CD Formulation - Products
CD Formulation is a leading manufacturer of nearly 2,000 chemicals, including pharmaceutical excipients, active pharmaceutical ingredients, cosmetic ingredients, food ingredients and packaging materials.
| Product | Description | |
|---|---|---|
| Sodium hexametaphosphate | Sodium hexametaphosphate. CAS No. 10124-56-8. Pack Sizes: 1 kg. Product ID: CDF4-0184. Molecular formula: H7NaO18P6. Category: Humectants. Product Keywords: Food Ingredients; Humectants; Sodium hexametaphosphate; CDF4-0184; 10124-56-8; H7NaO18P6; 233-343-1; 10124-56-8. Color: White. EC Number: 233-343-1. Physical State: Solid. Solubility: Soluble in water. Insoluble in organic solvents. Boiling Point: 1500°C. Melting Point: 616°C. Density: 2.181 g/mL. |  |
| Sodium Hexeth-4 Carboxylate | Sodium Hexeth-4 Carboxylate. CAS No. 126646-16-0. Pack Sizes: 10 g. Product ID: CDC10-0449. Molecular formula: C14H27NaO6. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium Hexeth-4 Carboxylate; CDC10-0449; 126646-16-0; C14H27NaO6; 126646-16-0. Grade: Industrial grade. Purity: 0.98. | |
| sodium hyaluronate | The PhEur describes sodium hyaluronate as the sodium salt of hyaluronic acid, a glycosaminoglycan consisting of D-glucuronic acid and N-acetyl-D-glucosamine disaccharide units. Sodium hyaluronate occurs as white to off-white powder or granules. It is very hygroscopic. Synonyms: Hyaluronan; hyaluronate sodium; natrii hyaluronas; RITA HA C1-C. CAS No. 9067-32-7. Product ID: PE-0674. Molecular formula: (C14H20NO11Na)n. Mole weight: (401.3)n. Category: Humectant; lubricant; sustained-release agent. Product Keywords: Humectants Excipients; PE-0674; sodium hyaluronate; 9067-32-7; Hyaluronan; hyaluronate sodium; natrii hyaluronas; RITA HA C1-C. Chemical Name: Sodium hyaluronate. Grade: Pharmaceutical grade. Administration route: Topical gel. preparation. Dosage Form: Topical gel. preparation. Stability and Storage Conditions: Sodium hyaluronate should be stored in a cool, dry place in tightly sealed containers. The powder is stable for 3 years if stored in unopened containers. Source and Preparation: Sodium hyaluronate occurs naturally in vitreous humor, serum,chicken combs, shark skin, and whale cartilage; it is usually extracted and purified from chicken combs. It may also be manufactured by fermentation of selected Streptococcus zooepidemicus bacterial strains; sodium hyaluronate is removed from the fermentation medium by filtration and purified by ultrafiltration. It is then precipitated with an organic solvent and | |
| Sodium hydrogen malate | Sodium hydrogen malate. CAS No. 58214-38-3. Pack Sizes: 1 kg. Product ID: CDC10-0226. Molecular formula: C4H5NaO5. Category: Buffering Agents. Product Keywords: Cosmetic Ingredients; Buffering Agents; Sodium hydrogen malate; CDC10-0226; 58214-38-3; C4H5NaO5; 261-169-6; 58214-38-3. Purity: 0.98. EC Number: 261-169-6. Boiling Point: 306.4°C at 760 mmHg. | |
| Sodium hydrogen N-(1-oxotetradecyl)-L-glutamate | Sodium hydrogen N-(1-oxotetradecyl)-L-glutamate. CAS No. 38517-37-2. Pack Sizes: 1 kg. Product ID: CDC10-0397. Molecular formula: C19H34NNaO5. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium hydrogen N-(1-oxotetradecyl)-L-glutamate; CDC10-0397; 38517-37-2; C19H34NNaO5; 253-981-4; 38517-37-2. Purity: 0.98. EC Number: 253-981-4. | |
| Sodium Lactate | Sodium lactate occurs as a clear, colorless, slightly syrupy liquid. It is odorless, or has a slight odor with a characteristic saline taste. It is hygroscopic. Synonyms: E325; 2-hydroxypropanoic acid monosodium salt; Lacolin; lactic acid monosodium salt; lactic acid sodium salt; natrii lactatis solutio; Patlac; Purasal; Ritalac NAL; sodium a-hydroxypropionate. CAS No. 72-17-3. Product ID: PE-0556. Molecular formula: C3H5NaO3. Mole weight: 112.06. Category: Antimicrobial Preservative; Buffering Agents; Emulsifying Agents; flavoring Agents; Humectant. Product Keywords: Stabilizers; Emulsifier Excipients; PE-0556; Sodium Lactate; Antimicrobial Preservative; Buffering Agents; Emulsifying Agents; flavoring Agents; Humectant; C3H5NaO3; 72-17-3. UNII: TU7HW0W0QT. Chemical Name: Sodium lactate. Grade: Pharmceutical Excipients. Administration route: Infiltration; Intraperitoneal; Intravenous; Oral; Intracardiac; Intramuscular; Subcutaneous. Dosage Form: Epidural, IM, IV, and SC injections; oral suspensions; topical gels and solutions. Stability and Storage Conditions: Sodium lactate should be stored in a well-closed container in a cool, dry, place. Sodium lactate is combustible and decomposes upon heating. Commonly used amount and the maximum amount: The maximum dosage for intravenous injection: 50mg; the maximum dosage for general topical preparations: 51.3mg/g. Source and Preparation: Add sodium hydroxide to lactic acid u | |
| Sodium lauroylsarcosinate | Sodium lauroylsarcosinate. Synonyms: n-methyl-n-(1-oxododecyl)glycine sodium salt;N-LAURYL SARCOSINE, SODIUM SALT;N-LAUROYLSARCOSINE NA-SALT;N-LAUROYLSARCOSINE SODIUM SALT;N-LAUROYLSARCOSINE SODIUM SALT HYDRATE;GARDOL;LAUROYLSARCOSINE, SODIUM SALT;N-Methylglycinol. CAS No. 137-16-6. Pack Sizes: 1 kg. Product ID: CDF4-0099. Molecular formula: C15H28NO3.Na. Category: Food Emulsifiers. Product Keywords: Food Ingredients; Food Emulsifiers; Sodium lauroylsarcosinate; CDF4-0099; 137-16-6; C15H28NO3.Na; 205-281-5; 137-16-6. Purity: 0.99. Color: White. EC Number: 205-281-5. Physical State: Powder. Storage: room temp. Application: Sodium lauroyl sarcosinate (INCI) is mild, biodegradable anionic surfactants derived from sarcosine used as a foaming and cleansing agent in shampoo, shaving foam, toothpaste, and foam wash products. The surfactant is amphiphilic due to the hydrophobic 12-carbon chain (lauroyl) and the hydrophilic carboxylate. Melting Point: 46 °C. Density: 1.033 g/mL at 20 °C. | |
| Sodium Lauryl Sulfate | Sodium lauryl sulfate consists of white or cream to pale yellow colored crystals, flakes, or powder having a smooth feel, a soapy, bitter taste, and a faint odor of fatty substances. Synonyms: Dodecyl alcohol hydrogen sulfate, sodium salt; dodecyl sodium sulfate; dodecylsulfate sodium salt; Elfan 240; lauryl sodium sulfate; lauryl sulfate, sodium salt; monododecyl sodium sulfate; natrii laurilsulfas; sodium dodecyl sulfate; sodium n-dodecyl sulfate; sodium laurilsulfate; sodium monododecyl sulfate; sodium monolauryl sulfate; SDS; SLS; sulfuric acid monododecyl ester, sodium salt; Tex. CAS No. 151-21-3. Product ID: PE-0529. Molecular formula: C12H25NaO4S. Mole weight: 288.38. Category: Anionic Surfactant; Detergent; Emulsifying Agents; Skin Penetrant; Tablet and Capsule Lubricant; Wetting Agents. Product Keywords: Surfactant Excipients; Emulsifier Excipients; PE-0529; Sodium Lauryl Sulfate; Anionic Surfactant; Detergent; Emulsifying Agents; Skin Penetrant; Tablet and Capsule Lubricant; Wetting Agents; C12H25NaO4S; 151-21-3. UNII: 368GB5141J. Chemical Name: Sulfuric acid monododecyl ester sodium salt. Grade: Pharmceutical Excipients. Administration route: Oral, sublingual, topical and vaginal. Dosage Form: Dental preparations; oral capsules, suspensions, and tablets; topical and vaginal preparations. Stability and Storage Conditions: Sodium lauryl sulfate is stable under normal storage conditions. However, in s | |
| Sodium Lauryl Sulfoacetate, SLSA COARSE | Sodium Lauryl Sulfoacetate, SLSA COARSE. CAS No. 1847-58-1. Product ID: CDC10-0370. Molecular formula: C14H29NaO5S. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium Lauryl Sulfoacetate, SLSA COARSE; CDC10-0370; 1847-58-1; C14H29NaO5S; 217-431-7; 1847-58-1. Purity: 0.99. Color: White. EC Number: 217-431-7. Physical State: Powder. Solubility: DMSO (Slightly), Methanol (Slightly, Heated). Product Description: SLSA Coarse MB is a anionic base and co-surfactant and has 65% washing active substances (WAS). It forms a stable foam. Since this powder is in coarse form, it is much easier and dust-free to use. Nevertheless, please be sure to wear a dust mask when processing. Mix it in at least 5 times the amount of water, heat it to over 80°C, stirring occasionally, so that it slowly dissolves clear. | |
