Odor Removal Suppliers USA
Find where to buy products from suppliers in the USA, including: distributors, industrial manufacturers in America, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the American suppliers website for prices, SDS or more information. You can also view suppliers in Australia, NZ or the UK.
Product | Description | |
---|---|---|
α-Cellulose Quick inquiry Where to buy Suppliers range | α-Cellulose. Uses: Cellulose is an odorless, white powdery fibers. Density: 1.5 g/cm³. The biopolymer composing the cell wall of vegetable tissues. Prepared by treating cotton with an organic solvent to de-wax it and removing pectic acids by extration with a solution of sodium hydroxide. The principal fiber composing the cell wall of vegetable tissues (wood, cotton, flax, grass, etc.). Technical uses depend on the strength and flexibility of its fibers. Insoluble in water. Soluble with chemical degradation in sulfuric aicd, and in concentrated solutions of zinc chloride. Soluble in aqueous solutions of cupric ammonium hydroxide (Cu(NH3)4(OH)2).;A white, odourless powder;Odorless, white substance.;Odorless, white substance. [Note: The principal fiber cell wall material of vegetable tissues (wood, cotton, flax, grass, etc.).]. Group: Polysaccharide; Polymers. CAS No. 9004-34-6. IUPAC Name: (6S)-2-(hydroxymethyl)-6-[(3S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol. Molecular Weight: 342.3g/mol. Molecular Formula: (C6H10O5)n;C12H22O11. SMILES: C (C1C (C (C (C (O1)OC2C (OC (C (C2O)O)O)CO)O)O)O)O. InChI: InChI=1S/C12H22O11/c13-1-3-5(15)6(16)9(19)12(22-3)23-10-4(2-14)21-11(20)8(18)7(10)17/h3-20H,1-2H2/t3?,4?,5?,6?,7?,8?,9?,10-,11?,12+/m1/s1. InChIKey: GUBGYTABKSRVRQ-WFVLMXAXSA-N. Boiling Point: Decomposes (NIOSH, 2016);Decomposes;Decomposes. Melting Point: 500 to 518 °F (Decomposes) (NIOSH, 2016);500-518°F (decomposes);500-518°F (Decomposes). Density: 1.27 to 1.61 (NIOSH, 2016);1.27-1.61;1.27-1.61. Solubility: Insoluble (NIOSH, 2016);Insoluble in water, ethanol, ether and dilute mineral acids. Slightly soluble in sodium hydroxide solution;Insoluble. | |
α-Cellulose, 25μm particle size Quick inquiry Where to buy Suppliers range | α-Cellulose, 25μm particle size. Uses: Cellulose is an odorless, white powdery fibers. Density: 1.5 g/cm³. The biopolymer composing the cell wall of vegetable tissues. Prepared by treating cotton with an organic solvent to de-wax it and removing pectic acids by extration with a solution of sodium hydroxide. The principal fiber composing the cell wall of vegetable tissues (wood, cotton, flax, grass, etc.). Technical uses depend on the strength and flexibility of its fibers. Insoluble in water. Soluble with chemical degradation in sulfuric aicd, and in concentrated solutions of zinc chloride. Soluble in aqueous solutions of cupric ammonium hydroxide (Cu(NH3)4(OH)2).;A white, odourless powder;Odorless, white substance.;Odorless, white substance. [Note: The principal fiber cell wall material of vegetable tissues (wood, cotton, flax, grass, etc.).]. Group: Polymers. CAS No. 9004-34-6. IUPAC Name: (6S)-2-(hydroxymethyl)-6-[(3S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol. Molecular Weight: 342.3g/mol. Molecular Formula: (C6H10O5)n;C12H22O11. SMILES: C (C1C (C (C (C (O1)OC2C (OC (C (C2O)O)O)CO)O)O)O)O. InChI: InChI=1S/C12H22O11/c13-1-3-5(15)6(16)9(19)12(22-3)23-10-4(2-14)21-11(20)8(18)7(10)17/h3-20H,1-2H2/t3?,4?,5?,6?,7?,8?,9?,10-,11?,12+/m1/s1. InChIKey: GUBGYTABKSRVRQ-WFVLMXAXSA-N. Boiling Point: Decomposes (NIOSH, 2016);Decomposes;Decomposes. Melting Point: 500 to 518 °F (Decomposes) (NIOSH, 2016);500-518°F (decomposes);500-518°F (Decomposes). Density: 1.27 to 1.61 (NIOSH, 2016);1.27-1.61;1.27-1.61. Solubility: Insoluble (NIOSH, 2016);Insoluble in water, ethanol, ether and dilute mineral acids. Slightly soluble in sodium hydroxide solution;Insoluble. | |
α-Cellulose, 65μm particle size Quick inquiry Where to buy Suppliers range | α-Cellulose, 65μm particle size. Uses: Cellulose is an odorless, white powdery fibers. Density: 1.5 g/cm³. The biopolymer composing the cell wall of vegetable tissues. Prepared by treating cotton with an organic solvent to de-wax it and removing pectic acids by extration with a solution of sodium hydroxide. The principal fiber composing the cell wall of vegetable tissues (wood, cotton, flax, grass, etc.). Technical uses depend on the strength and flexibility of its fibers. Insoluble in water. Soluble with chemical degradation in sulfuric aicd, and in concentrated solutions of zinc chloride. Soluble in aqueous solutions of cupric ammonium hydroxide (Cu(NH3)4(OH)2).;A white, odourless powder;Odorless, white substance.;Odorless, white substance. [Note: The principal fiber cell wall material of vegetable tissues (wood, cotton, flax, grass, etc.).]