CD Formulation - Products
CD Formulation is a leading manufacturer of nearly 2,000 chemicals, including pharmaceutical excipients, active pharmaceutical ingredients, cosmetic ingredients, food ingredients and packaging materials.
| Product | Description | |
|---|---|---|
| Medium chain triglyceride MCT-SM50 microencapsulated powder | Vegetarian, instant. Product ID: CDF4-0199. Molecular formula: NA. Category: Fat supplement. Product Keywords: Food Ingredients; Nutrients; CDF4-0199; Medium chain triglyceride MCT-SM50 microencapsulated powder; Fat supplement. Physical State: powder. Source and Preparation: Palm kernel oil/Coconut oil source. Applications: Soft drinks, solid drinks, etc. |  |
| Medium-chain triglycerides | A colorless to slightly yellowish oily liquid that is practically odorless and tasteless. The oil is free from catalytic residues or the products of cracking. Synonyms: Bergabest; caprylic/capric triglyceride; Captex 300; Captex 355; Crodamol GTCC-PN; glyceryl tricaprylate/caprate; Labrafac CC; Labrafac Lipo; MCT oil; Miglyol 810; Miglyol 812; Myritol; Neobee M5; Nesatol; oleum neutrale; oleum vegetable tenue; thin vegetable oil; triglycerida saturata media; Waglinol 3/9280. CAS No. 73398-61-5. Product ID: PE-0544. Mole weight: 500 (average). Category: Emulsifying Agents; Solvent; Suspending Agents; therapeutic Agents. Product Keywords: Suspending Agents; Emulsifier Excipients; PE-0544; Medium-chain triglycerides; Emulsifying Agents; Solvent; Suspending Agents; therapeutic Agents; ; 73398-61-5. UNII: NA. Chemical Name: Medium-chain triglycerides. Grade: Pharmceutical Excipients. Administration route: Topical. Dosage Form: Topical preparations. Stability and Storage Conditions: Medium-chain triglycerides are stable over the wide range of storage temperatures that can be experienced in tropical and temperate climates. Ideally, however, they should be stored at temperatures not exceeding 25°C and not exposed to temperatures above 40°C for long periods. At low temperatures, samples of medium-chain triglycerides may become viscous or solidify. Samples should therefore be well melted and mixed before use, althou | |
| Meglumine | Meglumine occurs as a white to slightly yellow-colored crystalline powder; it is odorless or with a slight odor. Synonyms: Meglumin; meglumina; megluminum; 1-methylamino-1-deoxy-Dglucitol; N-methylglucamine; N-methyl-D-glucamine. CAS No. 6284-40-8. Product ID: PE-0598. Molecular formula: C7H17NO5. Mole weight: 195.21. Category: Organic Base: pH regulator; Solubilizing Agents. Product Keywords: Excipients for Liquid Dosage Form; Solubilizer Excipients; PE-0598; Meglumine; Organic Base: pH regulator; Solubilizing Agents; C7H17NO5; 6284-40-8. UNII: 6HG8UB2MUY. Chemical Name: 1-Deoxy-1-(methylamino)-D-glucitol. Grade: Pharmceutical Excipients. Administration route: Intramuscular injection; Intravenous injection; Oral. Dosage Form: Injection, tablet, capsule. Stability and Storage Conditions: Meglumine does not polymerize or dehydrate unless heated above 150°C for prolonged periods. The bulk material should be stored in a well-closed container in a cool, dry place. Meglumine should not be stored in aluminum containers since it reacts to evolve hydrogen gas; it discolors if stored in containers made from copper or copper alloys. Stainless steel containers are recommended. Source and Preparation: Meglumine is prepared by the imination of glucose and monomethylamine, in an alcoholic solution, followed by catalytic hydrogenation. Applications: Meglumine is an organic base used as a pH-adjusting agent and solubilizing agent, primar | |
| Melatonin, Powder | Melatonin, Powder. Synonyms: N-Acetyl-5-methoxytryptamine. CAS No. 73-31-4. Pack Sizes: 250 mg in glass bottle. Product ID: CDC10-0059. Molecular formula: C13H16N2O2. Category: Antioxidant Cosmetic Chemicals. Product Keywords: Cosmetic Ingredients; Antioxidant Cosmetic Chemicals; Melatonin, Powder; CDC10-0059; 73-31-4; C13H16N2O2; N-Acetyl-5-methoxytryptamine; 200-797-7; MFCD00005655; 73-31-4. Purity: ≥98% (TLC). Color: White to off-white. EC Number: 200-797-7. Physical State: Powder. Solubility: Ethanol: 50 mg/mL. Quality Level: 200. Boiling Point: 374.44°C (rough estimate). Melting Point: 116.5-118 °C (lit.). Density: 1.1099 g/m(rough estimate). | |
| Meprednisone | Methylprednisolone is a medium effect steroid hormone, which is synthesized artificially. In addition to alleviating the effect of spinal cord edema, the application of large doses of methylprednisolone can inhibit the lipid peroxidation Chemicalbook that causes neuropathy, increase the excitability of spinal cord nerves, accelerate the recovery process of neurophysiological function, and metabolism does not pass through the liver. It has a small effect on the metabolism of water and sodium, and can directly avoid the effect of target cells. CAS No. 1247-42-3. Product ID: PAP-0081. Molecular formula: C22H28O5. Category: Hormone drug. Product Keywords: Hormone Series; Meprednisone; PAP-0081; Hormone drug; C22H28O5; 1247-42-3. Appearance: Solid. Standard: USP. Color: White to Off-White. Physical State: powder. Solubility: Chloroform (Slightly), Methanol (Slightly). Storage: Refrigerator. Applications: Methylprednisone is mainly used in the clinical treatment of primary and secondary renal cortical dysfunction, brain edema, rheumatism, acute bronchitis, skin diseases, lupus erythematosus, nausea and vomiting caused by tumor chemotherapy and many other diseases. Boiling Point: 574.4±50.0 °C(Predicted). Melting Point: 204-206°C. Density: 1.28±0.1 g/cm3(Predicted). | |
| Meropenem Sodium Carbonate | Meropenem with sodium carbonate is a salt form of Meropenem, a β-lactam antibiotic of the carbapenem subclass that has been shown to inhibit penicillinase-negative, -positive and methicillin-susceptible staphylococci. This compound demonstrates the ability to also affect strains of 11 species of streptococci. Mechanistic studies suggest that Meropenem's antimicrobial activity is based on its high affinity for the majority of penicillin-binding proteins, which are cell wall-synthesizing enzymes. Meropenem is very effective because it resists inactivation by the majority of microbial LACTB (β-lactamases) as well as kidney dehydropeptidase I. Experiments have shown Meropenem to have a low toxicity profile and, in contrast to similar compounds, no central nervous system toxicity. Synonyms: (4R, 5S, 6S)-3-[[(3S, 5S)5-[(Dimethylamino)carbonyl]-3-pyrrolidinyl]thio]-6-((1R)-1-hydroxyethyl)-4-methyl-7-oxo-1-azabicyclo[3, 2, 0]hept-2-ene-2-carboxyloc acid. CAS No. 96036-03-2 free acid. Product ID: PAP-0097. Molecular formula: C17H25N3O5S xNa2CO3. Mole weight: 383.46 (free acid). Product Keywords: Antibacterial, Anti-inflammatory and Antiviral Series; PAP-0097; Meropenem Sodium Carbonate; 96036-03-2 free acid; (4R, 5S, 6S)-3-[[(3S, 5S)5-[(Dimethylamino)carbonyl]-3-pyrrolidinyl]thio]-6-((1R)-1-hydroxyethyl)-4-methyl-7-oxo-1-azabicyclo[3, 2, 0]hept-2-ene-2-carboxyloc acid. Chemical Name: Meropenem with sodium carbona | |
