Find where to buy products from suppliers in the USA, including: distributors, industrial manufacturers in America, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the American suppliers website for prices, SDS or more information. You can also view suppliers in Australia, NZ or the UK.
| Product | Description | |
|---|---|---|
| Acrylic Resin | Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. Product ID: prop-2-enoic acid. Molecular formula: 72.06g/mol. Mole weight: C3H4O2;CH2=CHCOOH;C3H4O2. C=CC(=O)O. InChI=1S/C3H4O2/c1-2-3(4)5/h2H, 1H2, (H, 4, 5). NIXOWILDQLNWCW-UHFFFAOYSA-N. |  |
| Acrylic resin Aqueous Dispersion | Acrylic resin Aqueous Dispersion can be used in the formulation of mortars based on hydraulic binders to which it gives good mechanical resistance. |  |
| Polyacrylic Resin ? | Polyacrylic Resin ?. CAS No. 24938-16-7. Product ID: PE-0464. Molecular formula: (C29H52O6)n. Mole weight: 150000. Category: Binder Excipients. Product Keywords: Pharmaceutical Excipients; Excipients for Solid Dosage Form; Polyacrylic Resin ?; Binder Excipients; Binder Excipients; (C29H52O6)n; 24938-16-7; 24938-16-7. UNII: 905HNO1SIH. Chemical Name: Poly(butyl methacrylate, (2-dimethylaminoethyl) methacrylate, methyl methacrylate) 1 : 2 : 1. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral capsules and tablets. Stability and Storage Conditions: The polymer in dry powder state is stable at temperatures below 30°C. Above this temperature, the powder is easy to agglomerate, but this phenomenon does not affect the quality of the material, and the lumps are easy to crush. The polymer in dry powder state is stable for 3 years when stored in a sealed container at a temperature below 30°C. Aqueous dispersions are very sensitive to temperature and delamination occurs below 0°C. Therefore, the water dispersion should be transported and stored in a sealed container at a temperature of 5-25°C, and it is stable for at least 19 months after delivery from the manufacturer's warehouse. Source and Preparation: Polymerized from acrylic and methacrylic acid or their various esters. Applications: It can be used as film coating material; tablet binder; tablet diluent. Polyacrylic resins are mainly used |  |
| Polyacrylic Resin 1 | Polyacrylic Resin 1. Synonyms: Methacrylic Acid Copolymer (USP); Methacrylic Acid - Ethyl Acrylate Copolymer (1:1)(BP); Acidi methacrylici et ethylis acrylatis polymerisatum 1:1(PhEur). CAS No. 25212-88-8. Product ID: PE-0463. Molecular formula: (C17H26O8)n. Mole weight: 250000. Category: Binder Excipients. Product Keywords: Pharmaceutical Excipients; Excipients for Solid Dosage Form; Polyacrylic Resin 1; Binder Excipients; Binder Excipients; (C17H26O8)n; 25212-88-8; 25212-88-8. UNII: NX76LV5T8J. Chemical Name: Methacrylic acid/ ethyl acrylate copolymer(1:1). Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Oral capsules and tablets. Stability and Storage Conditions: The polymer in dry powder state is stable at temperatures below 30°C. Above this temperature, the powder is easy to agglomerate, but this phenomenon does not affect the quality of the material, and the lumps are easy to crush. The polymer in dry powder state is stable for 3 years when stored in a sealed container at a temperature below 30°C. Aqueous dispersions are very sensitive to temperature and delamination occurs below 0°C. Therefore, the water dispersion should be transported and stored in a sealed container at a temperature of 5-25°C, and it is stable for at least 18 months after delivery from the manufacturer's warehouse. Source and Preparation: Polymerized from acrylic and methacrylic acid or their various esters. | |
| PU type polyhydroxy acrylic resin | PU type polyhydroxy acrylic resin. Group: Polymers. | |
| Solid Acrylic Resin | It can be used for coil coating, OPP matte varnish, cosmetics, ball finish for coils, diffusion film, etc. | |
| Solid Acrylic Resin | Solid Acrylic Resin. Group: Polymers. CAS No. 25608-33-7. Product ID: butyl 2-methylprop-2-enoate; methyl 2-methylprop-2-enoate. Molecular formula: 242.31g/mol. Mole weight: C13H22O4. CCCCOC(=O)C(=C)C.CC(=C)C(=O)OC. InChI=1S/C8H14O2. C5H8O2/c1-4-5-6-10-8(9)7(2)3; 1-4(2)5(6)7-3/h2, 4-6H2, 1, 3H3; 1H2, 2-3H3. WHLPIOPUASGRQN-UHFFFAOYSA-N. | |
| Solid Acrylic Resin BM11 | Solid Acrylic Resin BM11. Group: Polymers. | |