. Group: Polymers. CAS No. 9004-34-6. IUPAC Name: (6S)-2-(hydroxymethyl)-6-[(3S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol. Molecular Weight: 342.3g/mol. Molecular Formula: (C6H10O5)n;C12H22O11. SMILES: C (C1C (C (C (C (O1)OC2C (OC (C (C2O)O)O)CO)O)O)O)O. InChI: InChI=1S/C12H22O11/c13-1-3-5(15)6(16)9(19)12(22-3)23-10-4(2-14)21-11(20)8(18)7(10)17/h3-20H,1-2H2/t3?,4?,5?,6?,7?,8?,9?,10-,11?,12+/m1/s1. InChIKey: GUBGYTABKSRVRQ-WFVLMXAXSA-N. Boiling Point: Decomposes (NIOSH, 2016);Decomposes;Decomposes. Melting Point: 500 to 518 °F (Decomposes) (NIOSH, 2016);500-518°F (decomposes);500-518°F (Decomposes). Density: 1.27 to 1.61 (NIOSH, 2016);1.27-1.61;1.27-1.61. Solubility: Insoluble (NIOSH, 2016);Insoluble in water, ethanol, ether and dilute mineral acids. Slightly soluble in sodium hydroxide solution;Insoluble. | |
α-Cellulose, 90μm Quick inquiry Where to buy Suppliers range | α-Cellulose, 90μm. Uses: Cellulose is an odorless, white powdery fibers. Density: 1.5 g/cm³. The biopolymer composing the cell wall of vegetable tissues. Prepared by treating cotton with an organic solvent to de-wax it and removing pectic acids by extration with a solution of sodium hydroxide. The principal fiber composing the cell wall of vegetable tissues (wood, cotton, flax, grass, etc.). Technical uses depend on the strength and flexibility of its fibers. Insoluble in water. Soluble with chemical degradation in sulfuric aicd, and in concentrated solutions of zinc chloride. Soluble in aqueous solutions of cupric ammonium hydroxide (Cu(NH3)4(OH)2).;A white, odourless powder;Odorless, white substance.;Odorless, white substance. [Note: The principal fiber cell wall material of vegetable tissues (wood, cotton, flax, grass, etc.).]. Group: Polymers. CAS No. 9004-34-6. IUPAC Name: (6S)-2-(hydroxymethyl)-6-[(3S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol. Molecular Weight: 342.3g/mol. Molecular Formula: (C6H10O5)n;C12H22O11. SMILES: C (C1C (C (C (C (O1)OC2C (OC (C (C2O)O)O)CO)O)O)O)O. InChI: InChI=1S/C12H22O11/c13-1-3-5(15)6(16)9(19)12(22-3)23-10-4(2-14)21-11(20)8(18)7(10)17/h3-20H,1-2H2/t3?,4?,5?,6?,7?,8?,9?,10-,11?,12+/m1/s1. InChIKey: GUBGYTABKSRVRQ-WFVLMXAXSA-N. Boiling Point: Decomposes (NIOSH, 2016);Decomposes;Decomposes. Melting Point: 500 to 518 °F (Decomposes) (NIOSH, 2016);500-518°F (decomposes);500-518°F (Decomposes). Density: 1.27 to 1.61 (NIOSH, 2016);1.27-1.61;1.27-1.61. Solubility: Insoluble (NIOSH, 2016);Insoluble in water, ethanol, ether and dilute mineral acids. Slightly soluble in sodium hydroxide solution;Insoluble. | |
α-Cellulose, Partical size: d50,180-280μm Quick inquiry Where to buy Suppliers range | α-Cellulose, Partical size: d50,180-280μm. Uses: Cellulose is an odorless, white powdery fibers. Density: 1.5 g/cm³. The biopolymer composing the cell wall of vegetable tissues. Prepared by treating cotton with an organic solvent to de-wax it and removing pectic acids by extration with a solution of sodium hydroxide. The principal fiber composing the cell wall of vegetable tissues (wood, cotton, flax, grass, etc.). Technical uses depend on the strength and flexibility of its fibers. Insoluble in water. Soluble with chemical degradation in sulfuric aicd, and in concentrated solutions of zinc chloride. Soluble in aqueous solutions of cupric ammonium hydroxide (Cu(NH3)4(OH)2).;A white, odourless powder;Odorless, white substance.;Odorless, white substance. [Note: The principal fiber cell wall material of vegetable tissues (wood, cotton, flax, grass, etc.).]. Group: Polymers. CAS No. 9004-34-6. IUPAC Name: (6S)-2-(hydroxymethyl)-6-[(3S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol. Molecular Weight: 342.3g/mol. Molecular Formula: (C6H10O5)n;C12H22O11. SMILES: C (C1C (C (C (C (O1)OC2C (OC (C (C2O)O)O)CO)O)O)O)O. InChI: InChI=1S/C12H22O11/c13-1-3-5(15)6(16)9(19)12(22-3)23-10-4(2-14)21-11(20)8(18)7(10)17/h3-20H,1-2H2/t3?,4?,5?,6?,7?,8?,9?,10-,11?,12+/m1/s1. InChIKey: GUBGYTABKSRVRQ-WFVLMXAXSA-N. Boiling Point: Decomposes (NIOSH, 2016);Decomposes;Decomposes. Melting Point: 500 to 518 °F (Decomposes) (NIOSH, 2016);500-518°F (decomposes);500-518°F (Decomposes). Density: 1.27 to 1.61 (NIOSH, 2016);1.27-1.61;1.27-1.61. Solubility: Insoluble (NIOSH, 2016);Insoluble in water, ethanol, ether and dilute mineral acids. Slightly soluble in sodium hydroxide solution;Insoluble. | |