| Metallized/transparent PVC twist film | Metallized/Transparent PVC twist film is made by extrusion, calender, stretch, sliting. There istransparent,metalized and red metallized of three type. Product ID: PM-061. Category: Packaging film material. Product Keywords: Plastic Packaging; Metallized/transparent PVC twist film; PM-061; Packaging film material;. Administration route: Widely applied in sweet packing, excellent to printingmachine and high-speed automated packing, the packing speed is about 500-600 paces a minute. High twisttensile strength and can hold the twist tightly. The film thickness is 25-35 micron, max stretch width is3600mm. | |
| Metatartaric acid | Metatartaric acid. Synonyms: Metatartaric acid;Metatartaricaci;Metatartaric acid USP/EP/BP. CAS No. 39469-81-3. Product ID: CDF4-0005. Molecular formula: C8H8O10. Category: Acidity Regulators. Product Keywords: Food Ingredients; Acidity Regulators; Metatartaric acid; CDF4-0005; 39469-81-3; C8H8O10; 39469-81-3. Purity: 0.99. | |
| Methacrylic Acid Copolymer Type B | Methacrylic acid copolymer type B, United States Pharmacopeia (USP) Reference Standard. CAS No. 25086-15-1. Product ID: PE-0202. Category: Coating Systems Excipients. Product Keywords: Pharmaceutical Excipients; Solid Dosage Form; Coating Systems Excipients; Methacrylic Acid Copolymer Type B; PE-0202; 25086-15-1; 25086-15-1. Synonym(s): Poly(methyl methacrylate-co-methacrylic acid), Poly(methacrylic acid-co-methyl methacrylate). Storage: Preserve in tight containers. | |
| Methacrylic Acid Copolymer Type C | Methacrylic Acid Copolymer is a fully polymerized copolymer of methacrylic acid and an acrylic or methacrylic ester. Type C may contain suitable surface-active agents. The assay and viscosity requirements differ for the several types, as set forth in the accompanying table. CAS No. 25212-88-8. Product ID: PE-0203. Category: Coating Systems Excipients. Product Keywords: Pharmaceutical Excipients; Solid Dosage Form; Coating Systems Excipients; Methacrylic Acid Copolymer Type C; PE-0203; 25212-88-8; 25212-88-8. Appearance: Neat. Standard: USP. Grade: Pharmaceutical primary standard. | |
| METHACYCLINEHYDROCHLORIDE | Metacycline hydrochloride is a semi-synthetic oxytetracycline, which can inhibit G+ and G- bacteria, Rickettsia, actinomyces, Chlamydia trachomatis and protozoa. Synonyms: MethacyclineHCl (PhysioMycine) ; Rondomycinhydrochloride; 6- methyl eneoxytetracyclinehydrochloride, Metacyclinehydrochloride, LondoMycin; (4S, 4aR, 5S, 5aR, 12aS) -4- (di methyl amino) -1, 4, 4a, 5, 5a, 6, 11, 12a-octahydro-3, 5, 10, 12, 12a-pentahydroxy-6- methyl ene-1, 1Chemicalbook1-dioxo-2-naphthacenecarboxamide, hydrochloride (1: 1) ; MethacyclinehydrochlorideSolution, 100ppm; Hydrochloricacidmethacycline; 6-DE methyl -6-DEOXY-6-MET. CAS No. 3963-95-9. Product ID: PAP-0048. Molecular formula: C22H23ClN2O8. Category: Anti-Infectives. Product Keywords: Antibacterial, Anti-inflammatory and Antiviral Series; METHACYCLINEHYDROCHLORIDE; PAP-0048; Anti-Infectives; C22H23ClN2O8; 3963-95-9. Appearance: Crystalline Powder. Standard: EP/USP. Chemical Name: 6- methyl eneoxytetracyclinehydrochloride, Metacyclinehydrochloride, LondoMycin; (4S, 4aR, 5S, 5aR, 12aS) -4- (di methyl amino) -1, 4, Chemicalbook4a, 5, 5a, 6, 11, 12a-octahydro-3, 5, 10, 12, 12a-pentahydroxy-6- methyl ene-1, 11-dioxo-2-naphthacenecarboxamide, hydrochloride (1: 1) . Grade: Pharmaceutical Grade. Color: Yellow. Source and Preparation: The product is semi-synthetic oxytetracycline, using oxytetracycline as raw material, the first preparation of metacycline hydrochloride, the total yield of oxytetracycline is about 41%. Solubility: DMSO (Slightly, | |
| Methionine | Methionine occurs as a white or almost white, crystalline powder or colorless crystals. Synonyms: α-Amino-g-methylmercaptobutyric acid; (S)-2-amino-4- (methylthio)butanoic acid; 2-amino-4-(methylthio)butyric acid; L - methionine; methioninum; g-methylthio-a-aminobutyric acid. CAS No. 63-68-3. Product ID: PE-0424. Molecular formula: C5H11NO2S. Mole weight: 149.21. Category: Flavoring agent. Product Keywords: Pharmaceutical Excipients; Excipients for Liquid Dosage Form; Methionine; Corrective Agents; Flavoring agent; C5H11NO2S; 63-68-3; 63-68-3. UNII: AE28F7PNPL. Chemical Name: (2S)-2-Amino-4-methylsulfanylbutanoic acid. Grade: Pharmceutical Excipients. Administration route: Oral; Injection. Dosage Form: Oral tablets; Injection solutions; powders for reconstitution. Stability and Storage Conditions: Methionine is sensitive to light and should be stored in a cool, dark place. Source and Preparation: Numerous methods have been described for manufacture of methionine, including hydrolysis of methionine amide and 5-(methylmercaptoethyl)-hydantoin. Applications: Methionine is used in oral pharmaceutical formulations as a flavoring agent. It has been included in parenteral formulations as a pH controlling agent, and it has also been used experimentally as an antioxidant with antibodies. Methionine is also used therapeutically in oral tablets. Safety: Methionine is used in oral pharmaceutical formulations. The pure form of | |
| Methoxy polyethylene glycol-poly(D, L-lactic acid) | Custom. Synonyms: MPEG-PLA. Product ID: PE-0507. Molecular formula: CH3(C2H4))m(C6H10O2)n. Mole weight: PEG(2000; 3400; 5000); PLA(1000-60000). Category: Carrier Excipients. Product Keywords: Pharmaceutical Excipients; Other Materials; Methoxy polyethylene glycol-poly(D, L-lactic acid); Carrier Excipients; Carrier Excipients; CH3(C2H4))m(C6H10O2)n. Chemical Name: Methoxy polyethylene glycol-poly(D, L-lactic acid). Grade: Pharmceutical Excipients. Stability and Storage Conditions: MPEG-PLGA is sensitive to light and temperature, for best use, the material should always be kept dry at low temperature and avoid frequent thawing and freezing. MPEG-PLGA should be kept dry at a low temperature below 4°C, protected from light, and the material can be handled under an inert gas for optimal stability. Retest the material after 12 months. Applications: Methoxypolyethylene glycol-polylactic acid (mPEG-PLA) is a block copolymer, one end is a hydrophilic segment - methoxypolyethylene glycol, and the other end is an lipophilic segment - polylactic acid. By adjusting the molecular weight or the ratio of hydrophilic/lipophilic segments, methoxypolyethylene glycol-polylactic acid can be used as a carrier material for different types of drugs, and improve the water solubility, encapsulation efficiency and drug loading of drugs. Methoxypolyethylene glycol-polylactic acid can be made into drug-loaded | |