| Solid Acrylic Resin BM24E | Solid Acrylic Resin BM24E. Group: Polymers. | |
| Solid Acrylic Resin BM44 | Solid Acrylic Resin BM44. Group: Polymers. | |
| Solid Acrylic Resin BM60 | Solid Acrylic Resin BM60. Group: Polymers. | |
| Solid Acrylic Resin BM61 | Solid Acrylic Resin BM61. Group: Polymers. | |
| Solid Acrylic Resin BM65C | Solid Acrylic Resin BM65C. Group: Polymers. | |
| Solid Acrylic Resin BM66 | Solid Acrylic Resin BM66. Group: Polymers. | |
| Solid Acrylic Resin BM66D | Solid Acrylic Resin BM66D. Group: Polymers. | |
| Solid Acrylic Resin MB-10-B | Solid Acrylic Resin MB-10-B. Group: Polymers. | |
| Solid Acrylic Resin MB-12 | Solid Acrylic Resin MB-12. Group: Polymers. | |
| Solid Acrylic Resin MB-8 | Solid Acrylic Resin MB-8. Group: Polymers. | |
| Solvent based acrylic resin | Solvent based acrylic resin. Group: Polymers. | |
| Thermoplastic acrylic resin | Thermoplastic acrylic resin. Group: Polymers. | |
| Thermosetting acrylic resin | Thermosetting acrylic resin |  Sarchem Laboratories New Jersey NJ |
| Thermosetting acrylic resin | Thermosetting acrylic resin. Group: Polymers. | |
| Water-based acrylic resin | Water-based acrylic resin. Group: Polymers. | |
| 2,6-Dimethyl-4-heptanone | Diisobutyl ketone is used as a solvent fornitrocellulose, lacquers, and synthetic resins;in organic syntheses.;Uses Diisobutyl ketone (DIBK) is a transparent liquid with a distinct odor and a high boiling point. It is an heavy-end byproduct of producing MIBK. DIBK is used in many applications such as nitrocellulose lacquers, synthetic resins, coatings and stains, paint strippers, leather finishings, adhesives, printing and coating inks, cleaning and dregreasing, Flavors and fragrances, solvent and re-crystallization aid for pharmaceuticals, mining, and as a chemical intermediate. DIBK has good activity for many synthetic resins including nitrocellulose, rosin esters, phenolics, hydrocarbons, alkyds, polyesters, and acrylics. It is useful as a retarder solvent to improve flow and minimize humidity blushing. The low density and low surface tension of DIBK enables formulators to develop high-solids coatings with low VOC content and excellent flow and leveling properties. DIBK has excellent viscosity reduction for and reduces surface tension in high solids coatings. It has good volume-to-weight advantage over other classes of solvents used in coatings. Alternative Names: isovaleron; METHYL NONYL KETONE, 2-HENDECANONE; 2,6-dimethylheptan-4-one; DIISOBUTYL KETONE (DIBK): CP; 2,6-Dimethylheptan-4-one; DIISOBUTYL KETONE FOR SYNTHESIS; DIISOBUTYLKETONE; ISOBUTYL KETONE; FEMA 3537; DIBK; Diisobutyl Ketone; 2,6-Dimethyl-4-H |  |
| 2P/2-Pyrrolidone | 2P (2-Pyrrolidone) is a widely-used solvent with outstanding characteristics. It is miscible with almost all other organic solvents and has a high boiling point. 2P is a compound containing nitrogen in a 5-membered ring. It has the following characteristics: Miscible in almost all organic solvents (alcohols, ethers, esters, aromatic hydrocarbons, chlorinated hydrocarbons, carbon disulfide, etc.) Mixes with water in all proportions. High boiling point. Chemically and thermally stable, non-corrosive. Uses: Pharmaceutical and cosmetic raw materials: γ-aminobutyric acid raw material; polyvinyl pyrrolidone raw material extraction agent: extraction of aromatic compounds plasticizers for polymer-based floor polish: acrylic; acrylic-styrene de-colorant: kerosene; rosin; fatty acids solvent: synthetic resins; agricultural chemicals (chlordane etc.); polyhydric alcohols (glycerin, sorbitol); other (printing inks etc.) starting material for organic synthesis: n-methylol compounds; γ-amino acid derivatives polymer raw material: 4-nylon. Group: Imaging materials. Alternative Names: 2-Pyrrolidone;Pyrrolidin-2-one;2-Pyrrolidinone. CAS No. 616-45-5 (T). Mole weight: 85.2. Catalog: ACM616455. | |