α-Cellulose, Partical size: d50,90-150μm Quick inquiry Where to buy Suppliers range | α-Cellulose, Partical size: d50,90-150μm. Uses: Cellulose is an odorless, white powdery fibers. Density: 1.5 g/cm³. The biopolymer composing the cell wall of vegetable tissues. Prepared by treating cotton with an organic solvent to de-wax it and removing pectic acids by extration with a solution of sodium hydroxide. The principal fiber composing the cell wall of vegetable tissues (wood, cotton, flax, grass, etc.). Technical uses depend on the strength and flexibility of its fibers. Insoluble in water. Soluble with chemical degradation in sulfuric aicd, and in concentrated solutions of zinc chloride. Soluble in aqueous solutions of cupric ammonium hydroxide (Cu(NH3)4(OH)2).;A white, odourless powder;Odorless, white substance.;Odorless, white substance. [Note: The principal fiber cell wall material of vegetable tissues (wood, cotton, flax, grass, etc.).]. Group: Polymers. CAS No. 9004-34-6. IUPAC Name: (6S)-2-(hydroxymethyl)-6-[(3S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol. Molecular Weight: 342.3g/mol. Molecular Formula: (C6H10O5)n;C12H22O11. SMILES: C (C1C (C (C (C (O1)OC2C (OC (C (C2O)O)O)CO)O)O)O)O. InChI: InChI=1S/C12H22O11/c13-1-3-5(15)6(16)9(19)12(22-3)23-10-4(2-14)21-11(20)8(18)7(10)17/h3-20H,1-2H2/t3?,4?,5?,6?,7?,8?,9?,10-,11?,12+/m1/s1. InChIKey: GUBGYTABKSRVRQ-WFVLMXAXSA-N. Boiling Point: Decomposes (NIOSH, 2016);Decomposes;Decomposes. Melting Point: 500 to 518 °F (Decomposes) (NIOSH, 2016);500-518°F (decomposes);500-518°F (Decomposes). Density: 1.27 to 1.61 (NIOSH, 2016);1.27-1.61;1.27-1.61. Solubility: Insoluble (NIOSH, 2016);Insoluble in water, ethanol, ether and dilute mineral acids. Slightly soluble in sodium hydroxide solution;Insoluble. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (100) orientation Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (100) orientation. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (110) orientation, ±2° Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (110) orientation, ±2°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (111) orientation, ±2° Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (111) orientation, ±2°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, random orientation Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, random orientation. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (100) orientation Quick inquiry Where to buy Suppliers range | Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (100) orientation. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (110) orientation ±0.5° Quick inquiry Where to buy Suppliers range | Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (110) orientation ±0.5°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (111) orientation, ±0.5° Quick inquiry Where to buy Suppliers range | Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (111) orientation, ±0.5°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 3.175mm (0.125in) dia x 3.175mm (0.125in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 3.175mm (0.125in) dia x 3.175mm (0.125in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 3.175mm (0.125in) dia x 6.35mm (0.25in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 3.175mm (0.125in) dia x 6.35mm (0.25in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 6.35mm (0.25in) dia x 12.7mm (0.50in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 6.35mm (0.25in) dia x 12.7mm (0.50in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 6.35mm (0.25in) dia x 6.35mm (0.25in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 6.35mm (0.25in) dia x 6.35mm (0.25in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum sputtering target, 50.8mm (2.0in) dia x 3.18mm (0.125in) thick, 99.999% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum sputtering target, 50.8mm (2.0in) dia x 3.18mm (0.125in) thick, 99.999% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Evaporation Materials. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Babassuamidopropropyl Betaine Quick inquiry Where to buy Suppliers range | Babassuamidopropropyl Betaine is a synthesized surfactant ingredient that is derived from Babassu oil. It is commonly used in hair and skin care products as a cleansing agent and foam booster. Uses: 1. Babassuamidopropyl Betaine is a surfactant, which is widely used in personal care products such as shampoos, bath gels, and body washes. 2. It is known for its gentle cleaning properties, and helps to remove dirt and oil from the skin and hair. 3. Babassuamidopropyl Betaine is derived from babassu oil, which is obtained from the seeds of the babassu palm tree found in South America. 4. Due to its mild nature, it is suitable for all skin types, even for sensitive skin. 5. It is also biodegradable and eco-friendly, making it a preferred choice for environmentally conscious consumers. 6. Babassuamidopropyl Betaine can also act as a foam booster and thickening agent in formulations. Group: Mild Sulfate Free Amphoteric. CAS No. 223704-95-8. Product ID: ACM223704958. Appearance: clear to slightly yellow liquid with a faint odor. | |
