CD Bioparticles - Products
CD Bioparticles specializes in manufacturing and supplying nanoparticles, microparticles, and coatings for diagnostics and research, alongside developing customized, biocompatible drug delivery systems.
| Product | Description | |
|---|---|---|
| DiagPoly Plain Polystyrene Particles, 2.0-2.4 μm | Plain PS Particles, 2.0-2.4 μm, 5.0% w/v, dispersed in DI water, analytical standard. Uses: Cell sorting, immunoprecipitation, biosensing, in vivo and in vitro sensor, coating materials for contrast agents and anti-cancer drugs. Pack Sizes: 10 mL, 100 mL. Product ID: DNM-P008. |  |
| DiagPoly Plain Polystyrene Particles, 20 μm | Plain PS Particles, 20 μm, 10 mg/mL, supplied in DI water. Uses: Used as standards or markers, in immunoassays (such as latex agglutination assays and solid phase enzyme immunoassays), or coated with proteins for use in research and diagnostic tests. Pack Sizes: 5 mL. Product ID: DMP-L052. | |
| DiagPoly Plain Polystyrene Particles, 250 μm | Plain PS Particles, 250 μm, solid particles. Uses: Used as standards or markers, in immunoassays (such as latex agglutination assays and solid phase enzyme immunoassays), or coated with proteins for use in research and diagnostic tests. Pack Sizes: 0.5 g. Product ID: DMP-L085. | |
| DiagPoly Plain Polystyrene Particles, 300 μm | Plain PS Particles, 300 μm, solid particles. Uses: Used as standards or markers, in immunoassays (such as latex agglutination assays and solid phase enzyme immunoassays), or coated with proteins for use in research and diagnostic tests. Pack Sizes: 0.5 g. Product ID: DMP-L091. | |
| DiagPoly Plain Polystyrene Particles, 5.0-5.9 μm | Plain PS Particles, 5.0-5.9 μm, 5.0% w/v, dispersed in DI water, analytical standard. Uses: Cell sorting, immunoprecipitation, biosensing, in vivo and in vitro sensor, coating materials for contrast agents and anti-cancer drugs. Pack Sizes: 10 mL, 100 mL. Product ID: DNM-P014. | |
| DiagPoly Plain Polystyrene Particles, 650 μm | Plain PS Particles, 650 μm, solid particles. Uses: Used as standards or markers, in immunoassays (such as latex agglutination assays and solid phase enzyme immunoassays), or coated with proteins for use in research and diagnostic tests. Pack Sizes: 0.5 g. Product ID: DMP-L115. | |
| DiagPoly Plain Polystyrene Particles, Crosslinked, 400.0-600.0 μm | DVB crosslinked polystyrene particles with plain surface, 400.0-600.0 μm, 5.0% w/v, dispersed in DI water, analytical standard. Pack Sizes: 10 mL. Product ID: DNM-P029CR. | |
| DiagPoly Poly(ε-caprolactone) PCL Microspheres, 300 μm | Poly(ε-caprolactone) PCL Microspheres, 300 μm, Density 1.155 g/mL, Dry Powder. Uses: Coating materials for drugs, drug carriers, drug delivery. Pack Sizes: 50 mg. Product ID: DNR-P020. | |
| DiagPoly Polyethylene Particles, 50-100 nm | DiagPoly Polyethylene Particles, 50-100 nm, PDI < 0.2, supplied 1 mL at 1% solid in aqueous media (0.1% Tween 20 in DI waterwith 2mM NaN3). Pack Sizes: 1 mL. Product ID: DFC-L019B-PE-50. | |
| DiagPoly Polypropylene Particles, 50-100 nm | DiagPoly Polypropylene Particles, 50-100 nm, PDI < 0.2, supplied 1 mL at 1% solid in aqueous media (0.1% Tween 20 in DI waterwith 2mM NaN3). Pack Sizes: 1 mL. Product ID: DFC-L020B-PP-50. | |
| DiagPoly Polystyrene Particles, NIST Standard, 40 μm | NIST traceable size standards polystyrene particles, these particles are measured on in-house instruments calibrated with NIST standard reference materials. 40 μm, supplied in DI water. Uses: Suitable for use in the performance of routine instrument calibration checks and corrections. Pack Sizes: 15 mL. Product ID: DNT-B40. | |
| DiagPoly Polyvinyl Chloride Particles, 250 nm | DiagPoly Polyvinyl Chloride Particles, 250 nm, PDI < 0.2, supplied 1 mL at 1% solid in aqueous media (0.1% Tween 20 in DI waterwith 2mM NaN3). Pack Sizes: 1 mL. Product ID: DFC-L018B-PVC-250. | |
| DiagPoly Protein A Polystyrene Nanoparticles, 100 nm | 100 nm PS nanoparticles are designed with protein A on the surface to selectively pick up and orient IgGs from a mixture of species. These particles are supplied in PBS buffer (pH=7.4) with 0.02 % sodium azide. Polydispersity index < 0.2. Uses: Designed to selectively pick up and orient iggs from a mixture of species. Pack Sizes: 1 mL. Product ID: DNG-P083. | |