| Sodium metabisulfite | Sodium metabisulfite. Synonyms: Sodium disulfite, Sodium pyrosulfite. CAS No. 7681-57-4. Pack Sizes: 500 g in poly bottle. Product ID: CDC10-0074. Molecular formula: Na2S2O5. Category: Antioxidant Cosmetic Chemicals. Product Keywords: Cosmetic Ingredients; Antioxidant Cosmetic Chemicals; Sodium metabisulfite; CDC10-0074; 7681-57-4; Na2S2O5; Sodium disulfite, Sodium pyrosulfite; 231-673-0; MFCD00167602; 7681-57-4. Purity: 0.97. Color: White to slightly yellow. EC Number: 231-673-0. Physical State: Powder or crystals. Quality Level: 100. Application: Sodium metabisulfite may be used to initiate the cross-linking of polybutadiene by free radical polymerization. It may be used to prevent the oxidation (as antioxidant) during the preparation of stock solutions of 6-hydroxydopamine (6-OHDA) and 6-OHDA HBr in various studies. Melting Point: >300 °C (lit.). Density: 1.48 g/cm3. Product Description: Sodium metabisulfite (MBS, Sodium disulfite) is the sodium salt of disulphurous (pyrosulfurous) acid. It is also commonly added to various food products and wines as a preservative. | |
| Sodium metasilicate pentahydrate | Sodium metasilicate pentahydrate. CAS No. 10213-79-3. Pack Sizes: 250 g in poly bottle. Product ID: CDC10-0129. Molecular formula: Na2SiO3·5H2O. Category: Cosmetic Chelating Chemicals. Product Keywords: Cosmetic Ingredients; Cosmetic Chelating Chemicals; Sodium metasilicate pentahydrate; CDC10-0129; 10213-79-3; Na2SiO3·5H2O; 229-912-9; MFCD00149176; 10213-79-3. Purity: ≥95.0% (T). Color: White. EC Number: 229-912-9. Physical State: Solid. Quality Level: 200. Boiling Point: N/A. Melting Point: 1088°C. Density: 2.61 g/mL. | |
| Sodium methyl 2-sulphooctadecanoate | Sodium methyl 2-sulphooctadecanoate. CAS No. 4062-78-6. Pack Sizes: 1 kg. Product ID: CDC10-0460. Molecular formula: C19H37NaO5S. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium methyl 2-sulphooctadecanoate; CDC10-0460; 4062-78-6; C19H37NaO5S; 4062-78-6. Purity: 0.98. | |
| Sodium Myristate | Sodium Myristate. CAS No. 822-12-8. Pack Sizes: 10 g. Product ID: CDC10-0418. Molecular formula: C14H27NaO2. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium Myristate; CDC10-0418; 822-12-8; C14H27NaO2; 212-487-9; MFCD00042653; 822-12-8. Purity: 0.99. Color: White. EC Number: 212-487-9. Physical State: Powder. Storage: 2-8°C. Boiling Point: 319.6°C at 760 mmHg. Melting Point: 58.8°C. | |
| Sodium N-methyl-N-(1-oxohexadecyl)aminoacetate | Sodium N-methyl-N-(1-oxohexadecyl)aminoacetate. CAS No. 4028-10-8. Pack Sizes: 1 kg. Product ID: CDC10-0398. Molecular formula: C19H36NNaO3. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium N-methyl-N-(1-oxohexadecyl)aminoacetate; CDC10-0398; 4028-10-8; C19H36NNaO3; 223-705-7; 4028-10-8. Purity: 0.98. EC Number: 223-705-7. Boiling Point: 465°C at 760 mmHg. Density: 0.959 g/cm3. | |
| Sodium N-methyl-N-(1-oxotetradecyl)aminoacetate | Sodium N-methyl-N-(1-oxotetradecyl)aminoacetate. CAS No. 30364-51-3. Pack Sizes: 1 kg. Product ID: CDC10-0446. Molecular formula: C16H30NNaO3. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium N-methyl-N-(1-oxotetradecyl)aminoacetate; CDC10-0446; 30364-51-3; C16H30NNaO3; 250-151-3; 30364-51-3. Purity: 0.9999. Color: White. EC Number: 250-151-3. Physical State: Powder. Boiling Point: 439.5°C at 760 mmHg. | |
| Sodium n-tridecylbenzenesulfonate | Sodium n-tridecylbenzenesulfonate. CAS No. 26248-24-8. Pack Sizes: 1 kg. Product ID: CDC10-0394. Molecular formula: C19H31NaO3S. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium n-tridecylbenzenesulfonate; CDC10-0394; 26248-24-8; C19H31NaO3S; 247-536-3; 26248-24-8. Purity: 0.98. EC Number: 247-536-3. | |
| Sodium Octanoate | White to off-white powder. Synonyms: SODIUM CAPRYLATE; CAPRYLIC ACID SODIUM SALT; OCTANOIC ACID SODIUM SALT; sodiumoctoate; NATRIUMCAPRYLAT; Wodium caprylate; SODIUM OCTANOATE; SODIUM N-OCTOATE; N-OCTANOATESODIUM; Sodium n-caprylate. CAS No. 1984-6-1. Product ID: PE-0620. Molecular formula: C8H15NaO2. Mole weight: 166.19. Category: Protein Stabilizer; Internal absorption enhancer. Product Keywords: Other Materials; Stabilizers; PE-0620; Sodium Octanoate; Protein Stabilizer; Internal absorption enhancer; C8H15NaO2; 1984-06-1. UNII: NA. Chemical Name: Sodium n-Octanoate. Grade: Pharmceutical Excipients. Stability and Storage Conditions: Inert atmosphere, Room Temperature. Applications: In the pharmaceutical industry, biologics (human blood albumin) contain sodium caprylate as an inactive ingredient. Biologically advanced salts are commonly used for special breeding of strains, the reason why salts are used is that they are more soluble than the advanced acids themselves. And the PH is better adjusted. For example, when breeding bacteria that can degrade caprylate, sodium caprylate is added to the medium. Safety: LD50 orally in Rabbit: > 2000 mg/kg. | |
| Sodium o-dodecylbenzenesulphonate | Sodium o-dodecylbenzenesulphonate. CAS No. 15163-46-9. Pack Sizes: 25 kg/BAG. Product ID: CDC10-0451. Molecular formula: C18H29NaO3S. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium o-dodecylbenzenesulphonate; CDC10-0451; 15163-46-9; C18H29NaO3S; 15163-46-9. Grade: Industrial Grade. Color: White or light yellow. Physical State: Solid. Product Description: Sodium Dodecyl benzene Sulfonate (SDBS) is a commonly used anionic surfactant, which is white or Light yellow powdery or flake solid, difficult to volatile, soluble in water and soluble in water to form a translucent solution. | |
| Sodium Oleate | Sodium Oleate. Synonyms: Sodium oleate;oleic acid sodium salt;sodium cis-9-octadecanoate;eunatrol;Lunac SO 90L. CAS No. 143-19-1. Product ID: CDC10-0473. Molecular formula: C18H33NaO2. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium Oleate; CDC10-0473; 143-19-1; C18H33NaO2; Sodium oleate; oleic acid sodium salt; sodium cis-9-octadecanoate; eunatrol; Lunac SO 90L; 205-591-0; MFCD00004438; 143-19-1. Color: White. EC Number: 205-591-0. Physical State: Powder. Storage: -20ºC. Boiling Point: 359.999ºC at 760 mmHg. Melting Point: 232-235ºC(lit.). Density: 0.9 g/cm3. Product Description: Bretazenil (Ro16-6028) is an imidazopyrrolobenzodiazepine anxiolytic drug that is derived from the benzodiazepine family and was invented in 1988. It is most closely related in structure to the benzodiazepine antagonist flumazenil, although its effects are somewhat different. It is classed as a high-potency benzodiazepine due to its high-affinity binding to benzodiazepine binding sites where it acts as a partial agonist. Its profile as a partial agonist and preclinical trial data suggests that it may have a reduced adverse effect profile. In particular, bretazenil has been proposed to cause a less strong development of tolerance and withdrawal syndrome. Bretazenil differs from traditional 1,4-benzodiazepines by being a partial agonist and because it binds to α1, α2, α3, | |
| Sodium Palmitate | Sodium Palmitate. Synonyms: Sodium hexadecanoate;Sodium pentadecanecarboxylate; sodiumhexadecanoate. CAS No. 408-35-5. Pack Sizes: 1 kg. Product ID: CDC10-0472. Molecular formula: C16H31NaO2. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; Sodium Palmitate; CDC10-0472; 408-35-5; C16H31NaO2; Sodium hexadecanoate; Sodium pentadecanecarboxylate; sodiumhexadecanoate; 206-988-1; MFCD00002749; 408-35-5. Purity: 0.98. Color: White. EC Number: 206-988-1. Physical State: Powder. Storage: 2-8°C. Boiling Point: 340.6°C at 760 mmHg. Melting Point: 283-290°C(lit.). | |