Botanical Toner Base Quick inquiry Where to buy Suppliers range | Toner base that effectively cleanses and removes residues leaving pores sparkly clean. Different herbal extracts will have cleansing and calming properties. Rich in vitamins and minerals with antioxidant protection. Ideal to use after each cleansing. pH balanced (4.5-5.5). 90% organic content. Group: Skin Actives. Product ID: ACMA00029470. Appearance: Clear liquid, bland odor. | |
Cannabis Seedamidopropyl Hydroxysultaine Quick inquiry Where to buy Suppliers range | Cannabis Seedamidopropyl Hydroxysultaine is a cosmetic ingredient derived from cannabis sativa seeds. It is a surfactant and foam booster that is commonly used in shampoos, conditioners, and other hair care products. It has gentle cleansing properties that help to remove dirt and oil from the hair, without stripping away its natural oils. In addition to its cleansing properties, Cannabis Seedamidopropyl Hydroxysultaine is also used in cosmetic formulations for its conditioning and moisturizing properties. It helps to hydrate and soften the hair, making it more manageable and easier to comb. Uses: 1. Cannabis Seedamidopropyl Hydroxysultaine is used as a surfactant in personal care products such as shampoos, body washes, and facial cleansers. 2. It helps in creating a rich foam and improving the texture of the product. 3. This ingredient also provides gentle cleansing and conditioning properties to the skin and hair. 4. It helps to maintain the skin's natural moisture and leaves the hair feeling soft and smooth. 5. Cannabis Seedamidopropyl Hydroxysultaine is a biodegradable ingredient making it an eco-friendly option for personal care products. 6. It is a derived from natural sources making it safe and non-toxic. Group: Mild Sulfate Free Amphoteric. CAS No. 68139-30-0. Product ID: ACM68139300-3. Appearance: clear to light yellow liquid with a mild odor. | |
Cetyl Alcohol (palmityl alcohol) Quick inquiry Where to buy Suppliers range | Cetyl alcohol, also known as 1-hexadecanol or palmityl alcohol, is a fatty alcohol that is derived from natural sources such as coconut oil, palm oil or whale oil. It is a white, waxy, solid substance that has a slight odor. Cetyl alcohol is commonly used in cosmetic and personal care products to give them a thick, creamy texture or to stabilize emulsions. Uses: 1. Cetyl alcohol is used as an emollient in various skin care products. 2. It acts as a thickening agent in lotions and creams, helping to improve their consistency and stability. 3. It is also used as a moisturizer in hair care products, to help improve the texture and appearance of hair. 4. Cetyl alcohol is used as a surfactant in various cleaning products, helping to remove dirt and grease from surfaces. 5. It is also used in the production of pharmaceutical products, such as ointments and lotions, as it can help to improve the absorption of active ingredients. Group: Hair Actives. CAS No. 36653-82-4. Product ID: ACM36653824-4. Appearance: white, waxy solid with a faint odor. | |
Cocoamidopropylbetaine Quick inquiry Where to buy Suppliers range | Cocoamidopropyl Betaine (CAPB) is a synthetic surfactant derived from coconut oil and dimethylaminopropylamine. It is commonly used in personal care products such as shampoos, conditioners, and bath products as a cleansing and foaming agent. CAPB is also used in household cleaning products and industrial applications as a cleansing and wetting agent. It is highly effective at removing dirt, grease, and other substances from surfaces and is considered to be gentle on the skin. CAPB has a low toxicity and is biodegradable, which makes it an environmentally-friendly choice in many applications. Uses: 1. Cocoamidopropylbetaine is a surfactant commonly used in personal care products like shampoos, shower gels, and hand soaps. 2. It is known for its good foaming and cleansing properties. 3. It helps to create a stable lather and improve the viscosity of the product. 4. Cocoamidopropylbetaine is a mild and gentle surfactant that is less irritating to the skin and eyes than some other detergents. 5. Additionally, it is biodegradable and environmentally friendly. 6. It may also be used in industrial applications such as detergents, cleaners, and emulsion polymerization. Group: Performance Blends. CAS No. 86438-79-1. Product ID: ACM86438791-2. Appearance: clear to pale yellow liquid with mild characteristic odor. | |