| Methoxy-polyethylene glycol polysodium glutamate | Custom. Product ID: PE-0511. Category: Carrier Excipients. Product Keywords: Pharmaceutical Excipients; Other Materials; Methoxy-polyethylene glycol polysodium glutamate; Carrier Excipients; Carrier Excipients. Grade: Pharmceutical Excipients. | |
| METHYL 2-OCTYNOATE | METHYL 2-OCTYNOATE. Synonyms: TIMTEC-BB SBB009081;2-OCTYNOIC ACID METHYL ESTER;Methyl 2-octinate;Methyl 2-octynate;Methyl hept-1-yne-1-carboxylate;Methyl heptyne carbonate;methyl2-oct;methyl2-octinate. CAS No. 111-12-6. Pack Sizes: 1 kg. Product ID: CDF4-0067. Molecular formula: C9H14O2. Category: Flavor Enhancers. Product Keywords: Food Ingredients; Flavor Enhancers; METHYL 2-OCTYNOATE; CDF4-0067; 111-12-6; C9H14O2; 203-836-6; 111-12-6. Purity: 0.99. Color: Clear Colourless. EC Number: 203-836-6. Physical State: Neat. Solubility: Chloroform (Slightly), Methanol (Slightly). Storage: -20°C. Boiling Point: 217-220 °C(lit.). Density: 0.92 g/mL at 25 °C(lit.). | |
| Methyl 3,4,5-Trimethoxy Benzoate | Methyl 3,4,5-Trimethoxy Benzoate. CAS No. 1916-07-0. Product ID: PE-0104. Category: Antioxidants. Product Keywords: Pharmaceutical Excipients; Injections & Sterile Formulation; Antioxidants; Methyl 3,4,5-Trimethoxy Benzoate; PE-0104; 1916-07-0; 1916-07-0. Grade: Pharmaceutical Grade. | |
| Methyl 4-Hydroxybenzoate Sodium salt | Methyl 4-Hydroxybenzoate Sodium salt. Synonyms: sodium,4-methoxycarbonylphenolate;Methyl 4-hydroxybenzoate,sodium salt;Sodium methyl 4-hydroxybenzoate;Sodium 4-(methoxycarbonyl)phenolate; Methylis parahydroxybenzoas natricum. CAS No. 5026-62-0. Product ID: CDC10-0368. Molecular formula: C8H7NaO3. Category: Cosmetic Preservatives. Product Keywords: Cosmetic Ingredients; Cosmetic Preservatives; Methyl 4-Hydroxybenzoate Sodium salt; CDC10-0368; 5026-62-0; C8H7NaO3; sodium,4-methoxycarbonylphenolate; Methyl 4-hydroxybenzoate,sodium salt; Sodium methyl 4-hydroxybenzoate; Sodium 4-(methoxycarbonyl)phenolate; Methylis parahydroxybenzoas natricum; MFCD00016470; 5026-62-0. Color: White. Physical State: Powder. Solubility: Freely soluble in water, sparingly soluble in ethanol (96 per cent), practically insoluble in methylene chloride. Quality Level: 200. Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture. Boiling Point: 265.5ºC at 760 mmHg. Melting Point: >125ºC. Product Description: Solparol (sodium methyl para-hydroxybenzoate) is a compound with formula Na(CH3(C6H4COO)O). It is the sodium salt of methylparaben.It is a food additive with the E number E219 which is used as a preservative. | |
| Methyl-β-cyclodextrin | Methyl-β-cyclodextrin. CAS No. 128446-36-6. Product ID: CDC10-0113. Molecular formula: C54H94O35. Category: Cosmetic Chelating Chemicals. Product Keywords: Cosmetic Ingredients; Cosmetic Chelating Chemicals; Methyl-β-cyclodextrin; CDC10-0113; 128446-36-6; C54H94O35; 128446-36-6. Color: White to off-white. Physical State: Powder. Solubility: H2O: 50 mg/mL. Quality Level: 300. Storage: room temp. Melting Point: 180-182 °C (lit.). Product Description: Methyl-β-cyclodextrin is a heptasaccharide, soluble in water, and has more affinity to cholesterol due to the presence of hydrophobic core. Cyclodextrins are cyclic oligosaccharides consisting of 6, 7, or 8 glucopyranose units, usually referred to as α-, β-, or γ-cyclodextrins, respectively. These compounds have rigid doughnut-shaped structures making them natural complexing agents. The unique structures of these compounds owe their stability to intramolecular hydrogen bonding between the C2- and C3-hydroxyl groups of neighboring glucopyranose units. The molecule takes on the shape of a torus with the C2- and C3-hydroxyls located around the larger opening and the more reactive C6-hydroxyl aligned around the smaller opening. The arrangement of C6-hydroxyls opposite the hydrogen bonded C2- and C3-hydroxyls forces the oxygen bonds into close proximity within the cavity, leading to an electron rich, hydrophobic interior. The size of | |
| Methyl Beta Cyclodextrin | Methyl Beta Cyclodextrin. Product ID: PE-0019. Molecular formula: C42H70-NO35·(CH3)n. Category: Emulsifier Excipients. Product Keywords: Pharmaceutical Excipients; Emulsifier Excipients; Methyl Beta Cyclodextrin; PE-0019; C42H70-NO35·(CH3)n. Appearance: White powder. Sample Provided: Yes. Standard: In-house standard. Grade: Enterprise grade. Purity: ≥98%. Solubility: Very soluble in water and methanol,easily soluble in ethanol and ethylene glycol,almost insoluble in cyclohexane and ethyl acetate. | |
| Methylcellulose | Methylcellulose occurs as a white, fibrous powder or granules. It is practically odorless and tasteless. It should be labeled to indicate its viscosity type (viscosity of a 1 in 50 solution). Synonyms: Benecel; Cellacol; Culminal MC; E461; Mapolose; Methocel; methylcellulosum; Metolose; Tylose; Viscol. CAS No. 9004-67-5. Product ID: PE-0457. Category: Coating Agents; Emulsifying Agents; Suspending Agents; Tablet and Capsule Disintegrant; Tablet Binder; Viscosity-increasing Agents. Product Keywords: Binder Excipients; Suspending Agents; Emulsifier Excipients; ; PE-0457; Methylcellulose; Coating Agents; Emulsifying Agents; Suspending Agents; Tablet and Capsule Disintegrant; Tablet Binder; Viscosity-increasing Agents; ; 9004-67-5. UNII: NA. Chemical Name: Cellulose methyl ether. Grade: Pharmceutical Excipients. Administration route: Sublingual; IM; intrasynovial; nasal; ophthalmic; oral ; topical and vaginal. Dosage Form: Sublingual tablets; IM injections; intrasynovial injections; nasal preparations; ophthalmic preparations; oral capsules, oral suspensions, and oral tablets; topical and vaginal preparations. Stability and Storage Conditions: Methylcellulose powder is stable, although slightly hygroscopic. The bulk material should be stored in an airtight container in a cool, dry place. Solutions of methylcellulose are stable to alkalis and dilute acids at pH 3-11, at room temperature. At pH less than 3, acid-catalyze | |
| Methyl cellulose | Methyl cellulose (or methylcellulose) is a chemical compound derived from cellulose. It is a hydrophilic White powder in pure form and dissolves in cold (but not in hot) water, forming a clear viscous solution or gel. It is sold under a variety of trade names and is used as a thickener and emulsifier in various food and cosmetic products, and also as a treatment of constipation. Like cellulose, it is not digestible, not toxic, and not an allergen. CAS No. 9004-67-5. Product ID: PE-0071. Molecular formula: C29H54O16. Mole weight: 658.729. Category: Suspending Agents. Product Keywords: Pharmaceutical Excipients; Liquid Dosage Form; Suspending Agents; Methyl cellulose; PE-0071; C29H54O16; 9004-67-5; 9004-67-5. EC Number: 618-391-7. | |
