h2H,1H2. InChIKey: NLHHRLWOUZZQLW-UHFFFAOYSA-N. Boiling Point: 171 °F at 760 mm Hg (EPA, 1998);77.3 ?;77.2 ?;77 ?;171°F;171°F. Melting Point: -116 °F (EPA, 1998);-83.5 ?;-83.51 ?;-84 ?;-116°F;-116°F. Flash Point: 32 °F (EPA, 1998);-5 ? (23 °F) - closed cup;32 °F(0 ?)(open cup);-1 ? c.c.;30°F;30°F. Density: 0.8004 at 77 °F (EPA, 1998);0.8007 at 25 ?;1.14-1.17;Relative density (water = 1): 0.8;0.81;0.81. Solubility: 10 to 50 mg/mL at 70.9° F (NTP, 1992);1.40 M;In water, 7.45X10+4 mg/L at 25 ?;Very soluble in ethanol, acetone, benzene, ether;Acrylonitrile is. miscible with ethanol, carbon tetrachloride, ethyl acetate, ethylene cyanohydrin, liquid carbon dioxide. toluene, petroleum ether, and xylene.;SOL IN DIMETHYLSULFOXIDE, DIMETHYLACETAMIDE, DIMETHYLFORMAMIDE;SOL IN MALEIC ANHYDRIDE, NITRILES, NITROPHENOLS, ETHYLENE CARBONATE, HOT BUTYROLACTONE; INSOL IN ALC, ACETONE, BENZENE, CARBON TETRACHLORIDE, PETROLEUM ETHER;Solubility in water, g/100ml at 20 ?: 7;7%. Viscosity: 0.34 sq mm/s at 25 ?. Alfa Chemistry Materials 4
Polyacrylonitrile, average Mw 85,000
Where to buy Suppliers range
Polyacrylonitrile, average Mw 85,000. Uses: Acrylonitrile, stabilized appears as a clear colorless liquid with a strong pungent odor. Flash point 32°F. Prolonged exposure to the vapors or skin contact harmful. Density 6.7 lb / gal. Vapors heavier than air. Combustion produces toxic oxides of nitrogen. Requires storage and handling in closed systems. Used in insecticides and to make plastics, fibers and other chemicals. Rate of onset: Immediate Persistence: Minutes to hours Odor threshold: 17 ppm Source/use/other hazard: Plastics, coatings, adhesives industries; dyes; pharmaceuticals; flam gas.;Liquid;COLOURLESS OR PALE YELLOW LIQUID WITH PUNGENT ODOUR.;Colorless to pale-yellow liquid with an unpleasant odor.;Colorless to pale-yellow liquid with an unpleasant odor. [Note: Odor can only be detected above the PEL.]. Group: Polymers. CAS No. 25014-41-9. IUPAC Name: prop-2-enenitrile. Molecular Weight: 53.06g/mol. Molecular Formula: C3H3N;CH2=CH-CN;H2C(CH)CN;C3H3N. SMILES: C=CC#N. InChI: InChI=1S/C3H3N/c1-2-3-4/h2H,1H2. InChIKey: NLHHRLWOUZZQLW-UHFFFAOYSA-N. Boiling Point: 171 °F at 760 mm Hg (EPA, 1998);77.3 ?;77.2 ?;77 ?;171°F;171°F. Melting Point: -116 °F (EPA, 1998);-83.5 ?;-83.51 ?;-84 ?;-116°F;-116°F. Flash Point: 32 °F (EPA, 1998);-5 ? (23 °F) - closed cup;32 °F(0 ?)(open cup);-1 ? c.c.;30°F;30°F. Density: 0.8004 at 77 °F (EPA, 1998);0.8007 at 25 ?;1.14-1.17;Relative density (water = 1): 0.8;0.81;0.81. Solubility: 10 to 50 mg/mL at 70.9° F (NTP, 1992);1.40 M;In water, 7.45X10+4 mg/L at 25 ?;Very soluble in ethanol, acetone, benzene, ether;Acrylonitrile is. miscible with ethanol, carbon tetrachloride, ethyl acetate, ethylene cyanohydrin, liquid carbon dioxide. toluene, petroleum ether, and xylene.;SOL IN DIMETHYLSULFOXIDE, DIMETHYLACETAMIDE, DIMETHYLFORMAMIDE;SOL IN MALEIC ANHYDRIDE, NITRILES, NITROPHENOLS, ETHYLENE CARBONATE, HOT BUTYROLACTONE; INSOL IN ALC, ACETONE, BENZENE, CARBON TETRACHLORIDE, PETROLEUM ETHER;Solubility in water, g/100ml at 20 ?: 7;7%. Viscosity: 0.34 sq mm/s at 25 ?. Alfa Chemistry Materials 4
Potassium Nitrate
Where to buy Suppliers range