Cocoamidopropyl Hydroxysultaine (Coconut Oil) Quick inquiry Where to buy Suppliers range | Cocoamidopropyl Hydroxysultaine, commonly referred to as Coconut Oil or Coconut-derived Surfactant, is a mild amphoteric surfactant that is used as a cleansing agent in personal care products, such as shampoos, body washes, and facial cleansers. It is derived from coconut oil and is known for its exceptional foaming and stabilizing properties. Coconut Oil is known for its moisturizing and conditioning properties, which makes it suitable for use in products that target dry or damaged hair and skin. Its mild nature makes it a gentle cleansing agent that is less likely to cause irritation or dryness compared to other more aggressive surfactants. Additionally, it is biodegradable, making it an excellent environmentally friendly option for formulators. Uses: 1. Cocoamidopropyl Hydroxysultaine is used as a surfactant and foam booster in shampoos, liquid soaps, body washes, and other personal care products. 2. It is used as a mild cleansing agent that helps to remove dirt and oil from the skin and hair. 3. Cocoamidopropyl Hydroxysultaine has conditioning properties that can help to soothe and moisturize the skin and hair. 4. It is used in baby care products due to its gentle nature. 5. Cocoamidopropyl Hydroxysultaine is often used as a co-surfactant in combination with other surfactants to increase foaming and cleaning power. 6. It helps to improve the texture and viscosity of formulations. 7. Cocoamidopropyl Hydroxysultaine has a natural origin (made from coconut oil), which makes it a suitable ingredient for natural and organic products. Group: Mild Sulfate Free Amphoteric. CAS No. 68139-30-0. Product ID: ACM68139300-5. Appearance: clear to slightly yellow liquid that has a faint odor. | |
Coco Glucoside Quick inquiry Where to buy Suppliers range | Coco glucoside is a popular and mild surfactant derived from coconut oil and glucose that is used in personal care and household cleaning products. It is known for its gentle cleansing properties, ability to create a rich lather, and its mildness on the skin, making it suitable for sensitive skin types. Coco glucoside is also biodegradable, environmentally-friendly, and has a low potential for irritation. Because of its natural origin and effectiveness, it is commonly used in various personal care products such as facial cleansers, body washes, shampoos, and conditioners. Moreover, it is used in household cleaning products such as dishwashing liquids and surface cleaners. Uses: 1. Coco Glucoside is commonly used as a gentle surfactant in personal care and cosmetic products. 2. It is used in hair care products like shampoos, conditioners, and hair styling products as it provides a gentle cleansing action, reduces static, and improves manageability. 3. It is also used in skin care products like cleansers, body washes, and face washes, as it effectively removes dirt and impurities without stripping away natural oils from the skin. 4. Coco Glucoside is an effective ingredient in baby care products, herbal shampoos, and pet shampoos, as it is gentle on sensitive skin. 5. It has good biodegradability and is eco-friendly, making it suitable for use in organic and natural formulations. 6. Coco Glucoside can also be used in household and industrial applications such as detergent formulations, car wash, and cleaning products. Group: Natural Nonionics Alkylpolyglucosides. CAS No. 1613372-14-7. Product ID: ACM1613372147. Appearance: pale yellow to amber-colored liquid or solid material with a slightly sweet odor. | |
Ethoxydiglycol Quick inquiry Where to buy Suppliers range | Ethoxylated alcohol that is widely used as solubilizer, solvent carrier, fragrance enhancer, humectant, co-solvent and viscosity decreasing agent. Synonym: 2-(2-Ethoxyethoxy)ethanol. Uses: Skin & hair care products including self-tanning products, sunscreens, antiperspirants, fragrances antimicrobial soaps & nail polish removers, conditioners, hair dyes, products for blemished skin. Group: Humectants. CAS No. 111-90-0. Product ID: ACM111900-3. Appearance: Colorless, clear liquid, fruity odor. | |
Glyceryl Linoleate Quick inquiry Where to buy Suppliers range | Glyceryl Linoleate is a derivative of Linoleic Acid, which is a type of omega-6 fatty acid found in plant oils. Glyceryl Linoleate is a skin conditioning agent and emollient that improves skin hydration and texture. It also helps to restore the skin's natural barrier function, which can be disrupted by environmental stressors and aging. Glyceryl Linoleate is commonly used in skin care products, such as moisturizers and anti-aging creams, and is suitable for all skin types. Uses: 1. Moisturizer: Glyceryl linoleate is used as an emollient in various skincare products like lotions, creams, and moisturizers. It helps to keep the skin hydrated by preventing water loss and enhancing moisture retention. 2. Anti-aging: Glyceryl linoleate has antioxidant properties that fight against free radicals and protect the skin from damage caused by environmental stressors. It helps to reduce the appearance of fine lines, wrinkles, and other signs of aging. 