| 3-Glycidoxypropyltrimethoxysilane | It is epoxy functional silane used as adhesion promoters in SPUR, urethane, epoxy, polysulfide, silicone, and acrylic caulks, coatings, sealants and adhesives. Uses: It can improve the dry and wet strength of cured composites reinforced by glass fiber rovings, enhance the wet electrical properties of epoxy resin-based encapsulation and packaging materials, without the need to use separate primers in polysulfide and polyurethane sealants, and improve water-based acrylic adhesion of sealant, polyurethane and epoxy coatings. Group: Polymers. Alternative Names: Tetraethyl Orthosilicate ?Ethyl Silicate); Etylukrzemian(Polish); Silane, Tetraethoxy-; Silane,Tetraethoxy-; Silbond Condensed; Silester; Silicate D'Ethyle; Silicate Tetraethylique. CAS No. 2530-83-8. Pack Sizes: Packed with 5 L, 20 L or 210 L plastic/steel drum, 1000 L IBC container, or according to customer's requirement. Product ID: 3-Glycidoxypropyltrimethoxysilane. Molecular formula: 236.34. Mole weight: C9H20O5Si. 98%. | |
| 3-Glycidoxypropyltrimethoxysilane | It is epoxy functional silane used as adhesion promoters in SPUR, urethane, epoxy, polysulfide, silicone, and acrylic caulks, coatings, sealants and adhesives. Uses: It can improve the dry and wet strength of cured composites reinforced by glass fiber rovings, enhance the wet electrical properties of epoxy resin-based encapsulation and packaging materials, without the need to use separate primers in polysulfide and polyurethane sealants, and improve water-based acrylic adhesion of sealant, polyurethane and epoxy coatings. Group: Siloxanes. Alternative Names: Tetraethyl Orthosilicate ?Ethyl Silicate); Etylukrzemian(Polish); Silane, Tetraethoxy-;Silane, Tetraethoxy-;Silbond Condensed;Silester;Silicate D'Ethyle;Silicate Tetraethylique. CAS No. 2530-83-8. Molecular formula: C9H20O5Si. Mole weight: 236.34. Appearance: Colorless clear liquid. Purity: 0.98. IUPACName: 3-Glycidoxypropyltrimethoxysilane. Density: 1.07 g/mL. ECNumber: 219-784-2. Catalog: ACM2530838. | |
| Amberlite irc-76,ion exchange resin | Heterocyclic Organic Compound. CAS No. 11098-83-2. Molecular formula: Acrylic-DVB;Weaklyacidicgeltypecationresin. Mole weight: 36.46094;g/mol. Purity: 0.96. IUPACName: chlorane. Canonical SMILES: Cl. ECNumber: 231-595-7. Catalog: ACM11098832. | |
| Butyl acrylate resin | Butyl acrylate appears as a clear colorless liquid with a sharp characteristic odor. Very slightly soluble in water and somewhat less dense than water. Hence forms surface slick on water. Flash point 105°F. Density 7.5 lb / gal. Used for making paints, coatings, caulks, sealants, adhesives.;Liquid;COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR.;Clear, colorless liquid with a strong, fruity odor.;Clear, colorless liquid with a strong, fruity odor. [Note: Highly reactive; may contain an inhibitor to prevent spontaneous polymerization.]. Group: Biomaterials. Alternative Names: butyl acrylate resin;POLY(N-BUTYL ACRYLATE);POLY(BUTYL ACRYLATE);N-BUTYL ACRYLATE RESIN; 2-Propenoicacid, butylester, homopolymer; Acrylicacid, butylester, homopolymer; n-butylacrylateresin(40%intoluene; ButylacrylateresinintoluenemedMWt. CAS No. 9003-49-0. Molecular formula: CH2=CHCOOC4H9;C7H12O2;C7H12O2. Mole weight: 128.17g/mol. IUPACName: butyl prop-2-enoate. Canonical SMILES: CCCCOC(=O)C=C. Density: 0.899 at 68 °F (USCG, 1999);0.8898 g/cu cm at 20 °C;Relative density (water = 1): 0.90;0.89;0.89. ECNumber: 205-480-7;618-366-0. Catalog: ACM9003490. | |
| Butyl acrylate resin | Butyl acrylate appears as a clear colorless liquid with a sharp characteristic odor. Very slightly soluble in water and somewhat less dense than water. Hence forms surface slick on water. Flash point 105°F. Density 7.5 lb / gal. Used for making paints, coatings, caulks, sealants, adhesives.;Liquid;COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR.;Clear, colorless liquid with a strong, fruity odor.;Clear, colorless liquid with a strong, fruity odor. [Note: Highly reactive; may contain an inhibitor to prevent spontaneous polymerization.]. Group: Polymers. Alternative Names: butyl acrylate resin; POLY(N-BUTYL ACRYLATE); POLY(BUTYL ACRYLATE); N-BUTYL ACRYLATE RESIN; 2-Propenoicacid,butylester,homopolymer; Acrylicacid,butylester,homopolymer; n-butylacrylateresin(40%intoluene; ButylacrylateresinintoluenemedMWt. CAS No. 9003-49-0. Product ID: butyl prop-2-enoate. Molecular formula: 128.17g/mol. Mole weight: CH2=CHCOOC4H9;C7H12O2;C7H12O2. CCCCOC(=O)C=C. InChI=1S/C7H12O2/c1-3-5-6-9-7 (8)4-2/h4H, 2-3, 5-6H2, 1H3. CQEYYJKEWSMYFG-UHFFFAOYSA-N. | |
| C-12 Alcohol Ester Technical >99% | C-12 Alcohol Ester Technical >99%. Group: Acrylic resins. | |
