Rubber Chemical Suppliers USA
Find where to buy products from suppliers in the USA, including: distributors, industrial manufacturers in America, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the American suppliers website for prices, SDS or more information. You can also view suppliers in Australia, NZ or the UK.
Product | Description | |
---|---|---|
1,3-Butadiene (ca. 15% in Hexane) Quick inquiry Where to buy Suppliers range | 1,3-Butadiene (ca. 15% in Hexane). Uses: Butadiene is a colorless gas with an aromatic odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, it may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals.;GasVapor; Liquid; OtherSolid, GasVapor; OtherSolid, Liquid;Liquid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;Colorless gas with a mild aromatic or gasoline-like odor.;Colorless gas with a mild aromatic or gasoline-like odor. [Note: A liquid below 24°F. Shipped as a liquefied compressed gas.]. Group: Monomers. CAS No. 106-99-0. IUPAC Name: buta-1,3-diene. Molecular Weight: 54.09g/mol. Molecular Formula: C4H6;CH2=(CH)2=CH2;CH2CHCHCH2;C4H6. SMILES: C=CC=C. InChI: InChI=1S/C4H6/c1-3-4-2/h3-4H,1-2H2. InChIKey: KAKZBPTYRLMSJV-UHFFFAOYSA-N. Boiling Point: 24.1 °F at 760 mm Hg (NTP, 1992);-4.4 ?;-4.5 ?;-4 ?;24°F;24°F. Melting Point: -164 °F (NTP, 1992);-108.9 ?;-108.966 ?;-108.9?;-109 ?;-164°F;-164°F. Flash Point: -105 °F (NTP, 1992);Gas;-76 ? c.c.;-105°F;NA (Gas) -105°F (Liquid). Density: 0.621 at 68 °F (USCG, 1999);0.6149 g/cu cm at 25 ?;Relative density (water = 1): 0.6;0.621 at 68°F;0.65 (Liquid at 24°F);1.88(relative gas density). Solubility: Insoluble (NTP, 1992);0.01 M;In water, 735 mg/L at 20 ?;Slightly soluble in methanol, ethanol; soluble in organic solvents such as carbon tetrachloride; alcohol dissolves about 40 vols at room temp.;Soluble in ethanol, ether, benzene; very soluble in acetone;0.735 mg/mL at 25 ?;Solubility in water, g/100ml: 0.1 (none);Insoluble. Viscosity: Gas at 101.325 kPa at 20 ?: 0.00754 cP; Liquid at -40 ?: 0.33 cP. | |
1,3-Butadiene (ca. 15% in Toluene) Quick inquiry Where to buy Suppliers range | 1,3-Butadiene (ca. 15% in Toluene). Uses: Butadiene is a colorless gas with an aromatic odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, it may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals.;GasVapor; Liquid; OtherSolid, GasVapor; OtherSolid, Liquid;Liquid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;Colorless gas with a mild aromatic or gasoline-like odor.;Colorless gas with a mild aromatic or gasoline-like odor. [Note: A liquid below 24°F. Shipped as a liquefied compressed gas.]. Group: Monomers. CAS No. 106-99-0. IUPAC Name: buta-1,3-diene. Molecular Weight: 54.09g/mol. Molecular Formula: C4H6;CH2=(CH)2=CH2;CH2CHCHCH2;C4H6. SMILES: C=CC=C. InChI: InChI=1S/C4H6/c1-3-4-2/h3-4H,1-2H2. InChIKey: KAKZBPTYRLMSJV-UHFFFAOYSA-N. Boiling Point: 24.1 °F at 760 mm Hg (NTP, 1992);-4.4 ?;-4.5 ?;-4 ?;24°F;24°F. Melting Point: -164 °F (NTP, 1992);-108.9 ?;-108.966 ?;-108.9?;-109 ?;-164°F;-164°F. Flash Point: -105 °F (NTP, 1992);Gas;-76 ? c.c.;-105°F;NA (Gas) -105°F (Liquid). Density: 0.621 at 68 °F (USCG, 1999);0.6149 g/cu cm at 25 ?;Relative density (water = 1): 0.6;0.621 at 68°F;0.65 (Liquid at 24°F);1.88(relative gas density). Solubility: Insoluble (NTP, 1992);0.01 M;In water, 735 mg/L at 20 ?;Slightly soluble in methanol, ethanol; soluble in organic solvents such as carbon tetrachloride; alcohol dissolves about 40 vols at room temp.;Soluble in ethanol, ether, benzene; very soluble in acetone;0.735 mg/mL at 25 ?;Solubility in water, g/100ml: 0.1 (none);Insoluble. Viscosity: Gas at 101.325 kPa at 20 ?: 0.00754 cP; Liquid at -40 ?: 0.33 cP. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (100) orientation Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (100) orientation. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (110) orientation, ±2° Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (110) orientation, ±2°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (111) orientation, ±2° Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, (111) orientation, ±2°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, random orientation Quick inquiry Where to buy Suppliers range | Aluminum single crystal, 15mm (0.59in) dia, 50mm (2.0in) long, random orientation. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (100) orientation Quick inquiry Where to buy Suppliers range | Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (100) orientation. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (110) orientation ±0.5° Quick inquiry Where to buy Suppliers range | Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (110) orientation ±0.5°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (111) orientation, ±0.5° Quick inquiry Where to buy Suppliers range | Aluminum single crystal disc, 10mm (0.39in) dia, 1-3mm (0.04-0.1in) thick, (111) orientation, ±0.5°. Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Single Crystals. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 3.175mm (0.125in) dia x 3.175mm (0.125in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 3.175mm (0.125in) dia x 3.175mm (0.125in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 3.175mm (0.125in) dia x 6.35mm (0.25in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 3.175mm (0.125in) dia x 6.35mm (0.25in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 6.35mm (0.25in) dia x 12.7mm (0.50in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 6.35mm (0.25in) dia x 12.7mm (0.50in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum slug, 6.35mm (0.25in) dia x 6.35mm (0.25in) length, 99.99% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum slug, 6.35mm (0.25in) dia x 6.35mm (0.25in) length, 99.99% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Metal. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
Aluminum sputtering target, 50.8mm (2.0in) dia x 3.18mm (0.125in) thick, 99.999% (metals basis) Quick inquiry Where to buy Suppliers range | Aluminum sputtering target, 50.8mm (2.0in) dia x 3.18mm (0.125in) thick, 99.999% (metals basis). Uses: Aluminum powder, coated appears as a light gray or silver powdered metal. Easily ignited; burns with an intense flame.;Aluminum powder, pyrophoric appears as a light gray or silvery colored powdered metal.;Aluminum powder, uncoated appears as a light gray solid. Denser than water. Contact may burn skin, eyes, and mucous membranes. May be toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.;Aluminum metal held above melting point of 1220°F (660?) for ease in handling. Cools and solidifies if released. Contact causes thermal burns. Plastic or rubber may melt or lose strength upon contact. Protective equipment designed for chemical exposure only is not effective against direct contact. Take care walking on the surface of a spill to avoid stepping into a pocket of molten aluminum below the crust. Do not attempt to remove aluminum impregnated clothing because of the danger of tearing flesh if there has been a burn.;DryPowder; DryPowder, OtherSolid; DryPowder, PelletsLargeCrystals; DryPowder, PelletsLargeCrystals, WetSolid; DryPowder, WetSolid; Liquid; OtherSolid; OtherSolid, Liquid; PelletsLargeCrystals; WetSolid;A silvery-grey powder or tiny sheets;Solid;SILVERY-WHITE-TO-GREY POWDER.;Silvery-white, malleable, ductile, odorless metal.;Silvery-white, malleable, ductile, odorless metal. Group: Evaporation Materials. CAS No. 7429-90-5. IUPAC Name: aluminum. Molecular Weight: 26.981538g/mol. Molecular Formula: Al;Al. SMILES: [Al]. InChI: InChI=1S/Al. InChIKey: XAGFODPZIPBFFR-UHFFFAOYSA-N. Boiling Point: 4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);4221 °F at 760 mm Hg (NIOSH, 2016);2327 ?;2327 ?;4221°F;4221°F. Melting Point: 1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);1220 °F (NIOSH, 2016);660 ?;660?;660 ?;1220°F;1220°F. Density: 2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.7 (NIOSH, 2016);2.70;2.7 g/cm³;2.70;2.70. Solubility: Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble (NIOSH, 2016);Insoluble in water and in organic solvents. Soluble in dilute hydrochloric acid.;Soluble in HCl, H2SO4, hot water, and alkalies.;Insoluble in water.;Solubility in water: reaction;Insoluble. | |
C5 hydrocarbon resin for tire rubbers Technical 99.9% Quick inquiry Where to buy Suppliers range | C5 hydrocarbon resin for tire rubbers Technical 99.9%. Group: Chemical Resins. | |