| Methyl cellulose | Methyl cellulose (or methylcellulose) is a chemical compound derived from cellulose. It is a hydrophilic White powder in pure form and dissolves in cold (but not in hot) water, forming a clear viscous solution or gel. It is sold under a variety of trade names and is used as a thickener and emulsifier in various food and cosmetic products, and also as a treatment of constipation. Like cellulose, it is not digestible, not toxic, and not an allergen. CAS No. 9004-67-5. Product ID: PE-0144. Molecular formula: C29H54O16. Mole weight: 658.729. Category: Binder Excipients. Product Keywords: Pharmaceutical Excipients; Solid Dosage Form; Binder Excipients; Methyl cellulose; PE-0144; C29H54O16; 9004-67-5; 9004-67-5. EC Number: 618-391-7. | |
| Methyl cellulose | Methyl cellulose (or methylcellulose) is a chemical compound derived from cellulose. It is a hydrophilic White powder in pure form and dissolves in cold (but not in hot) water, forming a clear viscous solution or gel. It is sold under a variety of trade names and is used as a thickener and emulsifier in various food and cosmetic products, and also as a treatment of constipation. Like cellulose, it is not digestible, not toxic, and not an allergen. CAS No. 9004-67-5. Product ID: PE-0222. Molecular formula: C29H54O16. Mole weight: 658.729. Category: Disintegrants Excipients. Product Keywords: Pharmaceutical Excipients; Solid Dosage Form; Disintegrants Excipients; Other Disintegrants; Methyl cellulose; PE-0222; C29H54O16; 9004-67-5; 9004-67-5. EC Number: 618-391-7. | |
| Methyl Cyclodextrin ; beta-Cyclodextrin methylether | Methyl Cyclodextrin ; beta-Cyclodextrin methylether. Synonyms: MBC; BETA-CYD; BETA-W7 M18; METHYL B-CYCLODEXTRIN; METHYL-SS-CYCLODEXTRIN; Dimethyl-β-Cyclodextrin; METHYL-BETA-CYCLODEXTRIN; B-Cyclodextrin methyl ether; beta-cyclodextrin, methylethers. CAS No. 128446-36-6. Product ID: PE-0588. Molecular formula: C54H94O35. Mole weight: 1303.3. Category: Solubilizing Agents. Product Keywords: Excipients for Liquid Dosage Form; Solubilizer Excipients; PE-0588; Methyl Cyclodextrin ; beta-Cyclodextrin methylether; Solubilizing Agents; C54H94O35; 128446-36-6. UNII: NA. Grade: Pharmceutical Excipients. Source and Preparation: In this paper, methyl-β-cyclodextrin was prepared by using dimethyl sulfate as alkylation reagent. Add 2g sodium hydroxide and 30mL deionized water to a triangular bottle, then add 10g β-cyclodextrin, stir to dissolve. At room temperature, 5mL dimethyl sulfate was slowly added and stirred at the same time. The reaction was heated in a water bath at about 60 °C for 8h. After the reaction, it was cooled and adjusted to neutral with dilute hydrochloric acid. The collection liquid was distilled under vacuum pressure, concentrated to syrupy form, and slowly dropped into 40mL acetone. The product was dispersed into a powdery solid in the acetone. The acetone was filtered out and the product was vacuum dried. Applications: Widely used in pharmaceutical, food, | |
| Methyl Gallate | Methyl Gallate. CAS No. 99-24-1. Product ID: PE-0101. Category: Antioxidants. Product Keywords: Pharmaceutical Excipients; Injections & Sterile Formulation; Antioxidants; Methyl Gallate; PE-0101; 99-24-1; 99-24-1. Grade: Pharmaceutical Grade. | |
| METHYL IONONE GAMMA | METHYL IONONE GAMMA. Synonyms: METHYL IONONE GAMMA;GAMMA-METHYLIONONE;FEMA 2711-2-3;ISORALDEINE 70;Alpha-n-predominant);Methylionone (Alpha,Beta- mixture;alpha-,beta-mixture;alpha-n-predominantly. CAS No. 1322-70-9. Product ID: CDF4-0080. Molecular formula: C14H22O. Category: Flavor Enhancers. Product Keywords: Food Ingredients; Flavor Enhancers; METHYL IONONE GAMMA; CDF4-0080; 1322-70-9; C14H22O; 1322-70-9. Purity: 0.99. Density: 0.93 g/cm3. | |
| Methylisothiazolinone | Methylisothiazolinone. Synonyms: 2-Methyl-3(2H)-isothiazolone. CAS No. 2682-20-4. Pack Sizes: 25 kg. Product ID: CDC10-0362. Molecular formula: C4H5NOS. Category: Cosmetic Preservatives. Product Keywords: Cosmetic Ingredients; Cosmetic Preservatives; Methylisothiazolinone; CDC10-0362; 2682-20-4; C4H5NOS; 2-Methyl-3(2H)-isothiazolone; 220-239-6; MFCD01742315; 2682-20-4. Purity: 0.98. Color: White to yellow. EC Number: 220-239-6. Physical State: Powder. Quality Level: 100. Boiling Point: 182.8°C at 760 mmHg. Melting Point: 254-256°C. Density: 1.25 g/cm3(14% aq.). | |
| Methyl Salicylate | Methyl Salicylate. Synonyms: Witergreen oil; hydroxybenzoicacid methyl mster; methylis salicylas. CAS No. 119-36-8. Product ID: PE-0425. Molecular formula: C8H8O3. Mole weight: 152.15. Category: Flavoring agent. Product Keywords: Pharmaceutical Excipients; Excipients for Liquid Dosage Form; Methyl Salicylate; Corrective Agents; Flavoring agent; C8H8O3; 119-36-8; 119-36-8. UNII: LAV5U5022Y. Chemical Name: Benzoic acid, 2-hydroxy-, methyl ester. Grade: Pharmceutical Excipients. Administration route: Oral, general external, dental external use. Dosage Form: Capsule, topical preparation. Stability and Storage Conditions: Store in an airtight container away from light. Source and Preparation: This product is derived from the skin of Betululenla and the leaves of Gaultheria procumbens. The product is made of salicylic acid and methanol as raw materials, esterified by concentrated sulfuric acid, neutralized by alkali, and distilled. This product indicates the climate, winter for green, so called winter green oil. Applications: Flavoring agent; An odorant; Preservatives In addition to clinically used as analgesic, anti-inflammatory, fungicide, as pharmaceutical additives are used as flavor correction agent, fragrance agent, preservative, often used in ointment, paste, lotion and other manufacturing. In addition, this product is also widely used in food, cosmetics and flavor industries. Safety: This product is mainly for | |
| Methyl sorbate | Methyl sorbate. Synonyms: Methyl (2E,4E)-hexa-2,4-dienoate;(2E,4E)-2,4-Hexadienoic acid methyl ester;METHYL 2,4-HEXADIENOATE;METHYL T2 T4 HEXADIENOATE;METHYL SORBATE;FEMA 3714;2,4-HEXADIENOIC ACID METHYL ESTER;SORBIC ACID METHYL ESTER. CAS No. 689-89-4. Product ID: CDF4-0125. Molecular formula: C7H10O2. Category: Food Preservatives. Product Keywords: Food Ingredients; Food Preservatives; Methyl sorbate; CDF4-0125; 689-89-4; C7H10O2; 211-712-8; 689-89-4. Purity: 0.99. EC Number: 211-712-8. Application: Food preservative. Boiling Point: 180 °C(lit.). Melting Point: 15°C. Density: 0.968 g/mL at 25 °C(lit.). | |
| METHYL SORBATE | METHYL SORBATE. Synonyms: METHYL T2 T4 HEXADIENOATE;2,4-HEXADIENOIC ACID METHYL ESTER;METHYL 2,4-HEXADIENOATE;FEMA 3714;SORBIC ACID METHYL ESTER;methyl hexa-2,4-dienoate;2,4-Hexadienoic acid methyl;Hexa-2,4-dienoic acid methyl ester. CAS No. 1515-80-6. Product ID: CDF4-0117. Molecular formula: C7H10O2. Category: Food Preservatives. Product Keywords: Food Ingredients; Food Preservatives; METHYL SORBATE; CDF4-0117; 1515-80-6; C7H10O2; 216-160-1; 1515-80-6. Purity: 0.98. Color: Colourless. EC Number: 216-160-1. Physical State: Oil. Solubility: Chloroform (Sparingly), Ethyl Acetate, Methanol (Slightly). Storage: Amber Vial, Refrigerator. Boiling Point: 180 °C(lit.). Melting Point: 8°C. | |