| Carbomer | Carbomer is a term used for a group of synthetic high molecular weight polymers, such as polyacrylic acid, Cross-linked polyacrylic acid, or polymethacrylic acid. These polymers are generally used as thickening agents, emulsifiers, and stabilizers in cosmetic and personal care products. Carbomers work by absorbing and swelling in water, forming a gel-like consistency. When added to lotions, creams, gels, or other skincare products, carbomers give the product a thicker and more luxurious feel. They can also help to stabilize the formula and prevent it from separating or becoming runny. Uses: 1. carbomer is used as a thickening and suspending agent in various pharmaceuticals and personal care products like gels, creams, and lotions. 2. it helps to increase the viscosity of the product and improve its texture and stability. 3. carbomer is also used in ophthalmic solutions, nasal sprays, and oral suspensions as a suspending agent to ensure uniform drug distribution. 4. due to its excellent hydration and film-forming properties, it is utilized as a lubricant in contact lenses. 5. carbomer is widely used in the food industry as a thickener, stabilizer, and emulsifying agent. Group: Rheology modifiers. Alternative Names: Carboxypolymethylene resin;Poly(acrylic acid). CAS No. 9007-20-9. Molecular formula: C3H4O2. Appearance: white, fluffy powder. Density: 1.063 g/mL. Catalog: CI-HC-0113. | |
| Carbomer | Carbomers are used as rheology modifiers in liquid or semi-solid pharmaceutical formulations. In tablet formulations, carbomers are used as controlled release agents and/or binders. Synonyms: Carboxypolymethylene resin;Poly(acrylic acid). Grades: 95%. CAS No. 9007-20-9. Molecular formula: C3H4O2. | |
| Carbomer 934 | Carbomer 934. Synonyms: Acritamer; acrylic acid polymer; Carbopol; carboxy polymethylene, polyacrylic acid; carboxyvinyl polymer; Pemulen; Ultrez. CAS No. 9003-1-4. Product ID: PE-0310. Molecular formula: (C3H4O2)n. Category: Suspending Agents; Thickener. Product Keywords: Excipients for Liquid Dosage Form; Suspending Agents; PE-0310; Carbomer 934; Suspending Agents; Thickener; (C3H4O2)n; 9003-01-4. UNII: Z135WT9208. Chemical Name: Cross-linked polyacrylic resin. Grade: Pharmceutical Excipients. Administration route: Oral administration; Rectum; Vagina; Local administration. Dosage Form: Oral suspensions and tablets, ophthalmic preparations, rectal preparations and topical preparations. Stability and Storage Conditions: Carbomer is a stable and hygroscopic substance that does not affect its thickening when heated at 104°C for 2 hours. However, exposure to excessive temperatures can reduce discoloration and stability. It is completely decomposed by heating at 260°C for 30 minutes. Dry powdery carbomer does not grow mildew. In contrast, microbes grow well in preservative-free aqueous dispersions. Therefore, preservatives such as 0.1%(W/V) of chlorocresol, 0.18% (W/V) of hydroxyphenylene methyl, 0.02%(W/V) of hydroxyphenylene propyl, or 0.1%(W/V) of thiomersal should be added. The addition of certain bacteriostatic agents, such as benzalammonium chloride or sodium benzoate, at high concentrations (0.1%W/V) caused turbidity | |
| Carbomer 940 | Carbomer 940. Synonyms: Acritamer; acrylic acid polymer; Carbopol; carboxy polymethylene, polyacrylic acid; carboxyvinyl polymer; Pemulen; Ultrez. CAS No. 9003-1-4. Product ID: PE-0637. Molecular formula: (C3H4O2)n. Category: Suspending Agents; Thickener. Product Keywords: Excipients for Liquid Dosage Form; Suspending Agents; PE-0637; Carbomer 940; Suspending Agents; Thickener; (C3H4O2)n; 9003-01-4. UNII: 4Q93RCW27E. Chemical Name: Cross-linked polyacrylic resin. Grade: Pharmceutical Excipients. Administration route: Topical; Ophthalmic; Transdermal. Dosage Form: Oral suspensions and tablets, ophthalmic preparations, rectal preparations and topical preparations. Stability and Storage Conditions: Carbomer is a stable and hygroscopic substance that does not affect its thickening when heated at 104°C for 2 hours. However, exposure to excessive temperatures can reduce discoloration and stability. It is completely decomposed by heating at 260°C for 30 minutes. Dry powdery carbomer does not grow mildew. In contrast, microbes grow well in preservative-free aqueous dispersions. Therefore, preservatives such as 0.1%(W/V) of chlorocresol, 0.18% (W/V) of hydroxyphenylene methyl, 0.02%(W/V) of hydroxyphenylene propyl, or 0.1%(W/V) of thiomersal should be added. The addition of certain bacteriostatic agents, such as benzalammonium chloride or sodium benzoate, at high concentrations (0.1%W/V) caused turbidity and decreased viscosity | |