Chlorinated Paraffin (C24H44Cl6) Quick inquiry Where to buy Suppliers range | Chlorinated paraffin (CP) is a complex chemical substance used in multiple applications across diverse industries. It is often used as a flame retardant and secondary plasticizer in rubber, paints, adhesives, caulks, sealants and plastics. Another use is as a coolant or lubricant in metal cutting or forming. Uses: It is mainly used as a flame retardant in conveyer belt, V belts, natural & synthetic rubber. It is mainly used as a plasticizer in formulation of PVC compounds & granules used in wires & cables, PVC windows and door profiles, PVC flooring, films & sheets, PVC foot wears, etc. Used in Polyurethane and Polysulphide based sealants and adhesives. As an extreme pressure additive in metal working fluids / cutting compounds. As a flame retardant in paint industry in the formulation of swimming pool paints and other fire proof paints. Approvals: ISO 9001:2015ISO 14001:2015REACHROHSSVHC. CAS Number: 63449-39-8. Pack Sizes: 250/265Kgs HM HDPE Drums , Flexitank , ISO Tank , IBC. | USA |
CP (Chlorinated Paraffin) Quick inquiry Where to buy Suppliers range | Chlorinated paraffin is a complex chemical compound that is used as a flame retardant, plasticizer, and lubricant in a variety of industrial and consumer products. It is a white or pale yellow, waxy solid that has a strong, chlorine-like odor. Uses: CP is typically used in the production of rubber, plastics, paints, and coatings. It is also used as a flame retardant in textiles, as a lubricant in metalworking fluids, and as a plasticizer in PVC and other polymers. Group: Synthetic. Alternative Names: Chlorinated alkanesChlorinated alkenesChlorinated paraffinsPolychlorinated n-alkanesPolychlorinated n-alkenes. Grades: Technical Grade. CAS No. 85535-85-9. | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -COOH, Particle Size: 100-200nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -COOH, Particle Size: 200-300nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -COOH, Particle Size: 300-400nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -COOH, Particle Size: 400-500nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -COOH, Particle Size: 500-600nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -Epoxy, Particle Size: 100-200nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -Epoxy, Particle Size: 200-300nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -Epoxy, Particle Size: 300-400nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -Epoxy, Particle Size: 400-500nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -Epoxy, Particle Size: 500-600nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -NH2, Particle Size: 100-200nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -NH2, Particle Size: 200-300nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -NH2, Particle Size: 300-400nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -NH2, Particle Size: 400-500nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -NH2, Particle Size: 500-600nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -SiOH, Particle Size: 100-200nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -SiOH, Particle Size: 200-300nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -SiOH, Particle Size: 300-400nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -SiOH, Particle Size: 400-500nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Fe3O4 Magnetic Nanospheres, Matrix: Fe3O4, Surface Group: -SiOH, Particle Size: 500-600nm, Unit: 5mg/ml Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Iron Oxide Nanoparticles Dispersion (Fe2O3, Purity: 99.9 %, Diameter: 20-100nm) Quick inquiry Where to buy Suppliers range | Nano-iron oxide is a new type of nano-material, which can be widely used in coatings, paints, inks and chemical materials and other fields. Because its particle size is only 20-50nm, the particle size is very small, so it has the characteristics of strong ultraviolet absorption, high chroma, high tinting strength, high transparency, and is odorless, temperature resistant, acid and alkali resistant, so it is widely used. Uses: ·For the coloring of various plastics, rubber, ceramics, asbestos products ·Fiber coloring paste, anti-counterfeiting coating, xerography, ink ·Cosmetics industry. ·Powder coating ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 12259-21-1. Molecular Weight: 159.69 g/mol. InChIKey: 3414 °C. Boiling Point: 1565 °C. Melting Point: 3414 °C. Flash Point: 99.9 %. Purity: 5.24 g/cm3. | |