| DiagPoly Red Colored, Carboxyl Polystyrene Particles, 0.4 μm | DiagPoly Red Colored, Carboxyl Polystyrene Particles, 0.4 μm (# DDCR-E006) are carboxylated polystyrene particles with red dyes encapsulated for colour visualization. The dyed particles are available to support covalent immobilization of biomolecules with carboxyl-functionalized surfaces and used in lateral chromatographic experiments and latex agglutination tests. The density of Colored liquid suspension is 1.05 g/mL. Refractive Index: 1.59@589nm (25°C). Uses: Lateral chromatographic experiments, latex agglutination tests, rapid (lateral flow) tests and applications when colour visualization is important for detection. Pack Sizes: 5 mL. Product ID: DDCR-E006. | |
| DiagPoly Red Colored, Carboxyl Polystyrene Particles, 3 μm | DiagPoly Red Colored, Carboxyl Polystyrene Particles, 3 μm (# DDCR-E011) are carboxylated polystyrene particles with red dyes encapsulated for colour visualization. The dyed particles are available to support covalent immobilization of biomolecules with carboxyl-functionalized surfaces and used in lateral chromatographic experiments and latex agglutination tests. The density of Colored liquid suspension is 1.05 g/mL. Refractive Index: 1.59@589nm (25°C). Uses: Lateral chromatographic experiments, latex agglutination tests, rapid (lateral flow) tests and applications when colour visualization is important for detection. Pack Sizes: 5 mL. Product ID: DDCR-E011. | |
| DiagPoly Red Colored, Carboxyl Polystyrene Particles, 8 μm | DiagPoly Red Colored, Carboxyl Polystyrene Particles, 8 μm (# DDCR-E016) are carboxylated polystyrene particles with red dyes encapsulated for colour visualization. The dyed particles are available to support covalent immobilization of biomolecules with carboxyl-functionalized surfaces and used in lateral chromatographic experiments and latex agglutination tests. The density of Colored liquid suspension is 1.05 g/mL. Refractive Index: 1.59@589nm (25°C). Uses: Lateral chromatographic experiments, latex agglutination tests, rapid (lateral flow) tests and applications when colour visualization is important for detection. Pack Sizes: 5 mL. Product ID: DDCR-E016. | |
| DiagPoly Red Colored Polystyrene Particles, 3 μm | DiagPoly Red Colored Polystyrene Particles, 3 μm (# DDR-L010) are red dyed polystyrene particles for visual or microscopic identification. Non-functionalized surfaces are suitable to support adsorption of antibody or other large proteins. The density of suspension is 1.05-1.06 g/mL. Sonicate/Vortex the microspheres before each use. Uses: Lateral flow tests, latex agglutination tests. Pack Sizes: 5 mL, 10 mL, 15 mL, 50 mL. Product ID: DDR-L010. | |
| DiagPoly Streptavidin Coated Polystyrene Particles, 6.0-8.0 μm | Streptavidin Coated PS Particles, 6.0-8.0 μm, 0.5% w/v, dispersed in DI water, analytical standard. Uses: Cell sorting, immunoprecipitation, biosensing, in vivo and in vitro sensor, coating materials for contrast agents and anti-cancer drugs. Pack Sizes: 5 mL. Product ID: DNM-C012. | |
| DiagPoly Streptavidin Polystyrene Nanoparticles, 100 nm | 100 nm PS nanoparticles are designed with streptavidin on the surface to bind biotinylated molecules easily and with a high affinity. These particles are supplied in PBS buffer (pH=7.4) with 0.02 % sodium azide. Polydispersity index < 0.2. Uses: Suitable for binding biotinylated molecules easily and with a high affinity. Pack Sizes: 1 mL. Product ID: DNG-P076. | |
| DiagPoly Streptavidin Polystyrene Particles, 100 μm | 100 μm PS particles are designed with streptavidin on the surface to bind biotinylated molecules easily and with a high affinity. These particles aresupplied in PBS buffer (pH=7.4) with 0.02 % sodium azide. Standard deviation < 10 % (C.V.). Uses: Suitable for binding biotinylated molecules easily and with a high affinity. Pack Sizes: 1 mL. Product ID: DNG-P082. | |