| Carbomer 974P | Carbomer 974P. Synonyms: Acritamer; acrylic acid polymer; Carbopol; carboxy polymethylene, polyacrylic acid; carboxyvinyl polymer; Pemulen; Ultrez. CAS No. 2594-32-2. Product ID: PE-0638. Molecular formula: (C3H4O2)n. Category: Suspending Agents; Thickener. Product Keywords: Excipients for Liquid Dosage Form; Suspending Agents; PE-0638; Carbomer 974P; Suspending Agents; Thickener; (C3H4O2)n; 2594-32-2. UNII: NA. Chemical Name: Cross-linked polyacrylic resin. Grade: Pharmceutical Excipients. Administration route: Topical; Ophthalmic; Transdermal. Dosage Form: Oral suspensions and tablets, ophthalmic preparations, rectal preparations and topical preparations. Stability and Storage Conditions: Carbomer is a stable and hygroscopic substance that does not affect its thickening when heated at 104°C for 2 hours. However, exposure to excessive temperatures can reduce discoloration and stability. It is completely decomposed by heating at 260°C for 30 minutes. Dry powdery carbomer does not grow mildew. In contrast, microbes grow well in preservative-free aqueous dispersions. Therefore, preservatives such as 0.1%(W/V) of chlorocresol, 0.18% (W/V) of hydroxyphenylene methyl, 0.02%(W/V) of hydroxyphenylene propyl, or 0.1%(W/V) of thiomersal should be added. The addition of certain bacteriostatic agents, such as benzalammonium chloride or sodium benzoate, at high concentrations (0.1%W/V) caused turbidity and decreased viscosity of c | |
| Dowex mac-3 ion exchange resin | Dowex mac-3 ion exchange resin. Group: Polymers. Alternative Names: 2-Propenoic acid,polymer with diethenylbenzene; Acrylic acid,divinylbenzene polymer. CAS No. 9052-45-3. Product ID: 1,2-bis(ethenyl)benzene; prop-2-enoic acid. Molecular formula: 202.2491. Mole weight: C13< / sub>H14< / sub>O2< / sub>. TXDYWJDYXZCRAN-UHFFFAOYSA-N. 96%. | |
| Hydroxypropyl acrylate | Used in the radiation curing system in active diluents and crosslinking agent, can also be as crosslinking agent of resin, plastic, rubber modifier. Group: Other plating chemicals. Alternative Names: HPA;Acrylic acid propane-1,2-diol ester. CAS No. 25584-83-2. Molecular formula: C6H10O3. Mole weight: 130.14. Appearance: Colorless transparent liquid. Catalog: ACEP25584832. | |
| Isobutyl Methacrylate | Isobutyl methacrylate is a colorless liquid with a flash point of 120°F. When heated to high temperatures it may release acrid smoke and fumes. If it is subjected to heat for prolonged periods or becomes contaminated, it is subject to polymerization. If the polymerization takes place inside a container, the container may violently rupture. The vapors are heavier than air. It may be irritating to skin and eyes and produce a narcotic effect. It is used in making acrylic resins.;Liquid. Group: Polymers. CAS No. 97-86-9. Pack Sizes: 1 kg. Product ID: 2-methylpropyl 2-methylprop-2-enoate. Molecular formula: 142.2g/mol. Mole weight: C8H14O2. CC(C)COC(=O)C(=C)C. InChI=1S/C8H14O2/c1-6 (2)5-10-8 (9)7 (3)4/h6H, 3, 5H2, 1-2, 4H3. RUMACXVDVNRZJZ-UHFFFAOYSA-N. | |
| Isobutyl Methacrylate (stabilized with HQ) | Isobutyl methacrylate is a colorless liquid with a flash point of 120°F. When heated to high temperatures it may release acrid smoke and fumes. If it is subjected to heat for prolonged periods or becomes contaminated, it is subject to polymerization. If the polymerization takes place inside a container, the container may violently rupture. The vapors are heavier than air. It may be irritating to skin and eyes and produce a narcotic effect. It is used in making acrylic resins.;Liquid. Group: Monomers. CAS No. 97-86-9. Product ID: 2-methylpropyl 2-methylprop-2-enoate. Molecular formula: 142.2g/mol. Mole weight: C8H14O2. CC(C)COC(=O)C(=C)C. InChI=1S/C8H14O2/c1-6 (2)5-10-8 (9)7 (3)4/h6H, 3, 5H2, 1-2, 4H3. RUMACXVDVNRZJZ-UHFFFAOYSA-N. | |