Magnetite Dispersion (Fe3O4, Purity: 99.9%, Diameter: 50-80nm) Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Magnetite Nanoparticles Dispersion (Fe3O4, Purity: 99%, Diameter: 80nm) Quick inquiry Where to buy Suppliers range | Magnetic dispersions are distinguished by good biocompatibility, low toxicity, low sensitivity to oxidative changes, retention of magnetic properties only when exposed to external magnetic fields, and strong ferromagnetic behavior. Magnetic dispersions have shown a wide range of applications, including magnetic recording technology, pigments, catalysis, bioseparation, targeted drug delivery, and many other fields. In medicine, magnetite nanoparticles are used as contrast agents in nuclear magnetic resonance (NMR) studies. Uses: ·Chemicals, plastics, textiles, coatings, rubber, pigments, seals, etc. ·Electronics, electronic packaging materials, ferrite materials, batteries ·Metals, ceramics, nano-ceramics, composite ceramic substrates ·Anti-ultraviolet material, microwave absorbing material ·Biomedical field: magnetic drug carrier, cell separation technology, magnetic hyperthermia materials, etc. ·Magnetic recording material. Group: Metal Oxide Colloids. CAS No. 1317-61-9. Molecular Weight: 231.53 g/cm3. Boiling Point: 1538 °C (lit.). Melting Point: 7 °C. Flash Point: 99.9 %. Purity: 4.8-5.1 g/mL at 25°C (lit.). | |
Mixture Of Bis(3-Triethoxysilylpropyl)Tetrasulfide And Carbon Black Crosile 69C In Tyre Quick inquiry Where to buy Suppliers range | Mixture Of Bis(3-Triethoxysilylpropyl)Tetrasulfide And Carbon Black Crosile 69C In Tyre. Uses: It is used to improve physical and mechanical properties of vulcanizates. Group: Organosilicone. Alternative Names: Mixture Of Bis-[3-(Triethoxysilyl)-Propyl]-Tetrasulfide(50%) And Carbon Black (50%), Silane Carbon Black;Solid Silanex-50S, Hp69C, Jh-S69C, Solid Rubber Silane Solid Silane Corsile 69C Reacts With Fillers Containing Silal Groups During Mixing And With The Polymer During The Vulcanization PrCEss Under Formation Of Covalent Chemical Bonds. This Imparts Better Tensile Strength, Higher Module, Reduced Compression Set, Increased Abrasion Resistance And Optimized Dynamic Properties. It Is Used In Many Applications Where White Fillers Containing Silal Groups Are Involved And Optimum Technical Properties Are Required. Tires: An Excellent Reinforcing Agent In Tires To Reduce Heat Built-Up, Reduce Rolling Resistance And Improve The Tires' Wet Grip. Pack Sizes: Packing: 25kg /bag Storage: Kept in a low temperature, dry and ventilated place, avoid direct sunlight. Shelf life: One year in ventilating, cool and dry area. Product ID: ACMA00021838. | |
Organic Pigments Quick inquiry Where to buy Suppliers range | Organic pigment refers to colored material made of organic compound with pigment properties. Common types include azo pigments, lake pigments, phthalocyanine pigments and quinacridone pigments. They are all artificially synthetic organic compounds. Uses: Used as a colorant in Plastic, Inks, Paint, Rubber, Textile. Approvals: ISO 9001:2015ISO 14001:2015REACH. | USA |
Phosphorus trichloride solution Quick inquiry Where to buy Suppliers range | Phosphorus trichloride solution. Uses: Phosphorus trichloride appears as a colorless or slightly yellow fuming liquid with a pungent and irritating odor resembling that of hydrochloric acid. Causes severe burns to skin, eyes and mucous membranes. Very toxic by inhalation, ingestion and skin absorption. Reacts with water to evolve hydrochloric acid, an irritating and corrosive gas apparent as white fumes. Used during electrodeposition of metal on rubber and for making pesticides, surfactants, gasoline additives, plasticizers, dyestuffs, textile finishing agents, germicides, medicinal products, and other chemicals.;Liquid;COLOURLESS OR YELLOW FUMING LIQUID WITH PUNGENT ODOUR.;Colorless to yellow, fuming liquid with an odor like hydrochloric acid.;Colorless to yellow, fuming liquid with an odor like hydrochloric acid. Group: Electronic Materials. CAS No. 7719-12-2. IUPAC Name: trichlorophosphane. Molecular Weight: 137.33g/mol. Molecular Formula: PCl3;PCl3;Cl3P. SMILES: P(Cl)(Cl)Cl. InChI: InChI=1S/Cl3P/c1-4(2)3. InChIKey: FAIAAWCVCHQXDN-UHFFFAOYSA-N. Boiling Point: 169 °F at 760 mm Hg (EPA, 1998);76.1 ?;76 ?;169°F;169°F. Melting Point: -170 °F (EPA, 1998);-93.6 ?;-112 ?;-170°F;-170°F. Density: 1.574 at 69.8 °F (EPA, 1998);1.574 at 21 ?;Relative density (water = 1): 1.6;1.58;1.58. Solubility: Reacts with water (NIOSH, 2016);Reacts with water, ethanol; soluble in benzene, chloroform, ether;Soluble in carbon tetrachloride;Solubility in water: reaction;Reacts. Viscosity: 0.65 cP at 0 ?; 0.438 cP at 50 ?. | |