3. Hair conditioner: Glyceryl linoleate is used as a conditioning agent in hair care products like shampoos and conditioners. It helps to improve the texture of the hair, making it softer and more manageable. 4. Cleanser: Glyceryl linoleate is used in cleansers to help remove dirt, oil, and impurities from the skin without stripping it of its natural oils. It also helps to protect the skin from further damage caused by harsh cleansers. 5. Sunscreen: Glyceryl linoleate is used in sunscreen formulations to improve the spreadability and effectiveness of the product. It helps to protect the skin from harmful UV rays and reduces the risk of sunburn and skin damage. Group: Solubilizer. CAS No. 2277-28-3. Product ID: ACM2277283-3. Appearance: clear, colorless to pale yellow liquid with a mild, slightly fatty odor. | |
Hydrated Silica Quick inquiry Where to buy Suppliers range | Hydrated Silica is a form of silicon dioxide that is used in a number of personal care and cosmetic products. It provides mild abrasion properties that can exfoliate the face properly and aid in the removal of dead skin cells. Hydrated Silica can commonly be found in toothpaste, exfoliating body washes, and facial scrubs. It is also a thickening and viscosity-controlling agent that improves the feel and texture of the products that it is used in. The chemical formula of Hydrated Silica is H10O3Si. Uses: 1. Hygiene products - Hydrated silica is commonly used as an abrasive agent in toothpaste, as it helps in removing stains from teeth without damaging the enamel. 2. Skincare - It is used as an ingredient in exfoliating facial cleansers, as it helps in removing dead skin cells and unclogging pores. 3. Food and Beverages - It is used as a food additive in powdered products, such as coffee creamers, to prevent caking and clumping. 4. Pharmaceuticals - It is used as a flow agent in pharmaceutical tablets to ensure consistent drug delivery and prevent sticking to machinery. 5. Coatings and Polishes - Hydrated silica is used in various coatings and polishes to enhance texture, improve scratch resistance, and increase durability. 6. Agriculture - It is used as a carrier for pesticides and fertilizers to help them spread evenly over crops. Group: Skin Actives. CAS No. 10279-57-9 / 1343-98-2 / 7631-86-9 / 112926-00-8 / 63231-67-4. Product ID: ACM10279579. Appearance: white, odorless, and tasteless powder. | |
Isohexadecane Quick inquiry Where to buy Suppliers range | Branched hydrocarbon dry-finish emollient that leaves a light silky feeling on the skin. Uses: Face creams, lotions, makeup, face oils, color cosmetics, makeup removers, hair care. Group: Emollients/Oils/Wax. CAS No. 4390-04-9 / 60908-77-2. Product ID: ACM4390049-2. Appearance: Clear, odorless liquid. | |
Isopropyl Isostearate Quick inquiry Where to buy Suppliers range | Fatty ester derived from renewable vegetable oils. Offers good moisturizing, long-lasting and lubricious skin feel. It is a good solvent for makeup removers and foundations. It is used as a binder for decorative cosmetics. Offers excellent low temperature properties and exhibit good oxidative stability, due to the saturated and branched molecular structure. Remarkably high miscibility and compatibility in a wide range of formulations with ester oils, silicone-based emulsifiers and color pigments. Saponification value: 160-180. Uses: Skin and hair care products, color cosmetics. Group: Surfactants/Emulsifiers. Alternative Names: Isopropyl 16-methylheptadecanoate. Grades: 96%. CAS No. 68171-33-5. Product ID: ACM68171335-2. Molecular formula: C21H42O2. Mole weight: 326.6. IUPAC Name: Propan-2-yl 16-methylheptadecanoate. Appearance: Clear liquid, slightly fatty odor. Density: 0.876 g/mL. SMILES: CC(C)CCCCCCCCCCCCCCC(=O)OC(C)C. | |
Moisturizing Facial Toner Base Quick inquiry Where to buy Suppliers range | Deeply moisturizing toner that helps balance the skin's pH, minimizing the appearance of pores, and removing dirt residuals. Ideal to use after each cleansing and before applying creams or lotions. pH balanced (4.2-5.8). Group: Cosmetic Base. Product ID: ACMA00029433. Appearance: Clear liquid, bland odor. | |