| Sodium phosphate | Sodium phosphate. Synonyms: Sodium orthophosphate, Trisodium phosphate. CAS No. 7601-54-9. Pack Sizes: 25, 500 g in poly bottle. Product ID: CDC10-0126. Molecular formula: Na3PO4. Category: Cosmetic Chelating Chemicals. Product Keywords: Cosmetic Ingredients; Cosmetic Chelating Chemicals; Sodium phosphate; CDC10-0126; 7601-54-9; Na3PO4; Sodium orthophosphate, Trisodium phosphate; 231-509-8; MFCD00003510; 7601-54-9. Purity: 0.96. Color: White. EC Number: 231-509-8. Physical State: Solid. Solubility: H2O: slightly soluble(lit.). Quality Level: 200. Storage: Inert atmosphere,Room Temperature. Melting Point: 1583 °C (lit.). Density: 2.536 g/cm3(Temp: 17.5 °C). Product Description: Sodium phosphate is a colorless to white crystalline powder or granules. It is prepared by neutralization of phosphoric acid under controlled conditions with sodium hydroxide or sodium carbonate. | |
| Sodium phosphate,dibasic heptahydrate | Sodium phosphate,dibasic heptahydrate. Synonyms: Disodium hydrogen phosphate heptahydrate, Disodium phosphate. CAS No. 7782-85-6. Pack Sizes: 1 kg. Product ID: CDC10-0229. Molecular formula: H15Na2O11P. Category: Buffering Agents. Product Keywords: Cosmetic Ingredients; Buffering Agents; Sodium phosphate,dibasic heptahydrate; CDC10-0229; 7782-85-6; H15Na2O11P; Disodium hydrogen phosphate heptahydrate, Disodium phosphate; 237-707-0; MFCD00149180; 7782-85-6. Grade: ACS reagent. Purity: 0.99. Color: White. EC Number: 237-707-0. Physical State: Powder. Quality Level: 100. Storage: Store at 5°C to 30°C. Boiling Point: 158°C at 760 mmHg. Melting Point: 48°C. Density: 1.68 g/mL at 25°C(lit.). | |
| Sodium phosphate monobasic | Sodium phosphate monobasic. CAS No. 7558-80-7. Pack Sizes: 1 kg. Product ID: CDF4-0185. Molecular formula: H3O4P.Na. Category: Humectants. Product Keywords: Food Ingredients; Humectants; Sodium phosphate monobasic; CDF4-0185; 7558-80-7; H3O4P.Na; 231-449-2; 7558-80-7. Color: White. EC Number: 231-449-2. Physical State: Powder. Solubility: H2O: 5 M, clear, colorless. Storage: room temp. Boiling Point: 100°C. Melting Point: <0°C. Density: 1.40 g/mL at 20 °C. | |
| Sodium Phosphate Monobasic | The hydrated forms of monobasic sodium phosphate occur as odorless, colorless or white, slightly deliquescent crystals. The anhydrous form occurs as a white crystalline powder or granules. Synonyms: Acid sodium phosphate; E339; Kalipol 32; monosodium orthophosphate; monosodium phosphate; natrii dihydrogenophosphas dihydricus; phosphoric acid, monosodium salt; primary sodium phosphate; sodium biphosphate; sodium dihydrogen orthophosphate; sodium dihydrogen phosphate. Product ID: PE-0557. Category: Buffering Agents; Emulsifying Agents; Sequestering Agents. Product Keywords: Excipients for Liquid Dosage Form; Emulsifier Excipients; PE-0557; Sodium Phosphate Monobasic; Buffering Agents; Emulsifying Agents; Sequestering Agents;. UNII: 3980JIH2SW. Grade: Pharmceutical Excipients. Administration route: Injections; infusions; ophthalmic, oral, topical, and vaginal. Dosage Form: Injections; infusions; ophthalmic, oral, topical, and vaginal preparations. Stability and Storage Conditions: Monobasic sodium phosphate is chemically stable, although it is slightly deliquescent. On heating at 100°C, the dihydrate loses all of its water of crystallization. On further heating, it melts with decomposition at 205°C, forming sodium hydrogen pyrophosphate, Na2H2P2O7. At 250°C it leaves a final residue of sodium metaphosphate, NaPO3. Aqueous solutions are stable and may be sterilized by autoclaving. Monobasic sodium phosphate sho | |
| Sodium phosphate tribasic dodecahydrate | Sodium phosphate tribasic dodecahydrate. Synonyms: TSP, Trisodium phosphate (tert) dodecahydrate, Trisodium phosphate dodecahydrate. CAS No. 10101-89-0. Product ID: CDC10-0125. Molecular formula: Na3PO4·12H2O. Category: Cosmetic Chelating Chemicals. Product Keywords: Cosmetic Ingredients; Cosmetic Chelating Chemicals; Sodium phosphate tribasic dodecahydrate; CDC10-0125; 10101-89-0; Na3PO4·12H2O; Trisodium phosphate dodecahydrate; 231-509-8; MFCD00149198; 10101-89-0. Purity: ≥98%. EC Number: 231-509-8. Physical State: Crystalline. Solubility: Alcohol: insoluble. Quality Level: 200. Storage: Store at 5°C to 30°C. Application: Sodium phosphate tribasic dodecahydrate was used to prepare buffer solution used in the analysis of pyronaridine in human whole blood and plasma by using high-performance liquid chromatography. Melting Point: 75 °C. Density: 1.62 g/mL at 25 °C. | |
| Sodium polyacrylate | Sodium polyacrylate. CAS No. 9003-4-7. Product ID: PE-0280. Molecular formula: C3H4O2. Mole weight: 72.06. Category: Dispersants; Plasters Base. Product Keywords: Pharmaceutical Excipients; Excipients for Semi-solid Dosage Form; Plasters Base; Sodium polyacrylate; PE-0280; C3H4O2; 9003-04-7; 9003-04-7. Appearance: Powder. Purity: 0.99. EC Number: 999-999-2. Storage: 2-8°C. Density: 1.32 g/mL at 25 °C. | |
| Sodium Polystyrene Sulfonate | Sodium Polystyrene Sulfonate. Synonyms: Poly(sodium-p-styrenesulfonate); PSS. CAS No. 25704-18-1. Product ID: PE-0437. Category: Coagulant; dispersant. Product Keywords: Pharmaceutical Excipients; Excipients for Liquid Dosage Form; Sodium Polystyrene Sulfonate; Dispersion Excipients; Coagulant; dispersant; 25704-18-1; 25704-18-1. UNII: 1699G8679Z. Grade: Pharmceutical Excipients. Administration route: Eye; Oral. Dosage Form: Suspension (including sustained-release formulations), sustained-release capsules and sustained-release tablets. Stability and Storage Conditions: Store in a well-sealed container. Commonly used amount and the maximum amount: Maximum oral dosage: 300mg; Dental external use and oral use: 20mg/g. Source and Preparation: This product is a copolymer of ethyl acrylate and methyl methacrylate and trimethyl ammonium methacrylate chloride. This product is divided into type A and type B by copolymer composition. When the drying product of the two types of copolymer is quantified, the copolymer composition is respectively trimethyl ammonium chloride (C9H18ClNO 2:207.70) 8.85 - 11.96% and 4.48 - 6.77%. | |
| Sodium Propionate | Sodium Propionate. Synonyms: Propionic acid sodium salt. CAS No. 137-40-6. Pack Sizes: 100, 500 g in poly bottle. Product ID: CDC10-0316. Molecular formula: C3H5NaO2. Category: Cosmetic Preservatives. Product Keywords: Cosmetic Ingredients; Cosmetic Preservatives; Sodium Propionate; CDC10-0316; 137-40-6; C3H5NaO2; Propionic acid sodium salt; 205-290-4; MFCD00002759; 137-40-6. Purity: ≥99.0%. Color: White. EC Number: 205-290-4. Physical State: Powder. Storage: Inert atmosphere,Room Temperature. Application: Sodium propionate has been used as a supplement in transgalacto-oligosaccharides (TOS) medium for the isolation of bifidobacteria. It has been used as a supplement in SCFA (short-chain fatty acid) diet prepared for mice. Boiling Point: 141.7ºC at 760 mmHg. Melting Point: 285-286ºC. Product Description: Propionate is a short chain fatty acid, which is a major part of the luminal contents of the colon. It is associated with anti-inflammatory properties. | |
| SODIUM P-TOLUENESULFONATE | SODIUM P-TOLUENESULFONATE. CAS No. 12068-03-0. Pack Sizes: 1 kg. Product ID: CDC10-0476. Molecular formula: C7H7NaO3S. Category: Cosmetic Surfactants. Product Keywords: Cosmetic Ingredients; Cosmetic Surfactants; SODIUM P-TOLUENESULFONATE; CDC10-0476; 12068-03-0; C7H7NaO3S; 235-088-1; 12068-03-0. Purity: 0.98. EC Number: 235-088-1. | |