Pine Oil (C11H18O) Quick inquiry Where to buy Suppliers range | Pine oils appears as a clear colorless to light amber colored liquid. Contains mainly tertiary and secondary terpene alcohols Produced from the wood of pine trees by extraction or steam distillation. Less dense than water and insoluble in water. Hence floats on water. Vapors are heavier than air. Uses: Pine oil is a natural ingredient of cleaning and disinfectants. The water-based household cleaning compound of pine oil capable of developing to floor cleaning, cleaning spray, disinfecting wipes and disinfectant liquid. Applied for surface maintenance can manufacture to hard surface cleaning, floor wax, and powder. It is used as disinfectant as it contains phenols, which are acidic chemicals that have germ-killing properties. It is used as solvent for many chemicals. Pine oil is used in various industries like paints, protective coatings, cleaning product, adhesives & lubricants. It is used in mining industry, Paper & printing industry and also rubber industry. It is also used as organic herbicide. CAS Number: 8002 09 3. | USA |
Polybutadiene Quick inquiry Where to buy Suppliers range | Polybutadiene. Uses: Butadiene is a colorless gas with an aromatic odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, it may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals.;GasVapor; Liquid; OtherSolid, GasVapor; OtherSolid, Liquid;Liquid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;Colorless gas with a mild aromatic or gasoline-like odor.;Colorless gas with a mild aromatic or gasoline-like odor. [Note: A liquid below 24°F. Shipped as a liquefied compressed gas.]. Group: Hydrophobic Polymers. CAS No. 9003-17-2. IUPAC Name: buta-1,3-diene. Molecular Weight: 54.09g/mol. Molecular Formula: C4H6;CH2=(CH)2=CH2;CH2CHCHCH2;C4H6. SMILES: C=CC=C. InChI: InChI=1S/C4H6/c1-3-4-2/h3-4H,1-2H2. InChIKey: KAKZBPTYRLMSJV-UHFFFAOYSA-N. Boiling Point: 24.1 °F at 760 mm Hg (NTP, 1992);-4.4 ?;-4.5 ?;-4 ?;24°F;24°F. Melting Point: -164 °F (NTP, 1992);-108.9 ?;-108.966 ?;-108.9?;-109 ?;-164°F;-164°F. Flash Point: -105 °F (NTP, 1992);Gas;-76 ? c.c.;-105°F;NA (Gas) -105°F (Liquid). Density: 0.621 at 68 °F (USCG, 1999);0.6149 g/cu cm at 25 ?;Relative density (water = 1): 0.6;0.621 at 68°F;0.65 (Liquid at 24°F);1.88(relative gas density). Solubility: Insoluble (NTP, 1992);0.01 M;In water, 735 mg/L at 20 ?;Slightly soluble in methanol, ethanol; soluble in organic solvents such as carbon tetrachloride; alcohol dissolves about 40 vols at room temp.;Soluble in ethanol, ether, benzene; very soluble in acetone;0.735 mg/mL at 25 ?;Solubility in water, g/100ml: 0.1 (none);Insoluble. Viscosity: Gas at 101.325 kPa at 20 ?: 0.00754 cP; Liquid at -40 ?: 0.33 cP. | |
Polybutadiene, cis Quick inquiry Where to buy Suppliers range | Polybutadiene, cis. Uses: Butadiene is a colorless gas with an aromatic odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, it may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals.;GasVapor; Liquid; OtherSolid, GasVapor; OtherSolid, Liquid;Liquid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;Colorless gas with a mild aromatic or gasoline-like odor.;Colorless gas with a mild aromatic or gasoline-like odor. [Note: A liquid below 24°F. Shipped as a liquefied compressed gas.]. Group: Hydrophobic Polymers. CAS No. 9003-17-2. IUPAC Name: buta-1,3-diene. Molecular Weight: 54.09g/mol. Molecular Formula: C4H6;CH2=(CH)2=CH2;CH2CHCHCH2;C4H6. SMILES: C=CC=C. InChI: InChI=1S/C4H6/c1-3-4-2/h3-4H,1-2H2. InChIKey: KAKZBPTYRLMSJV-UHFFFAOYSA-N. Boiling Point: 24.1 °F at 760 mm Hg (NTP, 1992);-4.4 ?;-4.5 ?;-4 ?;24°F;24°F. Melting Point: -164 °F (NTP, 1992);-108.9 ?;-108.966 ?;-108.9?;-109 ?;-164°F;-164°F. Flash Point: -105 °F (NTP, 1992);Gas;-76 ? c.c.;-105°F;NA (Gas) -105°F (Liquid). Density: 0.621 at 68 °F (USCG, 1999);0.6149 g/cu cm at 25 ?;Relative density (water = 1): 0.6;0.621 at 68°F;0.65 (Liquid at 24°F);1.88(relative gas density). Solubility: Insoluble (NTP, 1992);0.01 M;In water, 735 mg/L at 20 ?;Slightly soluble in methanol, ethanol; soluble in organic solvents such as carbon tetrachloride; alcohol dissolves about 40 vols at room temp.;Soluble in ethanol, ether, benzene; very soluble in acetone;0.735 mg/mL at 25 ?;Solubility in water, g/100ml: 0.1 (none);Insoluble. Viscosity: Gas at 101.325 kPa at 20 ?: 0.00754 cP; Liquid at -40 ?: 0.33 cP. | |