| DiagPoly Ultra Multiple Fluorescent Polystyrene Particles, Flow Cytometry Grade, 3.0-3.4 μm | DiagPoly Ultra Multiple Fluorescent Polystyrene Particles, Flow Cytometry Grade, 3.0-3.4 μm (# DNS-SPR19U) contains a single population of polystyrene particles with an enhanced UV and Far Red fluorescence intensity. Every particle contains a mixture of fluorophores that enable the particles to be excited at any wavelength from 365 nm to 650 nm. Using these particles, the coefficients of variation (CVs), peak channels, and histogram distributions can be measured to determine the alignment and functionality of the flow cytometer. Uses: Flow cytometry routine alignment. Pack Sizes: 2 mL. Product ID: DNS-SPR19U. | |
| DMPA-G3-NHS-NHBoc | Improve your research in Biodegradable Polymers with DMPA-G3-NHS-NHBoc, a high-quality Dendrons now available from CD Bioparticles. Group: Dendrons. | |
| DSPE-Hyd-PEG-Alkyne | Augment your research on Biodegradable Polymers with the reliable DSPE-Hyd-PEG-Alkyne from CD Bioparticles Drug Delivery. Group: Ph response. | |
| DSPE-PEG-FITC | CD Bioparticles provides DSPE-PEG-FITC, Fluorescent Lipid PEGs with molecular weight of 1,000 Da for drug delivery. Group: Fluorescent lipid pegs. | |
| DUT-8 (Co) | Take your Metal-organic Frameworks (MOFs) Materials research to the next level by the innovative DUT-8 (Co) from CD Bioparticles Drug Delivery. Group: Cobalt-based mofs (co-mof). | |
| DUT-8 (Ni) | Optimize your research on Ni-MOF with the cutting-edge DUT-8 (Ni) from CD Bioparticles Drug Delivery. Group: Nickel-based mofs (ni-mof). | |
| Ethyl Cellulose | Ethyl Cellulose, a dependable product from CD Bioparticles Drug Delivery, can help you with your research on Celluloses. Group: Celluloses. | |
| Exosome Isolation Kit (Precipitation Method) | This product is an extracellular vesicle separation kit based on precipitation method, suitable for the separation of extracellular vesicles from various samples. It has the advantages of easy operation, fast separation speed, and high recovery rate. The extracellular vesicles isolated by this kit can be used for WB analysis, NTA or nanoflow cytometry particle size analysis, electron microscopy detection, omics research, cellular and animal functional studies, etc. This kit is compatible with multiple sample types and is suitable for serum, plasma, cell culture supernatant, urine, etc. Group: Exosome extraction kits. | |
| Exosomes from A549, a human non-small cell lung cancer cell line | Augment your research on Biodegradable Polymers with the reliable Exosomes from A549, a human non-small cell lung cancer cell line from CD Bioparticles Drug Delivery. Group: Purified exosomes. | |
| Exosomes from PC-3, a human metastatic prostate cancer cell line | Augment your research on Biodegradable Polymers with the reliable Exosomes from PC-3, a human metastatic prostate cancer cell line from CD Bioparticles Drug Delivery. Group: Purified exosomes. | |
| Ficoll-NH2, 100 NH2/polymer | CD Bioparticles provides Ficoll-NH2, 100 NH2/polymer, Ficolls for drug delivery. Group: Ficolls. | |
| Gamma Cyclodextrin | Augment your research on Biodegradable Polymers with the reliable Gamma Cyclodextrin from CD Bioparticles Drug Delivery. Group: Gamma cyclodextrin series. | |
| HA16 | CD Bioparticles provides HA16, Oligomeric Hyaluronic Acids for drug delivery. Group: Oligomeric hyaluronic acids. | |
| HA-PEG | CD Bioparticles provides HA-PEG, Hyaluronic Acids with molecular weight of 2,500 kDa for drug delivery. Group: Hyaluronic acids. | |
| HOMOLICA Anti-His Tag Acceptor Polystyrene Particles, 200 nm | These particles are designed for homogeneous chemiluminescence immunoassay, donor microspheres contain photosensitive dye, while acceptor microspheres contain luminous dye. Microsphere surfaces are separately cross-linked with specific antibodies. After incubation with the mixture to be tested, the two antibodies formed double anti-sandwich immune complexes with the antigen, thus keeping the spacing between the two microheres within 200 nm. By using the donor microsphere, the surrounding oxygen is converted into excited singlet oxygen and spreads to the acceptor microsphere within 200 nm, so as to generate a stable and efficient light signal at 615 nm when excited at 680 nm. Pack Sizes: 250 μg, 5 mg, 25 mg. Product ID: DNG-25VB01-H. | |