| Metronidazole | Metronidazole is an antibiotic and antiprotozoal medication. CAS No. 443-48-1. Product ID: PAP-0044. Molecular formula: C6H9N3O3. Category: Antibacterial, anti-inflammatory and antiviral. Product Keywords: Antibacterial, Anti-inflammatory and Antiviral Series; Metronidazole; PAP-0044; Antibacterial, anti-inflammatory and antiviral; C6H9N3O3; 443-48-1. Standard: CP/EP/BP/USP. Color: white to light yellow. EC Number: 207-136-1. Physical State: crystalline. Solubility: acetic acid: 0.1 M, clear, faintly yellow. Storage: 2-8°C. Boiling Point: 301.12°C (rough estimate). Melting Point: 159-161 °C (lit.). Density: 1.3994 (rough estimate). | |
| Microcrystalline Cellulose | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH; Celex; cellulose-gel; Celphere; Ceolus-KG; crystalline-cellulose; E460; Emcocel; Ethispheres; Fibrocel; Pharmacel; Tabulose; Vivapur. CAS No. 9004-34-6. Product ID: PE-0230. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbents; Anti-adhesives; Binders or diluents. Product Keywords: Diluent Excipients; Suspending Agents; PE-0230; Microcrystalline Cellulose; Adsorbents; Anti-adhesives; Binders or diluents; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose. Grade: Pharmceutical Excipients. Administration route: Intra-articular injection, intramuscular injection, intravenous injection, intravitreal implant, nasal spray, or oral administration. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled hydrolysis of α-cellulose with dilute mine | |
| Microcrystalline Cellulose and Carmellose Sodium | Custom. Product ID: PE-0446. Category: Dispersant; Emulsion Stabilizer; Stabilizer; Suspension Agents; Thickener. Product Keywords: Dispersion Excipients; Stabilizers; PE-0446; Microcrystalline Cellulose and Carmellose Sodium; Dispersant; Emulsion Stabilizer; Stabilizer; Suspension Agents; Thickener; /; /. UNII: NA. Chemical Name: Microcrystalline cellulose-carboxymethylcellulose sodium (medicinal excipients). Grade: Pharmceutical Excipients. Applications: It is commonly used in medicinal suspension, emulsion, nasal spray and cream, and can also be used as a thickener and stabilizer of ready-to-use and resoluble suspension, emulsion and spray. | |
| Microcrystalline Cellulose PH101 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 101; Celex PH101; cellulose-gel PH101; Celphere PH101; Ceolus-KG PH101; crystalline-cellulose PH101; E460 PH101; Emcocel PH101; Ethispheres PH101; Fibrocel PH101; Pharmacel PH101; Tabulose PH101; Vivapur PH101. CAS No. 9004-34-6. Product ID: PE0368. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for Tablets and Capsules. Product Keywords: Suspending Agents; Adsorbents; PE0368; Microcrystalline Cellulose PH101; Adsorbent; Suspending Agents; Diluent for Tablets and Capsules; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH101. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled hydrolysis of α-cellulose with dilute mineral a | |
| Microcrystalline Cellulose PH102 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 102; Celex PH102; cellulose-gel PH102; Celphere PH102; Ceolus-KG PH102; crystalline-cellulose PH102; E460 PH102; Emcocel PH102; Ethispheres PH102; Fibrocel PH102; Pharmacel PH102; Tabulose PH102; Vivapur PH102. CAS No. 9004-34-6. Product ID: PE0369. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for Tablets and Capsules. Product Keywords: Suspending Agents; Adsorbents; PE0369; Microcrystalline Cellulose PH102; Adsorbent; Suspending Agents; Diluent for Tablets and Capsules; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH102. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled hydrolysis of α-cellulose with dilute mineral a | |
| Microcrystalline Cellulose PH103 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 103; Celex PH103; cellulose-gel PH103; Celphere PH103; Ceolus-KG PH103; crystalline-cellulose PH103; E460 PH103; Emcocel PH103; Ethispheres PH103; Fibrocel PH103; Pharmacel PH103; Tabulose PH103; Vivapur PH103. CAS No. 9004-34-6. Product ID: PE0370. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets. Product Keywords: Suspending Agents; Adsorbents; PE0370; Microcrystalline Cellulose PH103; Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH103. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled h | |
| Microcrystalline Cellulose PH105 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 105; Celex PH105; cellulose-gel PH105; Celphere PH105; Ceolus-KG PH105; crystalline-cellulose PH105; E460 PH105; Emcocel PH105; Ethispheres PH105; Fibrocel PH105; Pharmacel PH105; Tabulose PH105; Vivapur PH105. CAS No. 9004-34-6. Product ID: PE0371. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets. Product Keywords: Suspending Agents; Adsorbents; PE0371; Microcrystalline Cellulose PH105; Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH105. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled h | |
| Microcrystalline Cellulose PH112 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 112; Celex PH112; cellulose-gel PH112; Celphere PH112; Ceolus-KG PH112; crystalline-cellulose PH112; E460 PH112; Emcocel PH112; Ethispheres PH112; Fibrocel PH112; Pharmacel PH112; Tabulose PH112; Vivapur PH112. CAS No. 9004-34-6. Product ID: PE0372. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets. Product Keywords: Suspending Agents; Adsorbents; PE0372; Microcrystalline Cellulose PH112; Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH112. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled h | |
| Microcrystalline Cellulose PH113 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 113; Celex PH113; cellulose-gel PH113; Celphere PH113; Ceolus-KG PH113; crystalline-cellulose PH113; E460 PH113; Emcocel PH113; Ethispheres PH113; Fibrocel PH113; Pharmacel PH113; Tabulose PH113; Vivapur PH113. CAS No. 9004-34-6. Product ID: PE0373. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets. Product Keywords: Suspending Agents; Adsorbents; PE0373; Microcrystalline Cellulose PH113; Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH113. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled h | |
| Microcrystalline Cellulose PH200 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 200; Celex PH200; cellulose-gel PH200; Celphere PH200; Ceolus-KG PH200; crystalline-cellulose PH200; E460 PH200; Emcocel PH200; Ethispheres PH200; Fibrocel PH200; Pharmacel PH200; Tabulose PH200; Vivapur PH200. CAS No. 9004-34-6. Product ID: PE0374. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets. Product Keywords: Suspending Agents; Adsorbents; PE0374; Microcrystalline Cellulose PH200; Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH200. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled h | |