polybutadiene diacrylate Quick inquiry Where to buy Suppliers range | polybutadiene diacrylate. Uses: Butadiene is a colorless gas with an aromatic odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, it may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals.;GasVapor; Liquid; OtherSolid, GasVapor; OtherSolid, Liquid;Liquid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;Colorless gas with a mild aromatic or gasoline-like odor.;Colorless gas with a mild aromatic or gasoline-like odor. [Note: A liquid below 24°F. Shipped as a liquefied compressed gas.]. Group: Polymers. CAS No. 9003-17-2. IUPAC Name: buta-1,3-diene. Molecular Weight: 54.09g/mol. Molecular Formula: C4H6;CH2=(CH)2=CH2;CH2CHCHCH2;C4H6. SMILES: C=CC=C. InChI: InChI=1S/C4H6/c1-3-4-2/h3-4H,1-2H2. InChIKey: KAKZBPTYRLMSJV-UHFFFAOYSA-N. Boiling Point: 24.1 °F at 760 mm Hg (NTP, 1992);-4.4 ?;-4.5 ?;-4 ?;24°F;24°F. Melting Point: -164 °F (NTP, 1992);-108.9 ?;-108.966 ?;-108.9?;-109 ?;-164°F;-164°F. Flash Point: -105 °F (NTP, 1992);Gas;-76 ? c.c.;-105°F;NA (Gas) -105°F (Liquid). Density: 0.621 at 68 °F (USCG, 1999);0.6149 g/cu cm at 25 ?;Relative density (water = 1): 0.6;0.621 at 68°F;0.65 (Liquid at 24°F);1.88(relative gas density). Solubility: Insoluble (NTP, 1992);0.01 M;In water, 735 mg/L at 20 ?;Slightly soluble in methanol, ethanol; soluble in organic solvents such as carbon tetrachloride; alcohol dissolves about 40 vols at room temp.;Soluble in ethanol, ether, benzene; very soluble in acetone;0.735 mg/mL at 25 ?;Solubility in water, g/100ml: 0.1 (none);Insoluble. Viscosity: Gas at 101.325 kPa at 20 ?: 0.00754 cP; Liquid at -40 ?: 0.33 cP. | |
Polybutadiene, predominantly 1,2-addition Quick inquiry Where to buy Suppliers range | Polybutadiene, predominantly 1,2-addition. Uses: Butadiene is a colorless gas with an aromatic odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, it may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals.;GasVapor; Liquid; OtherSolid, GasVapor; OtherSolid, Liquid;Liquid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;Colorless gas with a mild aromatic or gasoline-like odor.;Colorless gas with a mild aromatic or gasoline-like odor. [Note: A liquid below 24°F. Shipped as a liquefied compressed gas.]. Group: Hydrophobic Polymers. CAS No. 9003-17-2. IUPAC Name: buta-1,3-diene. Molecular Weight: 54.09g/mol. Molecular Formula: C4H6;CH2=(CH)2=CH2;CH2CHCHCH2;C4H6. SMILES: C=CC=C. InChI: InChI=1S/C4H6/c1-3-4-2/h3-4H,1-2H2. InChIKey: KAKZBPTYRLMSJV-UHFFFAOYSA-N. Boiling Point: 24.1 °F at 760 mm Hg (NTP, 1992);-4.4 ?;-4.5 ?;-4 ?;24°F;24°F. Melting Point: -164 °F (NTP, 1992);-108.9 ?;-108.966 ?;-108.9?;-109 ?;-164°F;-164°F. Flash Point: -105 °F (NTP, 1992);Gas;-76 ? c.c.;-105°F;NA (Gas) -105°F (Liquid). Density: 0.621 at 68 °F (USCG, 1999);0.6149 g/cu cm at 25 ?;Relative density (water = 1): 0.6;0.621 at 68°F;0.65 (Liquid at 24°F);1.88(relative gas density). Solubility: Insoluble (NTP, 1992);0.01 M;In water, 735 mg/L at 20 ?;Slightly soluble in methanol, ethanol; soluble in organic solvents such as carbon tetrachloride; alcohol dissolves about 40 vols at room temp.;Soluble in ethanol, ether, benzene; very soluble in acetone;0.735 mg/mL at 25 ?;Solubility in water, g/100ml: 0.1 (none);Insoluble. Viscosity: Gas at 101.325 kPa at 20 ?: 0.00754 cP; Liquid at -40 ?: 0.33 cP. | |