| HOMOLICA Anti-Human IgG Donor Polystyrene Particles, 200 nm | These particles are designed for homogeneous chemiluminescence immunoassay, donor microspheres contain photosensitive dye, while acceptor microspheres contain luminous dye. Microsphere surfaces are separately cross-linked with specific antibodies. After incubation with the mixture to be tested, the two antibodies formed double anti-sandwich immune complexes with the antigen, thus keeping the spacing between the two microheres within 200 nm. By using the donor microsphere, the surrounding oxygen is converted into excited singlet oxygen and spreads to the acceptor microsphere within 200 nm, so as to generate a stable and efficient light signal at 615 nm when excited at 680 nm. Pack Sizes: 250 μg, 5 mg, 25 mg. Product ID: DNG-24VB015-H. | |
| HOMOLICA Anti-Human IgG Fc Donor Polystyrene Particles, 200 nm | These particles are designed for homogeneous chemiluminescence immunoassay, donor microspheres contain photosensitive dye, while acceptor microspheres contain luminous dye. Microsphere surfaces are separately cross-linked with specific antibodies. After incubation with the mixture to be tested, the two antibodies formed double anti-sandwich immune complexes with the antigen, thus keeping the spacing between the two microheres within 200 nm. By using the donor microsphere, the surrounding oxygen is converted into excited singlet oxygen and spreads to the acceptor microsphere within 200 nm, so as to generate a stable and efficient light signal at 615 nm when excited at 680 nm. Pack Sizes: 250 μg, 5 mg, 25 mg. Product ID: DNG-24VB017-H. | |
| HOMOLICA Anti-Mouse IgG Donor Polystyrene Particles, 200 nm | These particles are designed for homogeneous chemiluminescence immunoassay, donor microspheres contain photosensitive dye, while acceptor microspheres contain luminous dye. Microsphere surfaces are separately cross-linked with specific antibodies. After incubation with the mixture to be tested, the two antibodies formed double anti-sandwich immune complexes with the antigen, thus keeping the spacing between the two microheres within 200 nm. By using the donor microsphere, the surrounding oxygen is converted into excited singlet oxygen and spreads to the acceptor microsphere within 200 nm, so as to generate a stable and efficient light signal at 615 nm when excited at 680 nm. Pack Sizes: 250 μg, 5 mg, 25 mg. Product ID: DNG-24VB011-H. | |
| HOMOLICA Human IgG1 Detection Kit | This kit is used for human IgG1 detection in various sample matrices such as cell culture supernatant, serum, or buffer via homogeneous chemiluminescence immunoassay. In the assay system, the anti-IgG-conjugated acceptor particles are incubated with the biotin-labeled IgG to form an immune complex, which then reacts with the donor particles to generate a luminescent complex. Upon excitation with 680 nm light, the donor particles produce singlet oxygen, which diffuses to the acceptor beads and transfers energy to generate an emission signal at 615 nm. When IgG is present in the test sample, it competes with the biotin-labeled IgG for binding to the anti-IgG antibody, thereby inhibiting the formation of the luminescent complex. The IgG concentration in the sample is inversely proportional to the light signal. The emitted light is collected by a photosensitive detector, and the IgG concentration is calculated using mathematical fitting. Detection range 0-1 mg/mL. Pack Sizes: 100 Tests. Product ID: HOMO-25VD02-H. | |
| HOMOLICA Human Total IgG Detection Kit | This kit is used for human total IgG detection in various sample matrices such as cell culture supernatant, serum, or buffer via homogeneous chemiluminescence immunoassay. In the assay system, the anti-IgG-conjugated acceptor particles are incubated with the biotin-labeled IgG to form an immune complex, which then reacts with the donor particles to generate a luminescent complex. Upon excitation with 680 nm light, the donor particles produce singlet oxygen, which diffuses to the acceptor beads and transfers energy to generate an emission signal at 615 nm. When IgG is present in the test sample, it competes with the biotin-labeled IgG for binding to the anti-IgG antibody, thereby inhibiting the formation of the luminescent complex. The IgG concentration in the sample is inversely proportional to the light signal. The emitted light is collected by a photosensitive detector, and the IgG concentration is calculated using mathematical fitting. Detection range 0-1 mg/mL. Pack Sizes: 100 Tests. Product ID: HOMO-25VD01-H. | |