| Microcrystalline Cellulose PH301 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 301; Celex PH301; cellulose-gel PH301; Celphere PH301; Ceolus-KG PH301; crystalline-cellulose PH301; E460 PH301; Emcocel PH301; Ethispheres PH301; Fibrocel PH301; Pharmacel PH301; Tabulose PH301; Vivapur PH301. CAS No. 9004-34-6. Product ID: PE0375. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets. Product Keywords: Suspending Agents; Adsorbents; PE0375; Microcrystalline Cellulose PH301; Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH301. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled h | |
| Microcrystalline Cellulose PH302 | Microcrystalline cellulose is a purified, partially depolymerized cellulose that occurs as a white, odorless, tasteless, crystalline powder composed of porous particles. It is commercially available in different particle sizes and moisture grades that have different properties and applications. Synonyms: Avicel PH 302; Celex PH302; cellulose-gel PH302; Celphere PH302; Ceolus-KG PH302; crystalline-cellulose PH302; E460 PH302; Emcocel PH302; Ethispheres PH302; Fibrocel PH302; Pharmacel PH302; Tabulose PH302; Vivapur PH302. CAS No. 9004-34-6. Product ID: PE0376. Molecular formula: (C6H10O5)n n n?220. Mole weight: ?36000. Category: Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets. Product Keywords: Suspending Agents; Adsorbents; PE0376; Microcrystalline Cellulose PH302; Adsorbent; Suspending Agents; Diluent for tablets and capsules; Disintegrant for tablets; (C6H10O5)n n n?220; 9004-34-6. UNII: OP1R32D61U. Chemical Name: Cellulose PH302. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Inhalation; Oral Capsule; Granules; Suspension; Syrup; Tablet; Topical and Vaginal. Stability and Storage Conditions: This product is a hygroscopic, but stable substance. Large quantities of storage must be placed in airtight containers in a cool and dry environment. Source and Preparation: Microcrystalline cellulose can be obtained by controlled h | |
| Microencapsulated Ferrric Pyrophosphate | Ferric pyrophosphate is an iron replacement product. Free iron presents several side effects as it can catalyze free radical formation and lipid peroxidation as well as the presence of interactions of iron in plasma. The ferric ion is strongly complexed by pyrophosphate.1 It presents an increasing interest as this insoluble form can be milder in the gastrointestinal tract and present higher bioavailability. Synonyms: Iron Pyrophosphate. Product ID: CDF4-0257. Molecular formula: Fe4O21P6. Mole weight: 745.21. Category: Mineral, Supplement. Product Keywords: Nutrients; CDF4-0257; Microencapsulated Ferrric Pyrophosphate; Iron Pyrophosphate. Chemical Name: Ferric pyrophosphate. Grade: Food grade. Applications: Agriculture & Feed Animal Health & Nutrition. Aquaculture,Other Animal Health & Nutrition, Ruminants,Swine. Food & Nutrition Beverage. Energy Drinks,Juice & Juice Drinks,Other Non-Alcoholic Beverages,Sports Drinks,Tea, Cocoa & Coffee. Food & Nutrition Food. Bakery,Cereals & Snacks,Dairy,Desserts & Fruit Preparations,Infant & Baby Food,Savory & Culinary. Food & Nutrition Nutrition & Well Being. Nutraceuticals & Supplements. | |
| milrinone | Milrinone is a medication indicated for cardiac support in patients with acute heart failure, pulmonary hypertension, or chronic heart failure. It improves cardiac contractility (inotropy) and cardiac relaxation (lusitropy) and induces vasodilation. CAS No. 78415-72-2. Product ID: PAP-0101. Molecular formula: C12H9N3O. Mole weight: 211.224. Product Keywords: Cardiovascular Series; PAP-0101; milrinone; 78415-72-2. Chemical Name: 2-Methyl-6-oxo-1,6-dihydro-3,4'-bipyridine-5-carbonitrile. Grade: Pharmaceutical grade. Applications: Milrinone is a commonly used therapy for severe pulmonary arterial hypertension (PAH),often in combination with other medications such as sildenafil.Targeting PDE3 with optimal doses and timing, milrinone prevents allergic inflammation in HDM-driven models of allergic airway inflammation. It can be used in cardiopulmonary bypass cases, as it increases the flow in saphenous grafts and has a beneficiary effect in left ventricle function. | |
| Mineral oil | Mineral oil. Synonyms: LIQUID PETROLATUM;Mineral oil Petrolatum liquid White mineral oil Paraffin oil;Blank Sulfur Oil Standard in Base Oil, For Diesel Fuel Analysis;Density Standard 870 kg/m3 ;Mineral oil suitable for preparation of Nujol mulls for infrared spectroscopy, light oil;B-LUFA LC ELUENT;C-LUFA BUFFER LC ELUENT;Parol 70. CAS No. 8042-47-5. Pack Sizes: 100 g. Product ID: CDF4-0009. Molecular formula: N/A. Category: Coating Agents. Product Keywords: Food Ingredients; Coating Agents; Mineral oil; CDF4-0009; 8042-47-5; 232-455-8; 8042-47-5. Purity: 0.99. Color: White. EC Number: 232-455-8. Physical State: Oil. Storage: room temp. Density: 0.85 g/mL at 20 °C. | |
| Mineral Oil and Lanolin Alcohols | Mineral Oil and Lanolin Alcohols. Product ID: PE-0548. Category: Emollient; Emulsifier; Plasticizer. Product Keywords: Excipients for Liquid Dosage Form; Emulsifier Excipients; PE-0548; Mineral Oil and Lanolin Alcohols; Emollient; Emulsifier; Plasticizer;. UNII: NA. Chemical Name: Mineral oil ; Lanolin alcohols. Grade: Pharmceutical Excipients. Administration route: Topical. Dosage Form: Topical preparations. Stability and Storage Conditions: This product is stable, should be placed in a closed container, stored in a cool, dry place. Source and Preparation: It can be prepared by dissolving lanolin alcohol in liquid paraffin. Applications: This product is oil-like liquid, used in local preparations; In cosmetics, they are used as emulsifiers because of their moisturizing properties. In the preparation of oil-in-water cream and lotion, it is mainly used as emulsifier. In addition, it can also play the role of auxiliary emulsifier and stabilizer. | |
| Minocycline hydrochloride | Minocycline hydrochloride is a new semi-synthetic tetracycline with high efficiency, fast acting and long acting, and its antibacterial spectrum is similar to tetracycline. Staphylococcus aureus, Streptococcus and Chemicalbook Escherichia coli resistant to tetracycline are still sensitive to this product. It is mainly used for urinary tract infection, gastrointestinal infection, gynecological infection, pyoderma, eye, ear, nose and throat infection, osteomyelitis and so on. Synonyms: KlinoMycin, Minocyclinechloride , MinoMycin, NSC141993; (4S, 4aS, 5aR, 12aS) -4, 7-Bis (di methyl aMino) -3, 10, 12, 12a-tetrahydroxy-1, 11-dioxo-1, 4, 4a, 5, 5a, 6, 11, 12a-octahydrotetracene -2-carboxaMide hydrochloride ; 2-Naphthacene carboxamide , 4, 7-bis (di methyl amino) -1, 4, 4a, 5, 5a, 6, 11, 12a-octahydro-3, 10, 12, 12a-tetrahydroxy-1, 11-dioxo-, hydrochloride (1: 1) , (4S, 4aS, 5aR, 12aS) -; MinocycliChemicalbooknehydrochloride Solution, 100ppm. CAS No. 13614-98-7. Product ID: PAP-0060. Molecular formula: C23H28ClN3O7. Category: Anti-Infectives. Product Keywords: Antibacterial, Anti-inflammatory and Antiviral Series; Minocycline hydrochloride; PAP-0060; Anti-Infectives; C23H28ClN3O7; 13614-98-7. Appearance: Crystalline. Standard: EP/IP/JP. Chemical Name: (4S,4aS,5aR,12aS)-4,7-Bis(diMethylaMino)-3,10,12,12a-tetrahydroxy-1,11-dioxo-1,4,4a,5,5a,6,11,12a-octahydrotetracene-2-carboxaMide hydrochloride. Grade: Pharmaceutical Grade. Solubility: Sparingly soluble in water, slightl | |