Polybutadiene, predominantly 1,2-addition, approx. 90% 1,2-vinyl Quick inquiry Where to buy Suppliers range | Polybutadiene, predominantly 1,2-addition, approx. 90% 1,2-vinyl. Uses: Butadiene is a colorless gas with an aromatic odor. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. It is easily ignited. Its vapors are heavier than air and a flame can flash back to the source of leak very easily. It can asphyxiate by the displacement of air. It must be shipped inhibited as butadiene is liable to polymerization. If polymerization occurs in the container, it may violently rupture. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. It is used to make synthetic rubber and plastics, and to make other chemicals.;GasVapor; Liquid; OtherSolid, GasVapor; OtherSolid, Liquid;Liquid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;Colorless gas with a mild aromatic or gasoline-like odor.;Colorless gas with a mild aromatic or gasoline-like odor. [Note: A liquid below 24°F. Shipped as a liquefied compressed gas.]. Group: Polymers. CAS No. 9003-17-2. IUPAC Name: buta-1,3-diene. Molecular Weight: 54.09g/mol. Molecular Formula: C4H6;CH2=(CH)2=CH2;CH2CHCHCH2;C4H6. SMILES: C=CC=C. InChI: InChI=1S/C4H6/c1-3-4-2/h3-4H,1-2H2. InChIKey: KAKZBPTYRLMSJV-UHFFFAOYSA-N. Boiling Point: 24.1 °F at 760 mm Hg (NTP, 1992);-4.4 ?;-4.5 ?;-4 ?;24°F;24°F. Melting Point: -164 °F (NTP, 1992);-108.9 ?;-108.966 ?;-108.9?;-109 ?;-164°F;-164°F. Flash Point: -105 °F (NTP, 1992);Gas;-76 ? c.c.;-105°F;NA (Gas) -105°F (Liquid). Density: 0.621 at 68 °F (USCG, 1999);0.6149 g/cu cm at 25 ?;Relative density (water = 1): 0.6;0.621 at 68°F;0.65 (Liquid at 24°F);1.88(relative gas density). Solubility: Insoluble (NTP, 1992);0.01 M;In water, 735 mg/L at 20 ?;Slightly soluble in methanol, ethanol; soluble in organic solvents such as carbon tetrachloride; alcohol dissolves about 40 vols at room temp.;Soluble in ethanol, ether, benzene; very soluble in acetone;0.735 mg/mL at 25 ?;Solubility in water, g/100ml: 0.1 (none);Insoluble. Viscosity: Gas at 101.325 kPa at 20 ?: 0.00754 cP; Liquid at -40 ?: 0.33 cP. | |
Polyisoprene,chlorinated Quick inquiry Where to buy Suppliers range | Polyisoprene,chlorinated. Uses: Isoprene, stabilized appears as a clear colorless liquid with a petroleum-like odor. Density 5.7 lb / gal. Flash point -65°F. Boiling point 93°F. May polymerize exothermically if heated or contaminated. If polymerization takes place inside a closed container, the container may rupture violently. Less dense than water and insoluble in water. Vapors heavier than air.;Liquid; OtherSolid;OtherSolid;VERY VOLATILE COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR. Group: Polymers. CAS No. 68441-58-7. IUPAC Name: 2-methylbuta-1,3-diene. Molecular Weight: 68.12g/mol. Molecular Formula: C5H8;CH2=C(CH3)CH=CH2;C5H8. SMILES: CC(=C)C=C. InChI: InChI=1S/C5H8/c1-4-5(2)3/h4H,1-2H2,3H3. InChIKey: RRHGJUQNOFWUDK-UHFFFAOYSA-N. Boiling Point: 93 °F at 760 mm Hg (NTP, 1992);34.0 ?;34.067 ?;34 ?. Melting Point: -184 °F (NTP, 1992);-145.9 ?;-145.95 ?;The generally accepted crystal melting temperature of natural rubber is 30 ?.;-146 ?. Flash Point: -65 °F (NTP, 1992);-65 °F (-54 ?) (Closed cup). Density: 0.681 at 68 °F (USCG, 1999);0.679 g/cu cm at 20 ?;0.906-0.916 g/cu cm @ 20 ?;Relative density (water = 1): 0.7. Solubility: less than 1 mg/mL at 70.7° F (NTP, 1992);0.01 M;In water, 642 mg/L at 25 ?;Practically insoluble in water;Miscible with ethanol, ethyl ether, acetone, benzene;Soluble in alcohol, ether, hydrocarbon solvents;Natural rubber is soluble in most aliphatic, aromatic, and chlorinated solvents, but its high molecular weight makes it difficult to dissolve.;Practically insol in water, alcohol, dil acids, or alkali; sol in abs ether, chloroform, most fixed or volatile oils, petroleum ether, carbon disulfide, oil of turpentine.;Raw rubber dissolves (or at least swells very strongly) in many organic liquids such as benzene, petroleum ether, crude petroleum, and carbon tetrachloride. In contrast, vulcanized rubber can only swell because the chemical cross-liking prevents dissolution.;Solubility in water, mg/l at 25 ?: 642 (very poor). Viscosity: The viscosity of natural rubber can be stabilized with the addition of small amounts of hydroxylamine hydrochloride or semicarbazide hydrochloride.;0.3 mm2/s at 20-25 ?. | |
precipitated silica (silicon dioxide, SiO2) Quick inquiry Where to buy Suppliers range | Precipitated silica is an amorphous form of silica; it is a white, powdery material. Precipitated silica is produced by precipitation from a solution containing silicate salts. The three main classes of amorphous silica are pyrogenic silica, precipitated silica and silica gel. Uses: Filler, softener and performance improvement in rubber and plastics. Cleaning, thickening and polishing agent in toothpastes for oral health care. Food processing and pharmaceuticals additive as anti-caking, thickening agent, absorbent to make liquids into powders. Food rheology modifier. Defoamer. Approvals: ISO 9001:2015ISO 14001:2015REACH. CAS Number: 7631-86-9. | USA |