| HOMOLICA Mouse IgG1 Detection Kit | This kit is used for mouse IgG1 detection in various sample matrices such as cell culture supernatant, serum, or buffer via homogeneous chemiluminescence immunoassay. In the assay system, the anti-IgG-conjugated acceptor particles are incubated with the biotin-labeled IgG to form an immune complex, which then reacts with the donor particles to generate a luminescent complex. Upon excitation with 680 nm light, the donor particles produce singlet oxygen, which diffuses to the acceptor beads and transfers energy to generate an emission signal at 615 nm. When IgG is present in the test sample, it competes with the biotin-labeled IgG for binding to the anti-IgG antibody, thereby inhibiting the formation of the luminescent complex. The IgG concentration in the sample is inversely proportional to the light signal. The emitted light is collected by a photosensitive detector, and the IgG concentration is calculated using mathematical fitting. Detection range 0-1 mg/mL. Pack Sizes: 100 Tests. Product ID: HOMO-25VD04-H. | |
| HOMOLICA Mouse IgG2a Detection Kit | This kit is used for mouse IgG2a detection in various sample matrices such as cell culture supernatant, serum, or buffer via homogeneous chemiluminescence immunoassay. In the assay system, the anti-IgG-conjugated acceptor particles are incubated with the biotin-labeled IgG to form an immune complex, which then reacts with the donor particles to generate a luminescent complex. Upon excitation with 680 nm light, the donor particles produce singlet oxygen, which diffuses to the acceptor beads and transfers energy to generate an emission signal at 615 nm. When IgG is present in the test sample, it competes with the biotin-labeled IgG for binding to the anti-IgG antibody, thereby inhibiting the formation of the luminescent complex. The IgG concentration in the sample is inversely proportional to the light signal. The emitted light is collected by a photosensitive detector, and the IgG concentration is calculated using mathematical fitting. Detection range 0-1 mg/mL. Pack Sizes: 100 Tests. Product ID: HOMO-25VD05-H. | |
| HOMOLICA Mouse IgG2b Detection Kit | This kit is used for mouse IgG2b detection in various sample matrices such as cell culture supernatant, serum, or buffer via homogeneous chemiluminescence immunoassay. In the assay system, the anti-IgG-conjugated acceptor particles are incubated with the biotin-labeled IgG to form an immune complex, which then reacts with the donor particles to generate a luminescent complex. Upon excitation with 680 nm light, the donor particles produce singlet oxygen, which diffuses to the acceptor beads and transfers energy to generate an emission signal at 615 nm. When IgG is present in the test sample, it competes with the biotin-labeled IgG for binding to the anti-IgG antibody, thereby inhibiting the formation of the luminescent complex. The IgG concentration in the sample is inversely proportional to the light signal. The emitted light is collected by a photosensitive detector, and the IgG concentration is calculated using mathematical fitting. Detection range 0-1 mg/mL. Pack Sizes: 100 Tests. Product ID: HOMO-25VD06-H. | |