Olea Europaea (olive) Fruit Oil Quick inquiry Where to buy Suppliers range | Olea Europaea (olive) Fruit Oil is a natural oil that is derived from the fruit of the olive tree. It is commonly used in various beauty products, such as skin and hair care products, due to its numerous benefits. Some of the benefits of Olea Europaea (olive) Fruit Oil include its ability to moisturize and nourish the skin, leaving it soft and supple. It also has anti-inflammatory properties that can help to reduce redness and irritation in the skin, making it an ideal ingredient for those with sensitive skin. Additionally, it contains antioxidants that can help to protect the skin from harmful free radicals that can cause premature aging and other damage. Uses: 1. Moisturizing: Olive oil is an excellent moisturizer and helps hydrate and soften the skin. 2. Anti-aging: It contains antioxidants that protect the skin from damage caused by free radicals and help delay the signs of aging. 3. Cleansing: Olive oil has cleansing properties and can be used as a natural makeup remover or cleanser. 4. Healing: It has anti-inflammatory and antibacterial properties which help in wound healing and preventing infections. 5. Hair care: Olive oil can be used as a hair mask to nourish and condition the hair, and also help prevent hair fall. Group: Skin Actives. CAS No. 8001-25-0. Product ID: ACM8001250-3. Appearance: yellowish-green, thick, and oily liquid with a characteristic fruity odor. | |
Salicylic Acid, USP Quick inquiry Where to buy Suppliers range | Organic beta hydroxy acid (chemical name: 2-hydroxybenzoic acid), occurs naturally in various plants. Melting Point: 159°C (318°F). Uses: Peels and exfoliant products. Anti-acne products (max. 2%). Anti-dandruff products (max 3%). Wart-removing products (max. concentration depends on type of plaster vehicle used). Group: Skin Actives. CAS No. 69-72-7. Product ID: ACM69727-2. Appearance: Fine, white powder, odorless. | |
Sodium Cocoyl Glycinate Quick inquiry Where to buy Suppliers range | Sodium Cocoyl Glycinate (SCG) is a surfactant that is derived from the natural sources of coconut oil and glycine. It is a mild, non-irritating, and non-toxic surfactant that is commonly used in the formulation of personal care and cosmetic products. Uses: 1. Sodium Cocoyl Glycinate is a widely used surfactant in personal care products like shampoos, body washes, and facial cleansers due to its excellent foaming and cleansing properties. 2. It is a mild, non-irritating, and non-drying surfactant that effectively removes dirt, oil, and impurities from the skin and hair without stripping off natural oils. 3. Sodium Cocoyl Glycinate is also used as a skin conditioning agent that helps to improve skin texture, moisturization, and reduce transepidermal water loss. 4. Due to its biodegradability and eco-friendliness, Sodium Cocoyl Glycinate is a preferred choice over traditional surfactants that pose a threat to the environment. 5. It is also used in the formulation of oral care products like toothpaste and mouthwash as a foaming agent and flavor enhancer. Group: Mild Sulfate Free Anionics. CAS No. 90387-74-9. Product ID: ACM90387749-2. Appearance: pale yellow liquid or powder with a mild odor. | |
Sodium Cocoyl Isethionae Quick inquiry Where to buy Suppliers range | Sodium Cocoyl Isethionate (SCI) is an anionic surfactant, which means it is a type of detergent or cleaning agent. It is derived from coconut oil and is commonly used in personal care products such as shampoos, soaps, and cleansers to create a lather and remove dirt and oils from the skin and hair. SCI is considered to be a gentle surfactant due to its small molecular structure and relatively low irritancy potential. It is also biodegradable, making it an environmentally friendly option for personal care products. In addition to its cleansing properties, SCI can also act as a skin conditioning agent, helping to moisturize and soothe the skin. Uses: 1. Sodium Cocoyl Isethionate is commonly used as a mild surfactant and a primary cleansing agent in various personal care and hygiene products. 2. It provides gentle cleansing and produces rich, creamy lather in formulations such as shampoos, body washes and facial cleansers. 3. Sodium Cocoyl Isethionate is also known for its skin conditioning properties, which help to enhance skin moisturization and improve texture. 4. It is well-tolerated by sensitive and allergic skin types, making it a popular ingredient in hypoallergenic and dermatologically tested products. 5. Sodium Cocoyl Isethionate is biodegradable and environmentally friendly, making it an ideal choice for sustainable and eco-friendly formulations. Group: Performance Blends. CAS No. 61789-32-0. Product ID: ACM61789320-2. Appearance: white or cream colored powder with a mild odor. | |