| Mixed tocopherol microencapsulated powder | Mixed tocopherol microencapsulated powder. Product ID: CDF4-0195. Molecular formula: NA. Category: Antioxidant; nutrient supplements. Product Keywords: Food Ingredients; Nutrients; CDF4-0195; Mixed tocopherol microencapsulated powder; Antioxidant; nutrient supplements. Appearance: light yellow powder. Color: light yellow. Physical State: powder. Applications: Dietary supplements, nutritional supplements, cosmetic raw materials, etc. | |
| MOC-L-Tert-Leucine | MOC-L-Tert-Leucine is used as a pharmaceutical intermediate for the synthesis of drugs such as Atazanavir. CAS No. 162537-11-3. Product ID: PAP-0021. Molecular formula: C8H15NO4. Category: Amino acid. Product Keywords: Amino Acid Series; MOC-L-Tert-Leucine; PAP-0021; Amino acid; C8H15NO4; 162537-11-3. EC Number: 431-620-3. Physical State: powder. Solubility: Soluble in ethyl acetate and methanol. Storage: 2-8°C. Boiling Point: 320.9±25.0 °C(Predicted). Melting Point: 109°C. Density: 1.126±0.06 g/cm3(Predicted). | |
| MOC-L-Valine | MOC-L-valine (S)-2-((methoxycarbonyl) amino)-3-methylbutyric acid, a key synthetic intermediate of ledipasvir, is indicated for the treatment of chronic hepatitis C Virus (HCV) infection in adults and adolescents aged 12 to <18 years. CAS No. 74761-42-5. Product ID: PAP-0015. Molecular formula: C7H13NO4. Category: Amino acid. Product Keywords: Amino Acid Series; MOC-L-Valine; PAP-0015; Amino acid; C7H13NO4; 74761-42-5. Color: White to Almost white. Physical State: powder to crystal. Storage: Sealed in dry,Room Temperature. Applications: Moc-l-valine, also known as (S)-2-((methoxycarbonyl) amino) -3-methylbutyric acid, is a key synthetic intermediate for the treatment of chronic hepatitis C virus (HCV) infection in adults and adolescents aged 12 to <18 years. Boiling Point: 315.9±25.0 °C(Predicted). Melting Point: 109.0 to 113.0 °C. Density: 1.154±0.06 g/cm3(Predicted). Product Description: Moc-l-valine, also known as (S)-2-((methoxycarbonyl) amino) -3-methylbutyric acid, is a key synthetic intermediate for the treatment of chronic hepatitis C virus (HCV) infection in adults and adolescents aged 12 to <18 years. | |
| Modified Starches | Modified Starches. CAS No. 68412-35-1. Product ID: PE-0339. Category: Excipients. Product Keywords: Pharmaceutical Excipients; Excipients; Modified Starches; PE-0339; 68412-35-1; 68412-35-1. Standard: In-house standard. Grade: Pharmaceutical grade. | |
| Mogroside V | Mogroside V. Synonyms: (24R)-3β-[6-O-(β-D-Glucopyranosyl)-β-D-glucopyranosyloxy]-24-[2-O,6-O-bis(β-D-glucopyranosyl)-β-D-glucopyranosyloxy]cucurbit-5-ene-11α,25-diol;beta-D-Glucopyranoside, (3beta,9beta,10alpha,11alpha,24R)-3-((6-o-beta-D-glucopyranosyl-beta-D-glucopyranosyl)oxy)-11,25-dihydroxy-9-methyl-19-norlanost-5-en-24-yl o-beta-D-glucopyranosyl-(1-2)-o-(beta-D-glucopyranosyl-(1-6))-;Mogrol-3-o-(beta-D-glucopyranosyl (1-6)-beta-D-glucopyranoside)-24-o-((beta-D-glucopyranosyl (1-2))-(beta-D-glucopyranosyl(1-6))-beta-D-glucopyranoside). CAS No. 88901-36-4. Pack Sizes: 1 g. Product ID: CDF4-0164. Molecular formula: C60H102O29. Category: Sweeteners. Product Keywords: Food Ingredients; Sweeteners; Mogroside V; CDF4-0164; 88901-36-4; C60H102O29; 695-005-3; 88901-36-4. Purity: 0.98. Color: White to Off-White. EC Number: 695-005-3. Physical State: Solid. Solubility: Methanol (Slightly, Sonicated), Pyrindine (Slightly), Water (Slightly). Storage: 2-8°C. Melting Point: 197~201°C. Density: 1.51 g/mL. Product Description: This substance is a primary reference substance with assigned absolute purity (considering chromatographic purity, water, residual solvents, inorganic impurities). The exact value can be found on the certificate. | |
| MOLECULAR SIEVE | MOLECULAR SIEVE. Synonyms: SODIUM ALUMINIUM SILICATE;SODIUM ALUMINOSILICATE;SODIUM ALUMINUM SILICATE;P 820 A;MOLECULAR SIEVE, TYPE Y, AMMONIUM ION;MOLECULAR SIEVE, TYPE 5A, 8-12 MESH BEADS;MOLECULAR SIEVE, TYPE 5A;aluminosilicicacid,sodiumsalt. CAS No. 1344-00-9. Product ID: CDF4-0007. Molecular formula: AlNaO6Si2. Category: Anticaking Agents. Product Keywords: Food Ingredients; Anticaking Agents; MOLECULAR SIEVE; CDF4-0007; 1344-00-9; AlNaO6Si2; 215-684-8; 1344-00-9. Purity: 0.99. EC Number: 215-684-8. Physical State: Powder. Density: 2.05[at 20°C]. Product Description: Fine white powder. Many ordinary rocks (feldspars) are aluminosilicates. Aluminosilicates with more open three-dimensional structures than the feldspars are called zeolites. The openings in zeolites appear as polyhedral cavities connected by tunnels. Zeolites act as catalysts by absorbing small molecules in their interior cavities and holding them in proximity so that reaction among them occurs sooner. | |
| MOLECULAR SIEVES | MOLECULAR SIEVES. Synonyms: CALCIUM ALUMINOSILICATE; silicatecement; silicicacid, aluminumcalciumsalt; SODIUM ALUMINO-SILICATE;POTASSIUM ALUMINOSILICATE;MOLECULAR SIEVE TYPE AW-300;MOLECULAR SIEVE TYPE 5A;MOLECULAR SIEVE TYPE 4A. CAS No. 1327-39-5. Pack Sizes: 1 g, 10 g, 100g. Product ID: CDF4-0008. Molecular formula: Al2Ca2O15Si5. Category: Anticaking Agents. Product Keywords: Food Ingredients; Anticaking Agents; MOLECULAR SIEVES; CDF4-0008; 1327-39-5; Al2Ca2O15Si5; 215-476-7; 1327-39-5. Purity: 0.99. EC Number: 215-476-7. Physical State: Rod. Application: MOLECULAR SIEVES is an anticaking agent used in vanilla powder. It is also used in salt up to 2%. Melting Point: 1500°C [CRC10]. Density: 3.048 g/mL. Product Description: MOLECULAR SIEVES is Irregular shaped grey colored rocks. | |
| Mometasone Furoate | Mometasone furoate is a half-synthetic glucocorticoid, which has anti-inflammatory, anti-allergic, vasoconstriction, reduced vascular permeability, inhibition of cell division and antipruritus effects. It is characterized by increased intensity of action and disproportionate increase in side effects, and is used only once a day. Mometasone furoate is effective for corticosteroid treatment of skin diseases, such as neurodermatitis, eczema, atopic dermatitis, seborrheic dermatitis and seborrheic dermatitis. CAS No. 83919-23-7. Product ID: PAP-0082. Molecular formula: C27H30Cl2O6. Category: Hormone drug. Product Keywords: Hormone Series; Mometasone Furoate; PAP-0082; Hormone drug; C27H30Cl2O6; 83919-23-7. Appearance: Powder. Standard: USP. Color: White to Off-White. Physical State: neat. Solubility: DMSO: ≥20mg/mL. Storage: 2-8°C. Applications: Mometasone furoate is used for skin diseases effective in the treatment of corticosteroids, such as neurodermatitis, eczema, atopic dermatitis caused by skin inflammation and skin itching symptoms, local use of medium effect corticosteroids, anti-inflammatory, anti-itch and vasoconstriction effects. Boiling Point: 655.5±55.0 °C(Predicted). Melting Point: 218-220°C. Density: 1.37±0.1 g/cm3(Predicted). | |