| HOMOLICA Mouse Total IgG Detection Kit | This kit is used for mouse total IgG detection in various sample matrices such as cell culture supernatant, serum, or buffer via homogeneous chemiluminescence immunoassay. In the assay system, the anti-IgG-conjugated acceptor particles are incubated with the biotin-labeled IgG to form an immune complex, which then reacts with the donor particles to generate a luminescent complex. Upon excitation with 680 nm light, the donor particles produce singlet oxygen, which diffuses to the acceptor beads and transfers energy to generate an emission signal at 615 nm. When IgG is present in the test sample, it competes with the biotin-labeled IgG for binding to the anti-IgG antibody, thereby inhibiting the formation of the luminescent complex. The IgG concentration in the sample is inversely proportional to the light signal. The emitted light is collected by a photosensitive detector, and the IgG concentration is calculated using mathematical fitting. Detection range 0-1 mg/mL. Pack Sizes: 100 Tests. Product ID: HOMO-25VD03-H. | |
| HOMOLICA Streptavidin Acceptor Polystyrene Particles, 200 nm | These particles are designed for homogeneous chemiluminescence immunoassay, donor microspheres contain photosensitive dye, while acceptor microspheres contain luminous dye. Microsphere surfaces are separately cross-linked with specific antibodies. After incubation with the mixture to be tested, the two antibodies formed double anti-sandwich immune complexes with the antigen, thus keeping the spacing between the two microheres within 200 nm. By using the donor microsphere, the surrounding oxygen is converted into excited singlet oxygen and spreads to the acceptor microsphere within 200 nm, so as to generate a stable and efficient light signal at 615 nm when excited at 680 nm. Pack Sizes: 250 μg, 5 mg, 25 mg. Product ID: DNG-24VB004-H. | |
| HOMOLICA Streptavidin Donor Polystyrene Particles, 200 nm | These particles are designed for homogeneous chemiluminescence immunoassay, donor microspheres contain photosensitive dye, while acceptor microspheres contain luminous dye. Microsphere surfaces are separately cross-linked with specific antibodies. After incubation with the mixture to be tested, the two antibodies formed double anti-sandwich immune complexes with the antigen, thus keeping the spacing between the two microheres within 200 nm. By using the donor microsphere, the surrounding oxygen is converted into excited singlet oxygen and spreads to the acceptor microsphere within 200 nm, so as to generate a stable and efficient light signal at 615 nm when excited at 680 nm. Pack Sizes: 250 μg, 5 mg, 25 mg. Product ID: DNG-24VB003-H. | |
| HO-PEG-OH | Augment your research on Biodegradable Polymers with the reliable HO-PEG-OH from CD Bioparticles Drug Delivery. Group: Poly(ethylene glycol). | |
| HP-NH2 | CD Bioparticles provides HP-NH2, Heparins for drug delivery. Group: Heparins. | |
| ICG@HESSS-DOX | Augment your research on Biodegradable Polymers with the reliable ICG@HESSS-DOX from CD Bioparticles Drug Delivery. Group: Gsh response. | |
| ImmuTurbi Anti-Procalcitonin (PCT) Polystyrene Particles, 0.2 μm | These particles are conjugated with anti-procalcitonin (PCT) antibody which are used for PCT detection via latex immunoturbidimetric assay (LIA). Diameter and detection wavelength can be customed. Detection range 0.2-50 ng/mL. Component R1 solution, standards and quality controls are also available upon request. Uses: Particle-enhanced turbidimetric immune-assay (petia), latex immunoturbidimetric assay (lia). Pack Sizes: 40 mL, 1 L, 5 L. Product ID: LIAR2-24BY01-H. | |
| IRMOF-3 | Maximize the potential of your drug delivery research with IRMOF-3, a top-quality compound available from CD Bioparticles that can accelerate progress in your scientific endeavors. Group: Zinc-based mofs (zn-mof). | |
| KAUST-7 | Optimize your research in drug delivery with KAUST-7, a high-quality metal-organic framework offered by CD Bioparticles to support your scientific inquiries and advance your discoveries. Group: Nickel-based mofs (ni-mof). | |
| LA-PEG-FITC | CD Bioparticles provides LA-PEG-FITC, Fluorescent Heterobifunctional Linear PEGs with a PEG molecular weight of 1,000 Da for drug delivery. Group: Fluorescent heterobifunctional linear pegs. | |
| LLA | CD Bioparticles provides LLA, Monomers for drug delivery. Group: Monomers. | |
| Locust Bean Gum | Take your Biodegradable Polymers research to the next level with the innovative Locust Bean Gum from CD Bioparticles Drug Delivery. Group: Locust bean gum. | |