Sodium Lignosulfonate Quick inquiry Where to buy Suppliers range | Sodium lignosulfonate (lignosulfonic acid, sodium salt) is used in the food industry as a de-foaming agent for paper production and in adhesives for items that come in contact with food. It has preservative properties and is used as an ingredient in animal feeds. It is also used for construction, ceramics, mineral powder, chemical industry, textile industry (leather), metallurgical industry, petroleum industry, fire-retardant materials, rubber vulcanization, organic polymerization. Uses: Dispersant for concrete additives Plastifying additive for bricks and ceramics Tanning agents Deflocculant Bonding agent for fiberboards Binding agent for molding of pellets, carbon black, fertilizers, activated carbon, foundry molds Dust reduction agent during spraying for non-asphalted roads and dispersion in the agricultural domain. Group: Anionic Surfactants. Alternative Names: ahr2438b; banirexn; betz402; dispergatorreax; dispergatorufoxane; lignosite458; lignosite854; lignosold10. CAS No. 8061-51-6. Product ID: ACM8061516. Molecular formula: C20H24Na2O10S2. Mole weight: 534.5g/mol. IUPAC Name: disodium;(2R)-3-(2-hydroxy-3-methoxyphenyl)-2-[2-methoxy-4-(3-sulfonatopropyl)phenoxy]propane-1-sulfonate. EC Number: 617-124-1. Solubility: Soluble (NTP, 1992). | |
Tetraethoxysilane Quick inquiry Where to buy Suppliers range | Tetraethoxysilane (also known as orthosilicate) is most commonly used as the starting material for sol-gels. Tetraethoxysilane Typical applications: hydrolysis to form silica, crosslinking agent in silicone rubber system, desiccant in sealing composition, inorganic adhesive, used for refractory fillers and pigments, fiber and other surface coatings. Uses: It is mainly used in the manufacture of chemical-resistant and heat-resistant coatings, organosilicon solvents and adhesives for precision casting. Group: Silane Compound; Ethoxysilane; Methoxysilane; Silsesquioxane and Organosilicone. Alternative Names: Ethyl Silicate. Grades: 0.99. Pack Sizes: 10 g; 100 g. Product ID: ACMA00022259. Molecular formula: C8H20O4Si. Mole weight: 208.33 g/mol. Appearance: Transparent liquid. Boiling Point: 166-169 °C. Melting Point: -85 °C. Flash Point: 45 °C. Density: 0.9340±0.0050 g/mL. | |
TETRAMETHYLAMMONIUM HYDROXIDE, SOLUTION 1.0 Mol/L in WATER, REAGENT (ACS) Quick inquiry Where to buy Suppliers range | TETRAMETHYLAMMONIUM HYDROXIDE, SOLUTION 1.0 Mol/L in WATER, REAGENT (ACS). Uses: Industry Application Role/benefit Organic silicon Production of dimethyl silicone oil, organic silicon resin, silicon rubber, etc. Catalyst/removed easily; no pollution to the products Chemical analysis Polarography experiment Polarographic reagent Thermochemolysis to study fungal degradation of wood Analytical reagent Chemical purification Removal of metal elements Ash free alkali/source of base; make the metal elements precipitated Electron Production of computer silicon chip Brightening agent; anisotropic etching agent; cleaning agent; photoresist developer Printing of circuit board Cleaning agent Semiconductor manufacturing Chemical stripper Others Synthesis of ferrofluid Surfactant/ inhibit nanoparticle aggregation Synthesis of zeolite Structure directing agent. Alternative Names: Tetramethylammonium hydroxide solution, ~25% in H2O; tetra methyl ammonium hydroxide; 75-59-2; Tetrametiloamonio hydroxido; Tetramethylammonium hydroxide solution, 25 wt. % in methanol; Tetrametanoamonio hydroxido; A838458; DB-050413; tetramethylammoniumhydroxide; AC1Q29QX. CAS No. 75-59-2. Product ID: ACM75592. Molecular formula: C4H13NO. Mole weight: 91.154g/mol. IUPAC Name: tetramethylazanium;hydroxide. Solubility: In water, 1.0X10+6 mg/L at 25 deg C /miscible/ (est). Density: Specific gravity of solution approximately 1.00 at 24 deg C/4 deg C. SMILES: C[N+](C)(C)C.[OH-]. InChI: InChI=1S/C4H12N.H2O/c1-5(2,3)4;/h1-4H3;1H2/q+1;/p-1. InChIKey: WGTYBPLFGIVFAS-UHFFFAOYSA-M. |