| Sodium pyrophosphate decahydrate | Sodium pyrophosphate decahydrate. CAS No. 13472-36-1. Product ID: CDC10-0128. Molecular formula: Na4P2O7·10H2O. Category: Cosmetic Chelating Chemicals. Product Keywords: Cosmetic Ingredients; Cosmetic Chelating Chemicals; Sodium pyrophosphate decahydrate; CDC10-0128; 13472-36-1; Na4P2O7·10H2O; 231-767-1; MFCD00149200; 13472-36-1. Purity: ≥99%. EC Number: 231-767-1. Physical State: Crystals or chunks. Solubility: H2O: 0.1 M at 20 °C, clear, colorless. Quality Level: 200. Storage: Store at 5°C to 30°C. Boiling Point: 93.8°C. Melting Point: 80°C. Density: 1.82 g/mL. | |
| Sodium pyrophosphate tetrabasic | Sodium pyrophosphate tetrabasic. Synonyms: Sodium diphosphate tetrabasic, Tetrasodium pyrophosphate. CAS No. 7722-88-5. Pack Sizes: 500 g in poly bottle. Product ID: CDC10-0127. Molecular formula: Na4P2O7. Category: Cosmetic Chelating Chemicals. Product Keywords: Cosmetic Ingredients; Cosmetic Chelating Chemicals; Sodium pyrophosphate tetrabasic; CDC10-0127; 7722-88-5; Na4P2O7; Sodium diphosphate tetrabasic, Tetrasodium pyrophosphate; 231-767-1; MFCD00003513; 7722-88-5. Purity: ≥95%. Color: White. EC Number: 231-767-1. Physical State: Powder. Quality Level: 200. Storage: Inert atmosphere,Room Temperature. Application: Na4P2O7 can be used as an inorganic additive to improve the stability and electrochemical performance of redox flow batteries. Boiling Point: 93.8°C. Melting Point: 80°C. Density: 2.53 g/mL at 25 °C (lit.). Product Description: Sodium pyrophosphate tetrabasic (Na4P2O7) is a non-toxic and biocompatible compound used as an electroactive media for exfoliation of the surface coating. It is also be used as an additive in the food industry. | |
| Sodium salicylate | Sodium salicylate. Synonyms: Sdium salicylate;Sodium Salicylate 2-Hydroxybenzoic acid monosodium salt Sodium o-hydroxybenzoate;Sodium salicylate BP98. CAS No. 54-21-7. Pack Sizes: 1 kg. Product ID: CDC10-0326. Molecular formula: C7H5NaO3. Category: Cosmetic Preservatives. Product Keywords: Cosmetic Ingredients; Cosmetic Preservatives; Sodium salicylate; CDC10-0326; 54-21-7; C7H5NaO3; Sdium salicylate; Sodium Salicylate 2-Hydroxybenzoic acid monosodium salt Sodium o-hydroxybenzoate; Sodium salicylate BP98; 200-198-0; MFCD00002440; 54-21-7. Purity: 0.98. Color: White. EC Number: 200-198-0. Physical State: Powder. Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed. Boiling Point: 336.3°C at 760 mmHg. Melting Point: 200°C. Product Description: Incompatible with mineral acids, metallic salts, iodine. May be light-sensitive. | |
| SODIUM SESQUICARBONATE DIHYDRATE | SODIUM SESQUICARBONATE DIHYDRATE. Synonyms: Carbonicacid, sodiumsalt(2:3); magadisoda; snowflakecrystals; sq810; Sodium Sesquicarbonat; trisodiumhydrogendicarbonate; urao; SODIUM CARBONATE, SESQUIOXIDE DIHYDRATE. CAS No. 533-96-0. Pack Sizes: 1 kg. Product ID: CDF4-0003. Molecular formula: CH3NaO3. Category: Acidity Regulators. Product Keywords: Food Ingredients; Acidity Regulators; SODIUM SESQUICARBONATE DIHYDRATE; CDF4-0003; 533-96-0; CH3NaO3; 208-580-9; 533-96-0. Purity: 0.99. EC Number: 208-580-9. Application: Detergent and soap builder, mild alkaline agent for general cleaning and water softening, bath crys- tals, alkaline agent in leather tanning, food additive. Density: 2.112 g/mL. | |
| Sodium Sorbate | Sodium Sorbate. CAS No. 7757-81-5. Pack Sizes: 100 g. Product ID: CDC10-0346. Molecular formula: C6H7NaO2. Category: Cosmetic Preservatives. Product Keywords: Cosmetic Ingredients; Cosmetic Preservatives; Sodium Sorbate; CDC10-0346; 7757-81-5; C6H7NaO2; 7757-81-5. Purity: 0.98. Boiling Point: 233°C at 760 mmHg. | |
| Sodium Sorbate | Sodium Sorbate. Synonyms: SORBIC ACID SODIUM SALT;SODIUM SORBATE;SODIUM 2,4-HEXADIENOATE;2,4-hexadienoicacid,sodiumsalt;sodiumhexa-2,4-dienoate;sorbansodny;sodium (E,E)-hexa-2,4-dienoate;SORBIC ACID SODIUM SALT 98+%. CAS No. 7757-81-5. Pack Sizes: 1 kg. Product ID: CDF4-0127. Molecular formula: C6H7NaO2. Category: Food Preservatives. Product Keywords: Food Ingredients; Food Preservatives; Sodium Sorbate; CDF4-0127; 7757-81-5; C6H7NaO2; 231-819-3; 7757-81-5. Purity: 0.99. Color: White to Light yellow. EC Number: 231-819-3. Physical State: Powder to crystal. Application: Food preservative. | |
| Sodium Starch Glycolate | Sodium starch glycolate is a white or almost white free-flowing very hygroscopic powder. Synonyms: Carboxymethyl starch, sodium salt; carboxymethylamylum natricum; Explosol; Explotab; Glycolys; Primojel; starch carboxymethyl ether, sodium salt; Tablo; Vivastar P. CAS No. 9063-38-1. Product ID: PE-0643. Mole weight: 5×10^5~1×10^6. Category: Disintegrants; Suspending Agentss. Product Keywords: Excipients for Liquid Dosage Form; Suspending Agents; PE-0643; Sodium Starch Glycolate; Disintegrants; Suspending Agentss; ; 9063-38-1. UNII: N/A. Chemical Name: Sodium carboxymethyl starch. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral capsules and tablets. Stability and Storage Conditions: Tablets prepared with sodium starch glycolate have good storage properties. Sodium starch glycolate is stable although very hygroscopic, and should be stored in a well-closed container in order to protect it from wide variations of humidity and temperature, which may cause caking. The physical properties of sodium starch glycolate remain unchanged for up to 5 years if it is stored at moderate temperatures and humidity. Source and Preparation: Sodium starch glycolate is a substituted derivative of potato starch. Typically, commercial products are also crosslinked using either sodium trimetaphosphate (Types A and B) or dehydration (Type C). Starch is carboxymethylated by reacting it with sodium chloroa | |
| Sodium Starch Glycolate Type A | Sodium starch glycolate is a white or almost white free-flowing very hygroscopic powder. Synonyms: Carboxymethyl starch, sodium salt Type A. CAS No. 9063-38-1. Product ID: PE-0641. Mole weight: 5×10^5~1×10^6. Category: Disintegrants; Suspending Agentss. Product Keywords: Excipients for Liquid Dosage Form; Suspending Agents; PE-0641; Sodium Starch Glycolate Type A; Disintegrants; Suspending Agentss; ; 9063-38-1. UNII: N/A. Chemical Name: Sodium carboxymethyl starch. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral capsules and tablets. Stability and Storage Conditions: Tablets prepared with sodium starch glycolate have good storage properties. Sodium starch glycolate is stable although very hygroscopic, and should be stored in a well-closed container in order to protect it from wide variations of humidity and temperature, which may cause caking. The physical properties of sodium starch glycolate remain unchanged for up to 3 years if it is stored at moderate temperatures and humidity. Source and Preparation: Sodium starch glycolate is a substituted derivative of potato starch. Typically, commercial products are also crosslinked using either sodium trimetaphosphate (Types A and B) or dehydration (Type C). Starch is carboxymethylated by reacting it with sodium chloroacetate in an alkaline, nonaqueous medium, typically denatured ethanol or methanol, followed by neutralization | |
| Sodium Starch Glycolate(Type B) | Sodium starch glycolate is a white or almost white free-flowing very hygroscopic powder. Synonyms: Carboxymethyl starch, sodium salt. CAS No. 9063-38-1. Product ID: PE-0642. Mole weight: 5×10^5~1×10^6. Category: Disintegrants; Suspending Agentss. Product Keywords: Excipients for Liquid Dosage Form; Suspending Agents; PE-0642; Sodium Starch Glycolate(Type B); Disintegrants; Suspending Agentss; ; 9063-38-1. UNII: N/A. Chemical Name: Sodium carboxymethyl starch. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral capsules and tablets. Stability and Storage Conditions: Tablets prepared with sodium starch glycolate have good storage properties. Sodium starch glycolate is stable although very hygroscopic, and should be stored in a well-closed container in order to protect it from wide variations of humidity and temperature, which may cause caking. The physical properties of sodium starch glycolate remain unchanged for up to 4 years if it is stored at moderate temperatures and humidity. Source and Preparation: Sodium starch glycolate is a substituted derivative of potato starch. Typically, commercial products are also crosslinked using either sodium trimetaphosphate (Types A and B) or dehydration (Type C). Starch is carboxymethylated by reacting it with sodium chloroacetate in an alkaline, nonaqueous medium, typically denatured ethanol or methanol, followed by neutralization with | |