| Monosodium Glutamate | Monosodium glutamate occurs as white free-flowing crystals or a crystalline powder. It is practically odorless and has a meat-like taste. Synonyms: Chinese seasoning; glutamic acid monosodium salt; glutamic acid, sodium salt; monosodium L-glutamate monohydrate; natrii glutamas; sodium L-glutamate; sodium glutamate monohydrate; sodium hydrogen L-(þ)-2-aminoglutarate monohydrate. CAS No. 142-47-2. Product ID: PE-0422. Molecular formula: C5H8NO4Na; C5H8NO4Na·H2O. Mole weight: 169.13(anhydrous); 187.13 (monohydrate). Category: Flavoring agent. Product Keywords: Pharmaceutical Excipients; Excipients for Liquid Dosage Form; Monosodium Glutamate; Corrective Agents; Flavoring agent; C5H8NO4Na; C5H8NO4Na·H2O; 142-47-2; 142-47-2. UNII: W81N5U6R6U. Chemical Name: Glutamic acid monosodium salt monohydrate. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral syrup. Stability and Storage Conditions: Aqueous solutions of monosodium glutamate may be sterilized by autoclaving. Monosodium glutamate should be stored in a tight container in a cool, dry place. Source and Preparation: Monosodium glutamate is the monosodium salt of the naturally occurring L-form of glutamic acid. It is commonly manufactured by fermentation of carbohydrate sources such as sugar beet molasses.In general, sugar beet products are used in Europe and the USA. Other carbohydrate sources such as sugar cane and tapioca are used in | |
| Montmorillonite | montmorillonite, also known as microcrystalline kaolinite or gelinite, is a silicoaluminate, which is mainly composed of octahedral montmorillonite particles. CAS No. 1318-93-0. Product ID: PAP-0091. Molecular formula: Al2O9Si3. Product Keywords: Other Active Pharmaceutical Ingredients; Montmorillonite; PAP-0091; ; Al2O9Si3; 1318-93-0. Appearance: Powder. Grade: GMP. Color: Beige to gray. Physical State: powder. Storage: Sealed in dry,Room Temperature. Applications: This product has pathogen adsorption and intestinal mucosal protection, the main use of diarrhea, through the formation of a protective film in the intestine, play a role. Melting Point: >300°C. Density: 44960. | |
| Moulded Universal Vial | Moulded Universal Vial. Product ID: PM-030. Product Keywords: Packaging Materials; Glass Packaging; PM-030; Moulded Universal Vial. | |
| Moxifloxacin HCI | Moxifloxacin hydrochloride is thus developed by Germany's bayer pharmaceutical a fluoroquinolone antibiotic medicine, action mechanism and the in vitro antibacterial spectrum similar to other fluoroquinolone drugs, but the antibacterial activity of gram positive bacteria and anaerobic bacteria and cut (trovafloChemicalbookxacin) similar characters, better than some of the old varieties. CAS No. 186826-86-8. Product ID: PAP-0064. Molecular formula: C21H25ClFN3O4. Category: Antibiotic. Product Keywords: Antibacterial, Anti-inflammatory and Antiviral Series; Moxifloxacin HCI; PAP-0064; Antibiotic; C21H25ClFN3O4; 186826-86-8. Appearance: Powder. Standard: USP/EP. Grade: CEP/ISO. Color: white to beige. Physical State: powder. Solubility: H2O: soluble5mg/mL, clear (warmed). Storage: 2-8°C. Applications: It is an antibiotic used to treat bacterial infections of the lungs, paranasal sinuses, skin and abdominal cavity in adults. Boiling Point: 636°C. Melting Point: Slightly yellow to yellow crystalline powder, mp 324-325°. | |
| mPEG2k-PLA2k-PAE9k | mPEG2k-PLA2k-PAE9k. Synonyms: methoxy polyethylene glycol-Poly(D,L-lactide)-Poly(b-amino esters). Product ID: MSMN-057. Category: Raw Materials. | |
| mPEG-AA | According to public information, mPEG-AA (mPEG-CM) is one of the excipients of Pfizer's and Moderna's COVID-19 vaccine. Product ID: PE-0343. Category: Excipients. Product Keywords: Pharmaceutical Excipients; Excipients; mPEG-AA; PE-0343. Sample Provided: Yes. Standard: In-house standard. Grade: Pharmaceutical grade. | |
| mPEG-alginate | mPEG-alginate,methoxypolyethylene glycol-alginate is an AB block copolymer,Chitosan is a Natural polysaccharide can be used for drug delivery systems. Synonyms: methoxy polyethylene glycol-alginate. Product ID: MSMN-054. Category: Raw Materials. | |
| mPEG-b-PLA (2k-5k) | mPEG-b-PLA is a biodegradable diblock copolymer. Uses: Msmn-087. Synonyms: Methoxy poly(ethylene glycol)-b-poly(D,L-lactide). Grades: Raw Materials. | |
| mPEG-b-PLA (2k-5k) | mPEG-b-PLA is a biodegradable diblock copolymer. Synonyms: Methoxy poly(ethylene glycol)-b-poly(D,L-lactide). Product ID: MSMN-087. Category: Raw Materials. | |
| mPEG-b-PLGA (PEG Mn 2,000, PLGA Mn 10,000) | mPEG-b-PLGA (PEG Mn 2,000, PLGA Mn 10,000). Synonyms: Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide). Product ID: MSMN-039. Category: Raw Materials. | |
| mPEG-b-PLGA (PEG Mn 2,000, PLGA Mn 11,500) | Amphiphilic block copolymers (AmBC) are made up of two chemically different homopolymer blocks. One of the block is hydrophilic and the other one is hydrophobic. These macromolecules have the properties to self-assemble when dissolved in an aqueous media. PEG-PLGA is one the most commonly used biodegradable amphiphilic block copolymers for drug delivery applications. PEG is the hydrophilic part and PLGA is the hydrophobic part. Synonyms: Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide). Product ID: MSMN-036. Category: Raw Materials. | |
| mPEG-b-PLGA (PEG Mn 2,000, PLGA Mn 3,000) | mPEG-b-PLGA (PEG Mn 2,000, PLGA Mn 3,000). Synonyms: Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide). Product ID: MSMN-040. Category: Raw Materials. | |
| mPEG-b-PLGA (PEG Mn 2,000; PLGA Mn 4,500) | Amphiphilic block copolymers (AmBC) are made up of two chemically different homopolymer blocks. One of the block is hydrophilic and the other one is hydrophobic. These macromolecules have the properties to self-assemble when dissolved in an aqueous media. PEG-PLGA is one the most commonly used biodegradable amphiphilic block copolymers for drug delivery applications. PEG is the hydrophilic part and PLGA is the hydrophobic part. Synonyms: Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide). Product ID: MSMN-034. Category: Raw Materials. | |
| mPEG-b-PLGA (PEG Mn 5,000, PLGA Mn 10,000) | Contains ≤500 ppm impurities by GC, including trace monomer and residual organics. Synonyms: Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide). Product ID: MSMN-042. Category: Raw Materials. | |
| mPEG-b-PLGA (PEG Mn 5,000, PLGA Mn 15,000) | Contains ≤500 ppm impurities by GC, including trace monomer and residual organics. Synonyms: Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide). Product ID: MSMN-041. Category: Raw Materials. | |
Would you like to list your products on USA Chemical Suppliers?
Our database is helping our users find suppliers everyday.