Sodium Lauroamphoacetate (66161-62-4) Quick inquiry Where to buy Suppliers range | Sodium Lauroamphoacetate is a surfactant commonly used in personal care and cosmetic products as a detergent, emulsifier, and foaming agent. It is derived from coconut oil and is considered gentle to the skin and hair. It helps to cleanse the skin and hair by creating a lather that helps to remove dirt and oil. Additionally, Sodium Lauroamphoacetate is often used in cleansers and other skincare products as it is less likely to cause irritation or allergic reactions compared to other harsher surfactants. Uses: 1. Sodium Lauroamphoacetate is used as a surfactant. 2. It is commonly used in personal care products such as shampoos, bubble baths, and cleansing gels due to its mildness and ability to create foam. 3. It can aid in the removal of dirt and oils from the skin and hair. 4. It can help emulsify oils and water-based ingredients. 5. It can improve the texture and feel of a product by creating a smoother and more luxurious texture. 6. It can also be used as a foaming agent in cleaning products, such as dishwashing detergents or general-purpose cleaners. Group: Mild Sulfate Free Amphoteric. CAS No. 66161-62-4. Product ID: ACM66161624-1. Appearance: clear to pale yellow liquid with a slightly sweet odor. | |
Sodium Laurylglucoside Hydroxpropylsulfonate Quick inquiry Where to buy Suppliers range | Sodium Laurylglucoside Hydroxpropylsulfonate (also known as SLSGHS) is a surfactant commonly used in personal care products, such as shampoos, body washes, and facial cleansers. It is derived from natural and renewable raw materials such as coconut oil and corn glucose. Uses: 1. Sodium Laurylglucoside Hydroxpropylsulfonate is commonly used as a foaming agent in personal care and household products, such as shampoo, hand soap, dish soap, and laundry detergent. 2. It is also used as an emulsifier in cosmetics to help mix oil and water-based ingredients. 3. This surfactant is often used as a substitute for harsher sulfates, as it is biodegradable, milder on the skin, and does not contribute to environmental pollution. 4. Sodium Laurylglucoside Hydroxpropylsulfonate has excellent cleansing properties, helping to remove oils, dirt, and other impurities from hair and skin. Group: Mild Sulfate Free Anionics. CAS No. 742087-49-6. Product ID: ACM742087496. Appearance: clear, colorless or slightly yellow liquid with a mild odor. | |
Sodium Laurylglucosides Hydroxypropylsulfonate Quick inquiry Where to buy Suppliers range | Sodium Laurylglucosides is a surfactant that is commonly used in personal care and household cleaning products. It is a mild, plant-derived surfactant that is made from renewable raw materials such as corn and coconut, making it a more environmentally friendly option. When added to a product, Sodium Laurylglucosides helps to create a foaming or lathering effect, which can make products more effective at removing dirt and oils. It is commonly found in products such as shampoos, body washes, facial cleansers, and dish soaps. Uses: 1. Sodium Laurylglucosides is a surfactant widely used in personal care products such as shampoo, body wash, and facial cleansers. 2. It is a mild cleansing agent, gentle on skin and hair, and does not cause irritation or dryness. 3. Sodium Laurylglucosides is also used in household cleaning products such as dishwashing liquids, laundry detergents, and surface cleaners. 4. Due to its eco-friendly and biodegradable properties, Sodium Laurylglucosides is becoming a popular choice in natural and organic products. 5. It is also used in the formulation of insecticides and herbicides as a wetting agent. 6. Sodium Laurylglucosides has anti-microbial properties, which makes it useful in the formulation of hand sanitizers and disinfectants. 7. It is a non-toxic and non-irritating compound, making it safe for use in various cosmetic and cleaning products. Group: Performance Blends. CAS No. 742087-49-6. Product ID: ACM742087496-1. Appearance: clear to pale yellow liquid or a crystalline solid with a slightly sweet odor. | |
Tin(II) chloride dihydrate Quick inquiry Where to buy Suppliers range | colorless to white, odorless solid. Uses: Powerful reducing agent, particularly in manufacture of dyes and 99mTc radiopharmaceuticals; in tinning by galvanic methods; in liquor finishing of wire; in sensitizing of glass and plastics before metallizing; as soldering flux; as mordant in dyeing with cochineal; in manufacture of tin chemicals, color pigments, pharmaceuticals, sensitized paper, lubricating oil additives; as tanning agent; in removing ink stains; in yeast revivers; as reagent in analytical chemistry; as catalyst in organic reactions. Group: Organic Tin. Alternative Names: SALT OF TIN;STANNOUS CHLORIDE;STANNOUS CHLORIDE 2H2O;STANNOUS CHLORIDE 2-HYDRATE;STANNOUS CHLORIDE DIHYDRATE;TIN CHLORIDE, DIHYDRATE;TIN(II) CHLORIDE;TIN(II) CHLORIDE-2-HYDRATE. Grades: min 97.50 %. CAS No. 10025-69-1. Molecular formula: SnCl2 · 2H2O. Mole weight: 225.65. IUPAC Name: dichlorotin dihydrate. Exact Mass: 225.86100. Boiling Point: 652ºC. Melting Point: 37-38ºC. Density: 2.71. InChIKey: FWPIDFUJEMBDLS-UHFFFAOYSA-L. H-Bond Donor: 2. H-Bond Acceptor: 2. Safty Description: S26-S36/37/39-S45. Hazard statements: C: Corrosive. |