| Sodium stearate | Sodium stearate is the sodium salt of stearic acid. This White solid is the most common soap. It is found in many types of solid deodorants, rubbers, latex paints, and inks. It is also a component of some food additives and food flavorings. CAS No. 822-16-2. Product ID: PE-0254. Molecular formula: C18H35NaO2. Mole weight: 306.459. Category: Drop Pill Base. Product Keywords: Pharmaceutical Excipients; Semi-solid Dosage Form; Drop Pill Base; Sodium stearate; PE-0254; C18H35NaO2; 822-16-2; 822-16-2. Appearance: White to off-white powder or granule. Synonym(s): sodium,octadecanoate;Sodium stearate. Storage: 2-8ºC. Boiling Point: 359.4ºC at 760 mmHg. Melting Point: 245 - 255ºC. Density: 1.103 g/cm3. | |
| Sodium Stearate | Sodium Stearate. Synonyms: Sodium octadecanoate; Stearic acid sodium salt. CAS No. 822-16-2. Product ID: PE-0567. Molecular formula: C18H35O2Na. Mole weight: 306.47. Category: Base Agents; Emulsifier; Thickener; Lubricant. Product Keywords: Excipients for Liquid Dosage Form; Emulsifier Excipients; PE-0567; Sodium Stearate; Base Agents; Emulsifier; Thickener; Lubricant; C18H35O2Na; 822-16-2. UNII: QU7E2XA9TG. Chemical Name: Sodium Stearate. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral Tablet. Stability and Storage Conditions: Keep in a good air-tight container. Commonly used amount and the maximum amount: For general external preparation, the maximum dosage is 90mg/g, for rectum, cavity, urethra administration, the maximum dosage is 280mg. Source and Preparation: This product is prepared by saponification of stearic acid and sodium hydroxide, containing a mixture of sodium stearate and sodium palmitate, but mainly sodium stearate. Safety: This product is safe, non-toxic and does not irritate the skin. | |
| SODIUM STEAROYL LACTYLATE | SODIUM STEAROYL LACTYLATE. Synonyms: Octadecanoicacid, 2-(1-carboxyethoxy)-1-methyl-2-oxoethylester, sodiumsalt; sodium2-stearoyllactate; SODIUMSTEAROYLLACTYLATE, FCC; SODIUM STEAROYL LACTYLATE(SSL);Natrium-2-stearoyllactat;Sodium stearyl 2-lactylate;sodium stearoyl lactate(SSL);SODIUM STEAROYL-2-LACTYLATE. CAS No. 25383-99-7. Pack Sizes: 1 kg. Product ID: CDF4-0110. Molecular formula: C21H39NaO4. Category: Food Emulsifiers. Product Keywords: Food Ingredients; Food Emulsifiers; SODIUM STEAROYL LACTYLATE; CDF4-0110; 25383-99-7; C21H39NaO4; 246-929-7; 25383-99-7. Purity: 0.99. EC Number: 246-929-7. Storage: Inert atmosphere,Room Temperature. Application: sodium stearoyl lactylate is an emulsifier. It can be obtained from natural or synthetic sources. Density: 1.002[at 20°C]. | |
| Sodium Stearyl Fumarate | Sodium Stearyl Fumarate. Synonyms: SODIUM STEARYL FUMARATE;sodium octadecyl fumarate; SodiumStearylFumarate (Excipient)OpenPartDmf; Sodium Stearyl Fumarate (Excipient);Monosodium stearyl fumarate;2-Butenedioic acid (2E)-, monooctadecyl ester, sodium salt;SODIUMSTEARYLFUMARATE, FCC;SODIUMSTEARYLFUMARATE, NF. CAS No. 4070-80-8. Pack Sizes: 5 g. Product ID: CDF4-0090. Molecular formula: C22H39NaO4. Category: Flour Treatment Agents. Product Keywords: Food Ingredients; Flour Treatment Agents; Sodium Stearyl Fumarate; CDF4-0090; 4070-80-8; C22H39NaO4; 223-781-1; 4070-80-8. Purity: 0.99. Color: White to Off-White. EC Number: 223-781-1. Physical State: Neat. Solubility: Practically insoluble in water, slightly soluble in methanol, practically insoluble in acetone and in anhydrous ethanol. Storage: Inert atmosphere,Room Temperature. Application: Sodium Stearyl Fumarate is a dough conditioner and conditioning agent that is a white powder practically insoluble in water. It is used as a dough conditioner in yeast-raised baked goods. It is used as a conditioning agent in dehydrated potatoes. It also functions as a maturing and bleaching agent. Melting Point: >196°C (dec.). Product Description: Sodium Stearyl Fumarate (SSF) is used as a lubricant in tableting to reduce the friction between the tablet and the die wall and to prevent adhesion of the material to punches or the die wall in the pharmaceutical industries. It is use | |
| Sodium sulfate | Sodium sulfate (Na2SO4) is sulfate and sodium ions generated salt and sodium sulfate in water and its aqueous solution is neutral, soluble in glycerin and not soluble in ethanol. CAS No. 7757-82-6. Product ID: PE-0087. Molecular formula: Na2O4S. Mole weight: 142.042. Category: Antioxidants. Product Keywords: Pharmaceutical Excipients; Injections & Sterile Formulation; Antioxidants; Sodium sulfate; PE-0087; Na2O4S; 7757-82-6; 7757-82-6. Appearance: White crystals or powder. Purity: 0.99. Storage: Store at RT. Boiling Point: 330°C at 760 mmHg. Melting Point: 884°C(lit.). Density: 2.68 g/cm3. | |
| Sodium sulfite | Sodium sulfite. CAS No. 7757-83-7. Pack Sizes: 100 mg. Product ID: CDC10-0075. Molecular formula: Na2SO3. Category: Antioxidant Cosmetic Chemicals. Product Keywords: Cosmetic Ingredients; Antioxidant Cosmetic Chemicals; Sodium sulfite; CDC10-0075; 7757-83-7; Na2SO3; 231-821-4; MFCD00003503; 7757-83-7. Purity: ≥98%. EC Number: 231-821-4. Physical State: Powder or crystals. Solubility: H2O: 1 M at 20 °C, clear, colorless. Quality Level: 100. Storage: Store at 5°C to 30°C. Melting Point: 500 °C. Density: 2.63 g/cm3. | |
| Sodium thiosulfate | Sodium thiosulfate. CAS No. 7772-98-7. Product ID: PE-0095. Molecular formula: Na2S2O3. Category: Antioxidants. Product Keywords: Pharmaceutical Excipients; Injections & Sterile Formulation; Antioxidants; Sodium thiosulfate; PE-0095; Na2S2O3; 7772-98-7; 7772-98-7. Grade: purum p.a. Purity: ≥98.0% (RT). Color: White. EC Number: 231-867-5. Physical State: Crystals. Solubility: Immiscible with alcohol. Quality Level: 200. Storage: Store at 5°C to 30°C. Boiling Point: 100°C. Melting Point: 48°C. Density: 1.01 g/mL at 25 °C. Product Description: The product is anhydrous sodium thiosulfate (Na2S2O3). It can be obtained from Na2S2O3.10H2O by heating above 100°C. It can be synthesized from sodium sulfate. | |
| Sodium thiosulfate | Sodium thiosulfate. CAS No. 7772-98-7. Pack Sizes: 1 Kg. Product ID: CDC10-0077. Molecular formula: Na2S2O3. Category: Antioxidant Cosmetic Chemicals. Product Keywords: Cosmetic Ingredients; Antioxidant Cosmetic Chemicals; Sodium thiosulfate; CDC10-0077; 7772-98-7; Na2S2O3; 231-867-5; MFCD00003499; 7772-98-7. Grade: purum p.a. Purity: ≥98.0% (RT). Color: White. EC Number: 231-867-5. Physical State: Crystals. Solubility: Immiscible with alcohol. Quality Level: 200. Storage: Store at 5°C to 30°C. Boiling Point: 100°C. Melting Point: 48°C. Density: 1.01 g/mL at 25 °C. Product Description: The product is anhydrous sodium thiosulfate (Na2S2O3). It can be obtained from Na2S2O3.10H2O by heating above 100°C. It can be synthesized from sodium sulfate. | |
| Sodium thiosulfate pentahydrate | Sodium thiosulfate pentahydrate. CAS No. 10102-17-7. Pack Sizes: 25, 500 g in poly bottle. Product ID: CDC10-0078. Molecular formula: Na2S2O3 · 5H2O. Category: Antioxidant Cosmetic Chemicals. Product Keywords: Cosmetic Ingredients; Antioxidant Cosmetic Chemicals; Sodium thiosulfate pentahydrate; CDC10-0078; 10102-17-7; Na2S2O3 · 5H2O; 231-867-5; MFCD00149186; 10102-17-7. Purity: ≥99.5%. Color: White tranparent. EC Number: 231-867-5. Physical State: Crystals. Quality Level: 200. Storage: Store at 5°C to 30°C. Application: Applied in a widely useful, thiosulfate-assisted, synthesis of a variety of diamine-CuCN complexes. Boiling Point: 100°C. Melting Point: 48°C. Density: 1.01 g/mL at 25 °C. | |