Potassium Nitrate. Uses: Potassium nitrate appears as a white to dirty gray crystalline solid. Water soluble. Noncombustible, but accelerates the burning of combustible materials. If large quantities are involved in fire or the combustible material is finely divided an explosion may result. May explode under prolonged exposure to heat or fire. Toxic oxides of nitrogen are produced in fires. Used in solid propellants, explosives, fertilizers.;DryPowder; DryPowder, PelletsLargeCrystals; Liquid; OtherSolid; PelletsLargeCrystals;White crystalline powder or transparent prisms having a cooling, saline, pungent taste;COLOURLESS-TO-WHITE CRYSTALLINE POWDER. Group: Glass Additives. IUPAC Name: potassium;nitrate. Molecular Weight: 101.103g/mol. Molecular Formula: KNO3;KNO3;KNO3;KNO3. SMILES: [N+](=O)([O-])[O-].[K+]. InChI: InChI=1S/K.NO3/c;2-1(3)4/q+1;-1. InChIKey: FGIUAXJPYTZDNR-UHFFFAOYSA-N. Boiling Point: 752 °F at 760 mm Hg (decomposes) (USCG, 1999);400 ? (decomp). Melting Point: 633.2 °F (USCG, 1999);Mp 334 °;337 ?;333-334 ?. Density: 2.109 (USCG, 1999);2.1 at 25 ?;2.1 g/cm³. Solubility: 35g/100ml;Sol in water, glycerol; slightly sol in alcohol;Insoluble in ethanol;1 g/2.8 mL water at about 25 ?; 1 g/0.5 mL boiling water; 1 g/620 mL alcohol;38.3 g/100 g water at 25 ?;247 g/100 cc water at 100 ?;Insol in absolute alcohol;0.34 wt% in methanol at 25 ?;Solubility in water, g/100ml at 25 ?: 35.7. Alfa Chemistry Materials 2
Soy Trimethouysilylpropyldimonium Chloride
Where to buy Suppliers range
Soy Trimethouysilylpropyldimonium Chloride (STMS) is a chemical compound derived from soybeans. It is commonly used in hair care products such as shampoos, conditioners, and hair treatments. STMS is a quaternary ammonium compound, meaning it has a positively charged nitrogen atom that helps it to bond to hair or skin. It is often used in hair care products because it can help to detangle hair and make it feel smoother and more manageable. In addition to its conditioning properties, STMS can also help to reduce static electricity in hair, which can make it easier to style. It is also a mild antistatic agent, and can help to reduce frizzy and flyaway hair. Uses: 1. Soy trimethouysilylpropyldimonium chloride is used in hair care products, such as shampoos and conditioners, as a conditioning agent for hair. 2. It is also used in skin care products as a moisturizer and emollient. 3. Soy trimethouysilylpropyldimonium chloride is a quaternary ammonium compound that is derived from soy protein, making it a natural and sustainable ingredient. 4. It helps to make the hair soft, shiny, and tangle-free by smoothing the hair cuticles. 5. It has antistatic properties that help to reduce frizz and flyaways in hair. 6. Soy trimethouysilylpropyldimonium chloride is often used in combination with other conditioning agents to enhance its effectiveness. 7. It is also used in some household cleaning products, such as fabric softeners and laundry detergents, for its conditioning and antistatic properties. Group: Cationic Surfactants & Conditioning Agents. Product ID: ACMA00020980. Appearance: clear, colorless to slightly yellowish liquid. Alfa Chemistry. 4
Tissue, Array, Canine, Female, Adult, Normal, Multi-Tissue I (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Adrenal, Bone Marrow, Brain-Cerebellum, Brain-Cerebrum, Breast, Colon, Esophagus, Heart, Kidney, Liver, Lung, Mesothileal (Pericardium), Nerve, Ovary, Pancreas, Pituitary, Rectum, Salivary Gland, Skeletal Muscle, Skin, Small Intestine, Spleen, Stomach, Thymus, Thyroid, Tonsil, Uterus, Uterus-Cervix. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Canine, Male, Adult, Normal, Multi-Tissue I (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Adrenal, Bone Marrow, Brain-Cerebellum, Brain-Cerebrum, Colon, Esophagus, Heart, Kidney, Liver, Lung, Mesothileal (Pericardium), Nerve, Pancreas, Prostate, Rectum, Skeletal Muscle, Skin, Small Intestine, Spleen, Stomach, Testis, Thymus, Thyroid, Tonsil. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Human Adult Normal, Multi-Tissue I (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Adrenal, Brain-Cerebellum, Brain-Cerebrum, Breast, Cervix, Heart, Kidney, Liver, Lung, Ovary, Pancreas, Placenta, Salivary Gland, Skeletal Muscle, Skin, Small Intestine, Spleen, Stomach, Thyroid, Uterus. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Human Tumor (Adult), Breast (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Invasive Ductal Carcinoma, Invasive Lobular Carcinoma. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Human Tumor (Adult), Lung (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Adenocarcinoma, Adenocarcinoma-Papillary, Bronchio Alveolar Carcinoma, Carcinoma-Sarcoma, Carcinoma-Sarcoma Todes, Harmatoma, Squamous Cell Carcinoma, Undifferentiated Small Cell Carcinoma. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Human Tumor (Adult), Prostate (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Adenocarcinoma. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Human Tumor and Normal, Multi-Tissue I (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Brain, Brain Tumor, Breast, Breast Tumor, Colon, Colon Tumor, Kidney, Kidney Tumor, Liver, Liver Tumor, Lung, Lung Tumor, Ovary, Ovary Tumor, Pancreas, Pancreas Tumor, Prostate, Prostate Tumor, Skeletal Muscle, Skeletal Muscle Tumor, Skin, Skin Tumor, Small Intestine, Small Intestine Tumor, Stomach, Stomach Tumor, Uterus, Uterus Tumor. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Multi-Species, Brain (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Bovine, Canine, Chicken, Cynomolgus Monkey, Equine, Goat, Guinea Pig, Hamster, Human, Mouse, Porcine, Rabbit, Rat, Rhesus Monkey, Sheep. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Multi-Species, Liver (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Bovine, Canine, Chicken, Cynomolgus Monkey, Equine, Goat, Guinea Pig, Hamster, Human, Mouse, Porcine, Rabbit, Rat, Rhesus Monkey, Sheep. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Rabbit, Female, Adult, Normal, Multi-Tissue I (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Adrenal, Bone Marrow, Brain-Cerebellum, Brain-Cerebrum, Breast, Colon, Esophagus, Heart, Kidney, Liver, Lung, Mesothileal (Pericardium), Nerve, Ovary, Pancreas, Pituitary, Rectum, Salivary Gland, Skeletal Muscle, Skin, Small Intestine, Spleen, Stomach, Thymus, Tonsil, Uterus, Uterus-Cervix. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide
Tissue, Array, Rabbit, Male, Adult, Normal, Multi-Tissue I (Frozen) HisTek™
Where to buy Suppliers range
Tissues are snap frozen in liquid nitrogen immediately after excision, and embedded in OCT. All US Biological’s frozen tissue products, including frozen tissue arrays, frozen tissue sections, and frozen tissue panels, can be used for both immunohistochemistry and in situ hybridization. These products are ideal for rapid cellular localization of RNA and protein expression, especially for antibodies that don't recognize paraffin embedded tissue. At least one of the tissue slides from each lot was stained with H & E to ensure quality. Group: Biologicals. Alternative Names: Adrenal, Bone Marrow, Brain-Cerebellum, Brain-Cerebrum, Colon, Esophagus, Heart, Kidney, Liver, Lung, Lymphoid Tissue, Mesothileal (Pericardium), Nerve, Pancreas, Prostate, Rectum, Salivary Gland, Skeletal Muscle, Skin, Small Intestine, Spleen, Stomach, Testis, Thymus, Tonsil. Grades: Molecular Biology Grade. Pack Sizes: 1 Slide, 5 Slides. US Biological Life Sciences. USBiological 1
Worldwide