| Isobutyl Methacrylate, (stabilized with HQ) | Isobutyl methacrylate is a colorless liquid with a flash point of 120°F. When heated to high temperatures it may release acrid smoke and fumes. If it is subjected to heat for prolonged periods or becomes contaminated, it is subject to polymerization. If the polymerization takes place inside a container, the container may violently rupture. The vapors are heavier than air. It may be irritating to skin and eyes and produce a narcotic effect. It is used in making acrylic resins.;Liquid. Group: Polymers. CAS No. 97-86-9. Product ID: 2-methylpropyl 2-methylprop-2-enoate. Molecular formula: 142.2g/mol. Mole weight: C8H14O2. CC(C)COC(=O)C(=C)C. InChI=1S/C8H14O2/c1-6 (2)5-10-8 (9)7 (3)4/h6H, 3, 5H2, 1-2, 4H3. RUMACXVDVNRZJZ-UHFFFAOYSA-N. | |
| methyl methacrylate Purified 99.9% | methyl methacrylate Purified 99.9%. Group: Acrylic resins. | |
| Polyacrylamide | Polyacrylamide. Group: Biochemicals. Alternative Names: Acrylamide, polymers (8CI); 2-Propenamide hydrochloride homopolymer; 2300S; 2J; 3330s; 38F; 920MPM; AK; AK (flocculant); AMF; AP 273; ASP 6; Accotrol S 622; Acrylamide homopolymer; Acrylamide polymer; Acryperse M 2000A; Acryperse M 2000H; Alcoflood 1175; American Cyanamid KPAM; American Cyanamid P 250; Aminogen PA; Amol; Aquamid; Aquasorb 3005KB; Aron F 40; BanDrift; Boze Floc N 46BT; CM 303; CM 311; CM 311 (polymer); CPF 802; CS 141; CS 141 (polymer); Calgon 470; Calgon 800; Cogum 20P; Cogum 25H; Colsize WLV; Companion PCT 12; Cosmogel; Cosmotone Z; Criterion TGX Any kD Stain-Free Precast Gel; Cyanamer A 15L; Cyanamer N 10; Cyanamer N 100; Cyanamer N 100L; Cyanamer N 300; Cyanamer N 300LMW; Cyanamer P 250; Cyanamer P 35; Cytame 5; DALT; DK Dry Capsule ESP; DKS-ORP-F 40NT; DP 1916; DP 9-6193; DP 9-8177; DP-FO; DS 415; DS 4356; DS 470; Diaclear MA 3000H; Diaclear MN 3000; Diaclear MN 3000H; Discol 4600; Dow 164; Dow ET 597; Dow J 100; E 936; ET 597; EX 288; EX 420; Fennopol K 6450; Floc 1403C; Floc 1405C; Floc 1408C; Flopam AN 945; Flygtol GB; Formacryl; Formula 358; GPA-u; Gelamide 250; Get-Down; H 106; H 106 (acrylic resin); Hamacoat P 3800; Haricoat 1057; Haricoat 6045; Haricoat G 160; H. . CAS No. 9003-5-8. Pack Sizes: 1g. Molecular Formula: (C3H5NO)x, Molecular Weight: 101.15. US Biological Life Sciences. |  Worldwide |
| Poly(acrylamide/acrylic acid)[60:40],mw >10,000,000 | Polyacrylamides are a family of high molecular weight, water-soluble polymers. Anionic polyacrylamides (aPAMs) are used in the construction field as a thickener or flocculent. Polyacrylamides (PAMs) are used to increase the dry strength of papers by hydrogen bonding. Used in Film forming; Antistatic. Group: Polymer/macromolecule. Alternative Names: LINEAR POLYACRYLAMIDE;AQUACIDE IV;GENELUTE(TM)-LPA;ACRYLAMIDE POLYMER;ACRYLAMIDE RESIN;POLYACRYLAMIDE RESIN;POLY(ACRYLAMIDE/ACRYLIC ACID NA SALT);SPAR-50. CAS No. 25085-02-3. Mole weight: >10,000,000. Density: 1.14. Catalog: ACM25085023. | |
| Poly(methyl methacrylate) | Methyl methacrylate monomer appears as a clear colorless liquid. Slightly soluble in water and floats on water. Vapors heavier than air. Vapors irritate the eyes and respiratory system. Containers must be heavily insulated or shipped under refrigeration. An inhibitor such as hydroquinone, hydroquinone methyl ester and dimethyl t-butylphenol is added to keep the chemical from initiating polymerization. The chemical may polymerize exothermically if heated or contaminated with strong acid or base. If the polymerization takes place inside a container, the container may rupture violently. Used to make plastics. Uses: Acrylates and methacrylates are monomers that are combined with other monomers or polymers to produce plastics used in cosmetics, medicine, dentistry, and manufacturing industries.occupational asthma in operating room nurse; used to make lucite, plexiglas, paper coatings, latex paints, inks, polishes, dental restorations, adhesive cements, surgical implants, and impregnated concrete. Synonyms: METHYL METHACRYLATE POLYMER; METHYL METHACRYLATE, POLYMERIZED; METHYL METHACRYLATE RESIN; METHACRYLIC ACID METHYL ESTER POLYMER; LUCITE; POLY(METHYL METHACRYLATE-CO-ETHYL ACRYLATE); POLY(METHYL METHACRYLATE), ISOTACTIC; POLY(METHYL METHACRYLATE). Grades: 98%. CAS No. 9011-14-7. Molecular formula: (C5H8O2)x. Mole weight: 99.1083. | |