| Sodium tripolyphosphate | Sodium tripolyphosphate. Synonyms: Pentasodium tripolyphosphate Anhydrous, STPP, Sodium triphosphate, Sodium triphosphate pentabasic, Sodium tripolyphosphate pentabasic. CAS No. 7758-29-4. Product ID: CDC10-0130. Molecular formula: Na5P3O10. Category: Cosmetic Chelating Chemicals. Product Keywords: Cosmetic Ingredients; Cosmetic Chelating Chemicals; Sodium tripolyphosphate; CDC10-0130; 7758-29-4; Na5P3O10; Pentasodium tripolyphosphate Anhydrous, STPP, Sodium triphosphate, Sodium triphosphate pentabasic, Sodium tripolyphosphate pentabasic; 231-838-7; MFCD00003514; 7758-29-4. Purity: 0.85. EC Number: 231-838-7. Physical State: Powder. Solubility: H2O: may be clear to slightly hazy. Quality Level: 100. Storage: Storage temperature: no restrictions. Melting Point: 622 °C. Density: 2.52 g/cm3 (20°C). | |
| Solanum tuberdsm powder | Solanum tuberdsm powder is made of solanum tuberdsm as raw material and processed by spray drying technology. Product ID: CDF4-0229. Category: Flavour. Product Keywords: Flavor Enhancers; Solanum tuberdsm powder; CDF4-0229; Flavour;. Grade: Food Grade. Color: Purple powder. Physical State: powder. Storage: Room Temperature. Applications: Widely used in baking, pastry, meal replacement powder. | |
| Solifenacin Succinate | Solifenacin succinate (YM905) is an antimuscarinic urospasmolytic. CAS No. 242478-38-2. Product ID: PAP-0089. Molecular formula: C27H32N2O6. Product Keywords: Other Active Pharmaceutical Ingredients; Solifenacin Succinate; PAP-0089; ; C27H32N2O6; 242478-38-2. Appearance: Solid. Standard: EP. Grade: CEP/ISO. Color: White to Off-White. Physical State: solid. Solubility: Methanol (Slightly, Heated, Sonicated), Water (Slightly, Sonicated). Storage: under inert gas (nitrogen or Argon) at 2-8°C. Applications: Muscle M3 receptor blockers, which work by relaxing the bladder muscles to stop the urgency and frequency of urination that occurs in the treatment of overactive bladder. Melting Point: ~145°. | |
| Sorbic acid | Sorbic acid. Synonyms: (e,e)-4-hexadienoicacid;(E,E)-Sorbic acid;2,4-Hexadienoicacid,(E,E)-;2e,4e-hexadienoicacid;4-Hexadienoicacid,(E,E)-2;2-PROPENYL ACRYLIC ACID;1,3-Pentadiene-1-carboxylic acid;2,4-HEXANEDIENOIC ACID. CAS No. 110-44-1. Pack Sizes: 250 mg. Product ID: CDF4-0114. Molecular formula: C6H8O2. Category: Food Preservatives. Product Keywords: Food Ingredients; Food Preservatives; Sorbic acid; CDF4-0114 110-44-1; C6H8O2; 203-768-7; 110-44-1. Purity: 0.99. Color: White or cream-White. EC Number: 203-768-7. Physical State: Crystalline Powder. Solubility: ethanol: 0.1 g/mL, clear. Storage: 2-8°C. Boiling Point: 228°C. Melting Point: 132-135 °C (lit.). Density: 1.2 g/cm3 at 20 °C. | |
| Sorbic acid | Sorbic acid is a new, safe, nontoxic and effective food preservative. It is unsaturated fatty acid. It can participate in normal metabolism and finally be oxidized to water and carbon dioxide, does not accumulate in the human body and has high safety. CAS No. 110-44-1. Product ID: PE-0056. Molecular formula: C6H8O2. Mole weight: 112.127. Category: Preservatives Excipients. Product Keywords: Pharmaceutical Excipients; Liquid Dosage Form; Injections & Sterile Formulation; Semi-solid Dosage Form; Suppository Bases; Preservatives Excipients; Sorbic acid; PE-0056; C6H8O2; 110-44-1; 110-44-1. Appearance: White crystalline powder. Purity: 0.99. EC Number: 203-768-7. Solubility: water, 1910 mg/L @ 30 °C (exp). Storage: 2-8°C. Boiling Point: 228°C. Melting Point: 132-135°C. Density: 1.205 g/cm3. | |
| SORBIC ACID VINYL ESTER | SORBIC ACID VINYL ESTER. Synonyms: SORBIC ACID VINYL ESTER;VINYL SORBATE;Vinyl Sorbate (stabilized with MEHQ);Vinyl Sorbate ;Sorbic Acid Vinyl Ester (stabilized with MEHQ);2,4-Hexadienoic acid, ethenyl ester, (2E,4E)-;SORBIC ACID VINYL ESTER USP/EP/BP. CAS No. 42739-26-4. Product ID: CDF4-0124. Molecular formula: C8H10O2. Category: Food Preservatives. Product Keywords: Food Ingredients; Food Preservatives; SORBIC ACID VINYL ESTER; CDF4-0124; 42739-26-4; C8H10O2; 42739-26-4. Boiling Point: 4 °C / 6mmHg. Density: 0.96 g/mL. | |
| Sorbic chloride | Sorbic chloride. Synonyms: Sorbic chloride;(2E,4E)-hexa-2,4-dienoyl chloride;(2E,4E)-2,4-Hexadienoyl chloride;(E,E)-2,4-Hexadienoyl chloride;Sorbic acid chloride;trans,trans-Hexa-2,4-dienoyl chloride;2,4-Hexadienoyl chloride, (2E,4E)-;Sorbic chloride USP/EP/BP. CAS No. 2614-88-2. Pack Sizes: 1 g. Product ID: CDF4-0129. Molecular formula: C6H7ClO. Category: Food Preservatives. Product Keywords: Food Ingredients; Food Preservatives; Sorbic chloride; CDF4-0129; 2614-88-2; C6H7ClO; 2614-88-2. Purity: 0.99. Boiling Point: 169.4°C (rough estimate). Density: 1.0666 g/mL. | |
| Sorbitan Monostearate | Cream solid. Synonyms: Ablunol S-60; Alkamuls SMS; 1, 4-Anhydro-D-glucitol, 6-octadecanoate; anhydrosorbitol monostearate; Arlacel 60; Armotan MS; Atlas 110K; Capmul S; Crill 3; Dehymuls SMS; Drewmulse SMS; Drewsorb 60K; Durtan 6O; Durtan 60K; E491; Famodan MS Kosher; Glycomul S FG; Glycomul S KFG; Hodag SMS; Lamesorb SMS; Liposorb S; Liposorb SC; Liposorb S-K; Montane 60; Nissan Nonion SP-60R; Norfox Sorbo S-60FG; Pol. CAS No. 1338-41-6. Product ID: PE-0535. Molecular formula: C24H46O6. Mole weight: 431. Category: Dispersing Agents; Emulsifying Agents; Nonionic Surfactant; solubilizing Agents; Suspending Agents; Wetting Agents. Product Keywords: Surfactant Excipients; Emulsifier Excipients; Solubilizer Excipients; ; PE-0535; Sorbitan Monostearate; Dispersing Agents; Emulsifying Agents; Nonionic Surfactant; solubilizing Agents; Suspending Agents; Wetting Agents; C24H46O6; 1338-41-6. UNII: NVZ4I0H58X. Chemical Name: Sorbitan mono-octadecanoate. Grade: Pharmceutical Excipients. Administration route: Administration of topical preparations, sublingual administration, rectal cavity urethral administration, dental external application and tablet use. Dosage Form: Inhalation, intramuscular, ophthalmic, oral, topical and vaginal formulations. Stability and Storage Conditions: Gradually saponified under strong acid or strong base; stable in weak acid or weak base. Sorbitan ethoxylate should be packed in airtight conta | |
| Sorbitan oleate(Span 80) | Sorbitan oleate(Span 80). CAS No. 1338-43-8. Product ID: PE-0627. Molecular formula: C24H44O6. Mole weight: 429. Category: Surfactant. Product Keywords: Excipients for Liquid Dosage Form; Surfactant Excipients; PE-0627; Sorbitan oleate(Span 80); Surfactant; C24H44O6; 1338-43-8. UNII: 06XEA2VD56. Chemical Name: (Z)-Sorbitan mono-9-octadecenoate. Grade: Pharmceutical Excipients. Administration route: Oral administration, local administration, rectal administration. Dosage Form: Inhalants, intramuscular injections, ophthalmic, oral, topical and vaginal preparations. Stability and Storage Conditions: Gradually saponification under strong acid or base conditions; Stable in a weak acid or base. Sorbitan ester should be packed in an airtight container and stored in a cool and dry place. Source and Preparation: Sorbitol is dehydrated to form 1, 4-sorbitan, which is then esterified with oleic acid. Applications: Sorbitan ester, as a lipophilic nonionic surfactant, is widely used in cosmetics, food and pharmaceuticals. They are used primarily as emulsifiers in the preparation of creams, emulsions and ointments for topical applications. When used alone, sorbitan ester can produce stable water-in-oil emulsions and microemulsions, but when combined with polysorbitan ester in different proportions, various water-in-oil or oil-in-water emulsions or creams can be prepared. Safety: Sorbitan ester is widely used in cosmetic | |