| MagIso DNA & RNA Magnetic Silica Particles, 600 nm | MagIso DNA & RNA Magnetic Silica Particles, 600 nm are superparamagnetic silica beads with very high surface area intended for nucleic acid extraction and purification. They have low sedimentation rate and fast magnetic response (3-5 min separation time). These particles have been developed for rapid and reliable isolation of nucleic acids from whole blood, plants, tissues, bacteria and other samples. Uses: Widely used to extract nucleic acids from genomic or viral dna from whole blood, cell lysates, or plant tissue. used to extract genomic, plasmid, cosmid, or phage dna from bacterial samples. used to clean-up of dna impurities from enzymatic reactions or chromatin immunoprecipitation (chip) procedures. Pack Sizes: 2mL, 10mL, 100mL. Product ID: WHK-C027. | |
| MagIso Genomic DNA/RNA Purification Kit, Virus | MagIso Genomic DNA/RNA Purification Kit, Virus uses superparamagnetic microparticle based method. Viral nucleic acids can be extracted from various body fluids without centrifugation. This kit uses a pre-fabricated buffer solution without phenols, chloroform and other organic solvents and can directly extract DNA/RNA with high purity. It's especially suitable for automatic extraction of high-throughput workstation. Uses: For viral dna/ rma extraction from fresh or frozen plasma, serum, urine, secretory fluid, viral concentrate, cell culture supernatant or cell-free body fluids. the extracted product does not contain protein, nuclease and other impurities, and can be used for enzyme digestion, pcr amplification, detection and other follow-up experiments. Pack Sizes: 20 preps, 100 preps, 50000 preps. Product ID: WHK-CG10. | |
| Mannan | Revolutionize your Biodegradable Polymers research with Mannan, a high-quality Polysaccharides obtainable from CD Bioparticles Drug Delivery. Group: Other polysaccharides. | |
| Mg2 (dobpdc) | Augment your research on Biodegradable Polymers with the reliable Mg2 (dobpdc) from CD Bioparticles Drug Delivery. Group: Magnesium-based mofs (mg-mof). | |
| MIL-101 (Cr) | Facilitate your research in Chromium-based MOFs (Cr-MOF) with MIL-101 (Cr) available now on CD Bioparticles' website, designed to optimize your studies. Group: Chromium-based mofs (cr-mof). | |
| MIL-101 (Cr) F Free | Improve your research in Metal-organic Frameworks (MOFs) Materials with MIL-101 (Cr) F Free, a high-quality Chromium-based MOFs (Cr-MOF) now available from CD Bioparticles. Group: Chromium-based mofs (cr-mof). | |
| MIL-101 (Cr)-SO3H | Take your Metal-organic Frameworks (MOFs) Materials research to the next level by the innovative MIL-101 (Cr)-SO3H from CD Bioparticles Drug Delivery. Group: Chromium-based mofs (cr-mof). | |
| MIL-124 (In) | Take your Metal-organic Frameworks (MOFs) Materials research to the next level by the innovative MIL-124 (In) from CD Bioparticles Drug Delivery. Group: Indium-based mofs (in-mof). | |
| MIL-53 (Cr) | Augment your research on Chromium-based MOFs (Cr-MOF) with the reliable MIL-53 (Cr) from CD Bioparticles Drug Delivery. Group: Chromium-based mofs (cr-mof). | |
| MIP-202 (Zr) | Elevate your research on Zirconium-based MOFs (Zr-MOF) with the advanced MIP-202 (Zr) from CD Bioparticles Drug Delivery. Group: Zirconium-based mofs (zr-mof). | |
| MOF-177 | Augment your research on Zinc-Based MOFs (Zn-MOF) with the reliable MOF-177 from CD Bioparticles Drug Delivery. Group: Zinc-based mofs (zn-mof). | |
| MOF-74 (Mg) | With the superior MOF-74 (Mg) from CD Bioparticles Drug Delivery, advance your research on Metal-organic Frameworks (MOFs) Materials. Group: Zinc-based mofs (zn-mof). | |
| MOF-801 (Zr) | Take your Metal-organic Frameworks (MOFs) Materials research to the next level with the innovative MOF-801 (Zr) from CD Bioparticles Drug Delivery. Group: Zirconium-based mofs (zr-mof). | |
| MOF-867 | With the superior MOF-867 from CD Bioparticles Drug Delivery, advance your research on Metal-organic Frameworks (MOFs) Materials. Group: Zirconium-based mofs (zr-mof). | |
| mPEG8-DSPE | CD Bioparticles provides mPEG8-DSPE, Monodispersed Linear PEGs for drug delivery. Group: Monodispersed linear pegs. | |
Would you like to list your products on USA Chemical Suppliers?
Our database is helping our users find suppliers everyday.