| Poly(methyl methacrylate) | PMMA is a transparent plastic that offers incredible strength and stiffness and can be optically clear. This transparency makes it easy for advanced vision systems or employees performing physical visual inspections to analyze and monitor food product quality throughout transportation. Uses: Pmma is often used to store milk and other dairy products, oils, and feed for animals. acrylic is also used to create mixing bowls, where transparency can aid mixing and other cooking process applications. pmma is bpa-free and non-toxic when solid, and its so biocompatible that acrylic is frequently used in dentures and cavity fillings. Group: 3d printing materials bioelectronic materials hydrophobic polymersself assembly and lithographyorganic field effect transistor (ofet) materials polymersfood grade plastic. Alternative Names: Poly(methyl methacrylate), Methyl methacrylate resin, Perspex. CAS No. 9011-14-7. Pack Sizes: 25 g in poly bottle. Product ID: Poly(methyl 2-methylpropenoate). Molecular formula: average Mw ~350000 by GPC. Mole weight: [CH2C(CH3)(CO2CH3)]n. 1S/C5H9O2/c1-4(2)5(6)7-3/h1-3H3. PMAMJWJDBDSDHV-UHFFFAOYSA-N. | |
| Poly(methyl methacrylate) | Poly(methyl methacrylate). Group: Polymers. Alternative Names: ETHYL ACRYLATE-METHYL METHACRYLATE LATEX; METHYL METHACRYLATE POLYMER; METHYL METHACRYLATE, POLYMERIZED; METHYL METHACRYLATE RESIN; METHACRYLIC ACID METHYL ESTER POLYMER; LUCITE; POLYBEAD(R) PMMA MICROSPHERES; POLYBEAD(R) POLY(METHYL METHACRYLATE) MICROSPHERES. CAS No. 9010-88-2. Product ID: ethyl prop-2-enoate; methyl 2-methylprop-2-enoate. Molecular formula: 200.23g/mol. Mole weight: C10H16O4. CCOC(=O)C=C.CC(=C)C(=O)OC. InChI=1S/2C5H8O2/c1-4(2)5(6)7-3; 1-3-5(6)7-4-2/h1H2, 2-3H3; 3H, 1, 4H2, 2H3. XPNLOZNCOBKRNJ-UHFFFAOYSA-N. | |
| Poly(p-toluenesulfonamide-co-formaldehyde) | Poly(p-toluenesulfonamide-co-formaldehyde). CAS No. 25035-71-6. Pack Sizes: 25 kg. Product ID: CDC10-0293. Molecular formula: C8H11NO3S. Category: Cosmetic Plasticizers. Product Keywords: Cosmetic Ingredients; Cosmetic Plasticizers; Poly(p-toluenesulfonamide-co-formaldehyde); CDC10-0293; 25035-71-6; C8H11NO3S; 25035-71-6. Purity: 0.99. Melting Point: 82 °C. Product Description: Toluenesulfonamide formaldehyde resin is used as intensifier and plasticizer in polyamide, epoxy resin, phenol-formaldehyde resin, printing inks, coatings etc.;Uses Toluene sulfonamide formaldehyde resin is used as modifier and adhesion promotor for film-forming natural and synthetic resins; in vinyllacquers, nitrocellulose compositions (naillacquers), polyvinyl alcohol adhesives, acrylics. | |
| 2-Hydroxyethyl acrylate | Used in the radiation curing system in active diluents and crosslinking agent, can also be as crosslinking agent of resin, plastic, rubber modifier. Group: Other plating chemicals. Alternative Names: HEA;Ethylene glycol monoacrylate. CAS No. 818-61-1. Molecular formula: C5H8O3. Mole weight: 116.12. Appearance: Colorless transparent liquid. Catalog: ACEP818611. | |
| Abs resins | Abs resins. Group: Polymers. Alternative Names: 2-propenenitrile,polymerwith1,3-butadieneandethenylbenzene; abs; abscopolymer; absresin; absresins; acrylonitrile,polymerwith1,3-butadieneandstyrene; acrylonitrile-butadiene-styrenecopolymers; Acrylonitrile-butadiene-styreneterpolymer. CAS No. 9003-56-9. Product ID: ABS Resins. Molecular formula: 633.91. Mole weight: C45< / sub>H51< / sub>N3< / sub>X2< / sub>. 96%. | |
| Acrylonitrile Butadiene Styrene | ABS is an adaptable and practical thermoplastic suitable for a variety of end markets. ABS resin combines strong mechanical properties with excellent physical appearance at an affordable price. Uses: Abs can be applied to the electronic and electrical industry, medical equipment, coating industry and electroplating industry, etc. Group: Acrylonitrile butadiene styrene (abs). | |
| Acrylonitrile ButadieneStyrene(ABS Resin) | Acrylonitrile ButadieneStyrene(ABS Resin). Group: Polymers. | |
| Acrylonitrile Butadiene Styrene + PC (18 g/10 min) | ABS is an adaptable and practical thermoplastic suitable for a variety of end markets. ABS resin combines strong mechanical properties with excellent physical appearance at an affordable price. Uses: Abs can be applied to the electronic and electrical industry, medical equipment, coating industry and electroplating industry, etc. Group: Acrylonitrile butadiene styrene (abs). | |