| Sorbitan Sesquioleate | Sorbitan esters occur as cream- to amber-colored liquids or solids with a distinctive odor and taste. Synonyms: Span-83. CAS No. 8007-43-0. Product ID: PE0388. Molecular formula: C33H60O6.5. Mole weight: 561. Category: Dispersants; Emulsifiers; Surfactants; Suspending Agentss; Wetting Agentss. Product Keywords: Dispersion Excipients; Humectants Excipients; Emulsifier Excipients; Solubilizer Excipients; PE0388; Sorbitan Sesquioleate; Dispersants; Emulsifiers; Surfactants; Suspending Agentss; Wetting Agentss; C33H60O6.5; 8007-43-0. UNII: 0W8RRI5W5A. Chemical Name: (Z)-Sorbitan sesqui-9- octadecenoate. Grade: Pharmceutical Excipients. Administration route: Oral administration, intravenous injection, general topical preparation administration, transdermal administration, sublingual administration, rectal cavity urethral administration. Dosage Form: Inhalations; IM injections; ophthalmic, oral, topical, and vaginal preparations. Stability and Storage Conditions: Gradual soap formation occurs with strong acids or bases; sorbitan esters are stable in weak acids or bases. Sorbitan esters should be stored in a well-closed container in a cool, dry place. Source and Preparation: Sorbitol is dehydrated to form a hexitan (1, 4-sorbitan), which is then esterified with the desired fatty acid. Applications: Sorbitan monoesters are a series of mixtures of partial esters of sorbitol and its mono- and dianhydrides with fatty ac | |
| Sorbitan Trioleate(span 85) | This product is an amber viscous liquid. Synonyms: Ablunol S-85; Arlacel 85; Crill 45; Glycomul TO; Hodag STO; Liposorb TO; Montane 85; Nissan Nonion OP-85R; Protachem STO; Protesorb STO; S-Maz 85K; Sorbester P37; sorbitani trioleas; Span 85; Tego STO. CAS No. 26266-58-0. Product ID: PE-0431. Molecular formula: C60H108O8. Mole weight: 957.49. Category: Surfactant; Emulsifier; Lubricant; Humectants; Dispersant; Thickener; Defoamer. Product Keywords: Pharmaceutical Excipients; Excipients for Liquid Dosage Form; Sorbitan Trioleate(span 85); Dispersion Excipients; Surfactant; Emulsifier; Lubricant; Humectants; Dispersant; Thickener; Defoamer; C60H108O8; 26266-58-0; 26266-58-0. UNII: QE6F49RPJ1. Chemical Name: (Z, Z, Z)-Sorbitan tri-9-octadecenoate. Grade: Pharmceutical Excipients. Administration route: Inhalation; Nasal Administration; Oral; Topical. Dosage Form: Oral inhalation, topical formulation. Stability and Storage Conditions: Gradually saponified under strong acid or strong base; stable in weak acid or weak base. It should be packed in an airtight container and stored in a cool and dry place. Source and Preparation: This product is a mixture of sorbitol mono-dehydrate, di-dehydrate and three molecules of oleic acid. Its production method is to firstly dehydrate sorbitol at 150-152°C, and esterify it with three molecules of oleic acid under the catalysis of sodium bicarbonate. Or it can be prepared b | |
| Sorbitan Trioleate(span 85) | This product is an amber viscous liquid. Synonyms: Ablunol S-85; Arlacel 85; Crill 45; Glycomul TO; Hodag STO; Liposorb TO; Montane 85; Nissan Nonion OP-85R; Protachem STO; Prote- sorb STO; S-Maz 85K; Sorbester P37; sorbitani trioleas; Span 85; Tego STO. CAS No. 26266-58-0. Product ID: PE0397. Molecular formula: C60H108O8. Mole weight: 957.49. Category: Surfactants; Emulsifiers; Lubricants; Humectants; Dispersants; Thickeners. Product Keywords: Pharmaceutical Excipients; Other Materials; Humectants; Sorbitan Trioleate(span 85); PE0397; QE6F49RPJ1; 26266-58-0; 26266-58-0. UNII: QE6F49RPJ1. Chemical Name: (Z,Z,Z)-Sorbitan tri-9-octadecenoate. Grade: Pharmceutical Excipients. Administration route: Inhalation; Nasal Administration; Oral; Topical. Dosage Form: Oral inhalation, topical formulation. Stability and Storage Conditions: Gradually saponified under strong acid or strong base; stable in weak acid or weak base. It should be packed in an airtight container and stored in a cool and dry place. Source and Preparation: This product is a mixture of sorbitol mono-dehydrate, di-dehydrate and three molecules of oleic acid. Its production method is to firstly dehydrate sorbitol at 150-152°C, and esterify it with three molecules of oleic acid under the catalysis of sodium bicarbonate. Or it can be prepared by direct esterification of α-sorbitol and three molecules of oleic acid at 180-280°C. Applications: | |
| Sorbitan Trioleate(span 85) | This product is an amber viscous liquid. Synonyms: Ablunol S-85; Arlacel 85; Crill 45; Glycomul TO; Hodag STO; Liposorb TO; Montane 85; Nissan Nonion OP-85R; Protachem STO; Protesorb STO; S-Maz 85K; Sorbester P37; sorbitani trioleas; Span 85; Tego STO. CAS No. 26266-58-0. Product ID: PE-0528. Molecular formula: C60H108O8. Mole weight: 957.49. Category: Surfactant; Emulsifier; Lubricant; Humectants; Dispersant; Thickener; Defoamer. Product Keywords: Surfactant Excipients; Emulsifier Excipients; PE-0528; Sorbitan Trioleate(span 85); Surfactant; Emulsifier; Lubricant; Humectants; Dispersant; Thickener; Defoamer; C60H108O8; 26266-58-0. UNII: QE6F49RPJ1. Chemical Name: (Z, Z, Z)-Sorbitan tri-9-octadecenoate. Grade: Pharmceutical Excipients. Administration route: Inhalation; Nasal Administration; Oral; Topical. Dosage Form: Oral inhalation, topical formulation. Stability and Storage Conditions: Gradually saponified under strong acid or strong base; stable in weak acid or weak base. It should be packed in an airtight container and stored in a cool and dry place. Source and Preparation: This product is a mixture of sorbitol mono-dehydrate, di-dehydrate and three molecules of oleic acid. Its production method is to firstly dehydrate sorbitol at 150-152°C, and esterify it with three molecules of oleic acid under the catalysis of sodium bicarbonate. Or it can be prepared by direct esterification of α-sorbito | |
| Sorbitan Tristearate | Sorbitan Tristearate. Synonyms: Alkamuls STS; Crill 35; Crill 41; Drewsorb 65K; E492; Famodan TS Kosher; Glycomul TS KFG; Hodag STS; Lamesorb STS; Liposorb TS; Liposorb TS-K; Montane 65; Protachem STS; Proteo-sorb STS; orbester P38; Span 65; Span 65K. CAS No. 26658-19-5. Product ID: PE-0527. Molecular formula: C60H114O8. Mole weight: 963.54. Category: Emulsifier; Defoaming Agents; Stabilizer. Product Keywords: Stabilizers; Emulsifier Excipients; PE-0527; Sorbitan Tristearate; Emulsifier; Defoaming Agents; Stabilizer; C60H114O8; 26658-19-5. UNII: 6LUM696811. Chemical Name: Sorbitan tri-octadecanoate. Grade: Pharmceutical Excipients. Stability and Storage Conditions: Gradually saponification under strong acid or base conditions; Stable in a weak acid or base. Store in an airtight container in a cool and dry place. Source and Preparation: It is formed from sorbitol dehydrated to sorbitol anhydride and esterified with excess stearic acid. Applications: This product is used in medicine, cosmetics, textile, paint, explosives industry as emulsifier, but also as textile oil agent, oil deep well weighted mud as emulsifier, paint industry as dispersant, oil products as a cosolvent and rust prevention agent. W/O food emulsifier, used alone or in combination with Tween-60, Tween-80 and Tween-65 ~ Chinese regulations can be used for cream, hydrogenated vegetable oil, instant coffee and dry yeast, the maximum dosage is 10.0 | |
| Sorbitol | Sorbitol is D-glucitol. It is a hexahydric alcohol related to mannose and is isomeric with mannitol. Sorbitol occurs as an odorless, white or almost colorless, crystalline, hygroscopic powder. Four crystalline polymorphs and one amorphous form of sorbitol have been identified that have slightly different physical properties, e.g. melting point.Sorbitol is available in a wide range of grades and polymorphic forms, such as granules, flakes, or pellets that tend to cake less than the powdered form and have more desirable compression characteristics. Sorbitol has a pleasant, cooling, sweet taste and has approximately 50-60% of the sweetness of sucrose. Synonyms: C*PharmSorbidex; E420; 1, 2, 3, 4, 5, 6-hexanehexol; Liponic 70-NC; Liponic 76-NC; Meritol; Neosorb; Sorbitab; sorbite; Dsorbitol; Sorbitol Instant; sorbitolum; Sorbogem. CAS No. 50-70-4. Product ID: PE0398. Molecular formula: C6H14O6. Mole weight: 182.17. Category: Humectant; Plasticizer; Stabilizing Agents; Sweetening Agents; Tablet and Capsule Diluent. Product Keywords: Stabilizers; Emulsifier Excipients; Humectants Excipients; Carrier Excipients; PE0398; Sorbitol; Humectant; Plasticizer; Stabilizing Agents; Sweetening Agents; Tablet and Capsule Diluent; C6H14O6; 50-70-4. UNII: 506T60A25R. Chemical Name: D-glucitol. Grade: Pharmceutical Excipients. Administration route: Oral; intramuscular; intraarticular; rectal, topical, and vaginal. Dosage Form: Intra-articular | |
| Sorbitol Sorbitan Solution | Sorbitol Sorbitan Solution. Product ID: PE-0664. Category: Soft capsule moisturizer, plasticizer. Product Keywords: Plasticizer Excipients; Sorbitol Sorbitan Solution; PE-0664; Soft capsule moisturizer, plasticizer;. Grade: Pharmaceutical Grade. Physical State: Liquid. Solubility: Shanlichun Shanlitan Rongye soluble in water. Storage: below +30°C. Applications: Sorbitan solution is used as a humectant and plasticizer in softgel capsules to maintain the proper water balance in the capsule shell, increase the finish and keep the capsule soft and tough. | |
| Soya Lecithin | Soya Lecithin. Synonyms: Soya beam lecithin; Soya lecithin. CAS No. 8030-76-0. Product ID: PE-0517. Category: Emulsifier. Product Keywords: Solubilizer Excipients; Emulsifier Excipients; Solubilizer Excipients; ; PE-0517; Soya Lecithin; Emulsifier; ; 8030-76-0. UNII: 1DI56QDM62. Grade: Pharmceutical Excipients. Administration route: Oral; Inhaling aerosol; Vaginal mucosa administration. Dosage Form: Oral administration; Inhaling aerosol; Vaginal mucosa administration. Stability and Storage Conditions: Dark, sealed, stored below -18°C. Commonly used amount and the maximum amount: Oral: Maximum dosage is 0.2% or 20mg; Inhalation aerosol: maximum dosage 0.1%; Ointment: Maximum dosage is 1%. Source and Preparation: Soybean phospholipid is a phospholipid mixture extracted and refined from soybean. | |
| Soybean flour | Soybean flour. Synonyms: Glycine Soja (Soybean) Flour. CAS No. 68513-95-1. Product ID: CDC10-0021. Category: Cosmetic Chemical Abrasives. Product Keywords: Cosmetic Ingredients; Cosmetic Chemical Abrasives; Soybean flour; CDC10-0021; 68513-95-1; Glycine Soja (Soybean) Flour; 614-554-1; 68513-95-1. EC Number: 614-554-1. Physical State: Lyophilized Powder. Storage: 2-8°C. Boiling Point: N/A. Melting Point: N/A. Density: N/A. Product Description: Soybean Flour is used as an emollient skin conditioner and hair conditioner. | |
| Soybean oil | Soybean oil. Synonyms: Best One Soya;Bionatrol;CAP 18;CAP 18 (oil);CT 7000;Destiny HC;Fats and Glyceridic oils, soybean;HY 3050. CAS No. 8001-22-7. Pack Sizes: 250 mL in poly bottle. Product ID: CDC10-0079. Category: Antioxidant Cosmetic Chemicals. Product Keywords: Cosmetic Ingredients; Antioxidant Cosmetic Chemicals; Soybean oil; CDC10-0079; 8001-22-7; Best One Soya; Bionatrol; CAP 18; CAP 18 (oil); CT 7000; Destiny HC; Fats and Glyceridic oils, soybean; HY 3050; 232-274-4; MFCD00132356; 8001-22-7. Purity: 0.99. Color: Colorless to Yellow. EC Number: 232-274-4. Physical State: Oil. Quality Level: 200. Storage: 2-8°C. Application: It may be used as a crude source for triglycerides and other lipids. Soybean oil is a potential raw material in oxygenated fatty acid production. It may be used in the synthesis of epoxidized-soybean oil (ESO). Density: 0.917 g/mL at 25 °C(lit.). Product Description: Soybean oil (SBO) is a vegetable oil widely used as biodegradable lubricant. It increases left ventricular contractility associated myosin ATPase and sarcoplasmic reticulum calcium pump (SERCA2a) in isolated hearts from rats. SBO is shown to reduce both total and non-HDL serum cholesterol and triglycerides induced by atherogenic diet in rats. It may be transesterified to biodiesel using CaO as a solid base catalyst. It may also be transesterified to biodiesel using methanol and ethanol. | |
| Soybean Oil | Soybean oil as the refined fixed oil obtained from the seeds of the soya plant Glycine max Merr. (Fabaceae); if an antoxidant is added, the name and quantity must be specified on the label. Synonyms: Aceite de soja; Calchem IVO-114; Lipex 107; Lipex 200; Shogun CT; soiae oleum raffinatum; soja bean oil; soyabean oil; soya bean oil. CAS No. 8001-22-7. Product ID: PE-0513. Category: Carrier Excipients. Product Keywords: Pharmaceutical Excipients; Other Materials; Soybean Oil; Carrier Excipients; Carrier Excipients; 8001-22-7; 8001-22-7. UNII: 241ATL177A. Chemical Name: Soybean oil. Grade: Pharmceutical Excipients. Administration route: IV, oral and topical. Dosage Form: IV injections, oral capsules, and topical preparations; chewable tablets; oral lozenges; topical bath additives. Stability and Storage Conditions: Soybean oil is a stable material if protected from atmospheric oxygen.The formation of undesirable flavors in soybean oil is accelerated by the presence of 0.01 ppm copper and 0.1 ppm iron, which act as catalysts for oxidation; this can be minimized by the addition of chelating agents. Prolonged storage of soybean oil emulsions, particularly at elevated temperatures, can result in the formation of free fatty acids, with a consequent reduction in the pH of the emulsion; degradation is minimized at pH 6-7. However, soybean oil emulsions are stable at room temperature if stored under nitrogen in a light-resistant | |
| SOYBEAN OIL | SOYBEAN OIL. Synonyms: Best One Soya;Bionatrol;CAP 18;CAP 18 (oil);CT 7000;Destiny HC;Fats and Glyceridic oils, soybean;HY 3050. CAS No. 8001-22-7. Product ID: CDF4-0010. Category: Coating Agents. Product Keywords: Food Ingredients; Coating Agents; SOYBEAN OIL; CDF4-0010; 8001-22-7; 232-274-4; 8001-22-7. Purity: 0.99. Color: Colorless to yellow. EC Number: 232-274-4. Physical State: Oil. Storage: 2-8°C. Density: 0.917 g/mL at 25 °C(lit.). Product Description: Pale-yellow, fixed drying oil.Soluble in alcohol, ether, chloroform, and carbon disulfide. Combustible. | |
| Soybean Oil (For Injection) | Soybean Oil (For Injection). CAS No. 8001-22-7. Product ID: PE-0646. Category: Solvents and dispersants. Product Keywords: Dispersion Excipients; Soybean Oil (For Injection); PE-0646; Solvents and dispersants; ; 8001-22-7. Grade: Pharmaceutical Grade. Color: Colorless to Yellow. EC Number: 232-274-4. Physical State: Liquid. Storage: 2-8°C. Applications: Soybean oil can be used as a carrier for oral or intravenous administration. | |
| Soybean peptide | Soybean peptide is made from non-transgenic soybean protein isolate or edible soybean meal by enzymatic hydrolysis. The essential amino acid composition of soybean peptide is complete, which is a complete vegetable protein, and it is a potential functional food raw material. Product ID: CDF4-0249. Category: Protein peptide. Product Keywords: Protein Peptides; Soybean peptide; CDF4-0249; Protein peptide;. Applications: It is widely used in food, cosmetics and medicine. Product Description: The amino acid composition of soybean peptide is complete, rich in nutrition, small molecular weight, easy absorption, high heat and acid stability, easy to dissolve, no bean smell. | |
Would you like to list your products on USA Chemical Suppliers?
Our database is helping our users find suppliers everyday.