| Acrylonitrile Butadiene Styrene + PC (Plating grade, 16 g / 10 min) | ABS is an adaptable and practical thermoplastic suitable for a variety of end markets. ABS resin combines strong mechanical properties with excellent physical appearance at an affordable price. Uses: Abs can be applied to the electronic and electrical industry, medical equipment, coating industry and electroplating industry, etc. Group: Acrylonitrile butadiene styrene (abs). | |
| Acrylonitrile-butadiene-styrene/polycarbonate blend | Polycarbonate resin combines strong impact properties with high transparency, making it useful for a wide variety of applications. Lightweight and highly processable, PC resin can be used for precision molding at a wide range of temperatures. Uses: Automotive, optics, electronics, industrial, consumer goods. Group: Polycarbonates (pc). | |
| Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide | Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO) is a monoacylphosphine oxide based photoinitiator that can be incorporated in a variety of polymeric matrixes for efficient curing and color stability of the resin. Uses: Tpo can be used in the photo-crosslinking of pmma composite, which can further be used as a gate insulator in organic thin film transistors (otfts). it can also be used in the formation of uv curable urethane-acrylate coatings. it may also be used in the photoinduced reaction for the formation of organophosphine compounds, which potentially find their usage as ligands with metal catalysts and reagents. Alternative Names: 2,4,6-Trimethylbenzoylphenyl phosphinate, (Diphenylphosphoryl) (mesityl)methanone, (2,4,6-Trimethylbenzoyl)diphenylphosphine oxide. CAS No. 75980-60-8. Molecular formula: C22H21O2P. Mole weight: 348.37. Appearance: White or cream powder. Purity: 95%+. IUPACName: Diphenylphosphoryl-(2,4,6-trimethylphenyl)methanone. Canonical SMILES: CC1=CC (=C (C (=C1)C)C (=O)P (=O) (C2=CC=CC=C2)C3=CC=CC=C3)C. Density: 1.17 g/cm³. ECNumber: 278-355-8. Catalog: ACM75980608-2. | |
| Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide | Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO) is a monoacylphosphine oxide based photoinitiator that can be incorporated in a variety of polymeric matrixes for efficient curing and color stability of the resin. Uses: Tpo can be used in the photo-crosslinking of pmma composite, which can further be used as a gate insulator in organic thin film transistors (otfts). it can also be used in the formation of uv curable urethane-acrylate coatings. it may also be used in the photoinduced reaction for the formation of organophosphine compounds, which potentially find their usage as ligands with metal catalysts and reagents. Group: Polymerization reagents. Alternative Names: 2,4,6-Trimethylbenzoylphenyl phosphinate, (Diphenylphosphoryl) (mesityl)methanone, (2,4,6-Trimethylbenzoyl)diphenylphosphine oxide. CAS No. 75980-60-8. Pack Sizes: Packaging 10, 50 g in poly bottle. Product ID: Diphenylphosphoryl-(2,4,6-trimethylphenyl)methanone. Molecular formula: 348.37. Mole weight: C22H21O2P. CC1=CC (=C (C (=C1)C)C (=O)P (=O) (C2=CC=CC=C2)C3=CC=CC=C3)C. InChI=1S/C22H21O2P/c1-16-14-17 (2) 21 (18 (3) 15-16) 22 (23) 25 (24, 19-10-6-4-7-11-19) 20-12-8-5-9-13-20/h4-15H, 1-3H3. VFHVQBAGLAREND-UHFFFAOYSA-N. 95%+. | |
| Fmoc-NH-SAL-PEGA Resin | Synonyms: 4-[ (2, 4-Dimethoxyphenyl) -N- (9-fluorenylmethoxycarbonyl) aminomethyl]phenoxyacetamido polyethyleneglycol polyacrylamide copolymer; N-α-(9-Fluorenylmethoxycarbonyl)-Rinkamide handled bis-2-acrylamidoprop-1-yl polyethyleneglycol crosslinked dimethyl acrylamide and acryloyl sarcosine methyl ester. | |
| Polybutadiene, cis | Polybutadiene, cis (PB-cis) is a synthetic rubber that is prepared by solution polymerization of 1,4-butadiene. Its mechanical properties include low temperature flexibility and abrasion resistance. It can be cured by using sulfur based donors and peroxides and thus PB-cis acts as a highly cross-linked polymer with high resilience. Uses: Pb-cis can be polymerized with styrene for the formation of high impact polystyrene (hips). it may also be used as a toughening agent for acrylonitrile butadiene rubber (abs) based resins. Group: Hydrophobic polymers. CAS No. 9003-17-2. Pack Sizes: 100 g in poly bottle. Product ID: buta-1,3-diene. Molecular formula: average Mw 200,000-300,000. Mole weight: (CH2CH=CHCH2)n. C=CC=C. 1S/C4H8/c1-3-4-2/h3-4H,1-2H3/b4-3+. IAQRGUVFOMOMEM-ONEGZZNKSA-N. | |
Our database is helping our users find suppliers everyday.
