A directory of where to buy chemicals in the USA, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices or more information.
| Product | Description | |
|---|---|---|
| Polysorbate 20 | Polysorbate 20 is commonly used as a membrane protein solubilizing non-ionic surfactant. Synonyms: Tween 20; Ahco 7596T; Nissa. Grades: 98%+. CAS No. 9005-64-5. Molecular formula: C32H60O10. Mole weight: 522.7. |  |
| Polysorbate 20 | This product is an amber viscous liquid with a slight special odor and slightly bitter taste. Synonyms: Tween 20; Polyoxyethylene sorbitan laurate; Polyoxyethylene sorbitan laurate; Polyoxyethylene sorbitan monolaurate; Emulsifier T-20; Polyoxyethylene (20) Sorbitan Alcohol monolaurate; Polysorbate 20. CAS No. 9005-64-5. Product ID: PE-0063. Molecular formula: C58H114O26. Mole weight: 1127.48. Category: Surfactant; Emulsifier; Solubilizer; Humectants. Product Keywords: Humectants Excipients; Emulsifier Excipients; Surfactant Excipients; Solubilizer Excipients; PE-0063; Polysorbate 20; Surfactant; Emulsifier; Solubilizer; Humectants; C58H114O26; 9005-64-5. UNII: 7T1F30V5YH. Chemical Name: Polyoxyethylene 20 sorbitan monolaurate. Grade: Pharmceutical Excipients. Administration route: Oral, intravenous, subcutaneous, topical. Dosage Form: Intramuscular injection, intravenous injection, oral, topical, rectal, vaginal preparations. Stability and Storage Conditions: Polysorbate is stable to electrolytes, weak acids and weak bases; it will gradually saponify in case of strong acids and strong bases. Its oleate is susceptible to oxidation. Polysorbate is hygroscopic, check its moisture content before use, and dry if necessary. Polysorbate, like other polyoxyethylene surfactants, will produce peroxides when stored for too long. Polysorbate should be stored in a sealed container, away from light, in a cool and dry place. Comm |  |
| Polysorbate 20 | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. |  |
| Polysorbate 20 | Polysorbate 20 is a great stabilizer and emulsifier in a variety of food products and also in industrial applications. It is non-ionic and used to make oil in water emulsions. Uses: Emulsifier and stabilizer for food preparations, Oil in water emulsification. Alternative Names: POE (20) Sorbitan Monooleate, Polyoxyethylene (20) Sorbitan Monooleate, Polysorbate 20. Grades: Food. CAS No. 9005-64-5. Pack Sizes: 5 Gal Pail, 55 Gal Drums. |  USA |
| Polysorbate 20 & 80 | Polysorbate 20 & 80. Market: Cosmetics & Personal Care, Food Additives / Preservatives. PK Chem Industries: We supply chemicals related to Cosmetic, Personal Care, Food, Pharmaceutical, Feed, Agriculture and Mining Industries. |  |
| Polysorbate 20 USP | Tween® 20 Sorbitan monolaurate. Grades: USP. CAS No. 9005-64-5. Product ID: 8-01150. |  |
| Polysorbate 40 | Tween 40. blood volume expander. Grades: NF. CAS No. 9005-66-7. Product ID: 8-01525. Molecular formula: Mole weight: 1283.65. Reference: Can. J. Anaesth., 7, 1207, 2000; Br. J. Anaesth., 2, 510, 1999. MFCD No. MFCD00165345. | |
| Polysorbate 40 | Polysorbate 40. Group: Biochemicals. Alternative Names: Crill 7; Crillet 2; Durfax 60; E 434; Emsorb 6910; Emulgen TWP 120; Ethoxylated Sorbitan Monopalmitate; Glycosperse P 20; Kotilen P 1; Lonzest SMP 20; MP 55F; Montanox 40; Nikkol TP 10; Nikkol TP 10EX; Nikkol TP 10V; Nissan Nonion PT 221; Polyethylene Glycol Sorbitan Monohexadecanoate; Polyethylene Glycol Sorbitan Monopalmitate; Polyethylene glycol-sorbitan Monopalmitate Adduct; Polyethylene Sorbitan Monopalmitate; Polyoxyethylene sorbitan monohexadecanoate; Polyoxyethylene Sorbitan Monopalmitate; Rheodol Super TW-P 120; Rheodol TW-P 120; Rheodol TW-P 120V; Sorbimacrogol Palmitate 300; Sorbitan Monopalmitate Polyethylene Glycol Ether; Sorbitan Polyethoxy Monopalmitate; Sorbon T 40; TP 10EX; Tween 40. Grades: Highly Purified. CAS No. 9005-66-7. Pack Sizes: 1g. US Biological Life Sciences. |  Worldwide |
| Polysorbate 40 | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polysorbate 40 | This product is an amber oily liquid. Synonyms: Tween40; sorbitan monohexadecanoate; polysorbatum 40; Poly(oxy-1, 2-ethanediyl) derivs. CAS No. 9005-66-7. Product ID: PE-0064. Molecular formula: C62H122O26. Mole weight: 1284.6. Category: Surfactant; Emulsifier; Solubilizer; Humectants. Product Keywords: Humectants Excipients; Emulsifier Excipients; Surfactant Excipients; Solubilizer Excipients; PE-0064; Polysorbate 40; Surfactant; Emulsifier; Solubilizer; Humectants; C62H122O26; 9005-66-7. UNII: STI11B5A2X. Chemical Name: Polyoxyethylene 20 sorbitan monolaurate. Grade: Pharmceutical Excipients. Administration route: Oral. Dosage Form: Intramuscular injection, intravenous injection, oral, topical, rectal, vaginal preparations. Stability and Storage Conditions: Polysorbate is stable to electrolytes, weak acids and weak bases; it will gradually saponify in case of strong acids and strong bases. Its oleate is susceptible to oxidation. Polysorbate is hygroscopic, check its moisture content before use, and dry if necessary. Polysorbate, like other polyoxyethylene surfactants, will produce peroxides when stored for too long. Polysorbate should be stored in a sealed container, away from light, in a cool and dry place. Commonly used amount and the maximum amount: The World Health Organization has evaluated the acceptable daily intake of polysorbate 20, 40, 60, 65, and 80. Calculated on the basis of total polysorbate, the dai | |
| Polysorbate 40 | Tween40 is a biochemical reagent that can be used as a biological material or organic compound for life science related research. Uses: Scientific research. Group: Biochemical assay reagents. Alternative Names: Polyoxyethylene sorbitan monopalmitate. CAS No. 9005-66-7. Pack Sizes: 25 g. Product ID: HY-W115819. |  |
| Polysorbate 60 | Polysorbate 60. Group: Biochemicals. Grades: Highly Purified. CAS No. 9005-67-8. Pack Sizes: 500g, 1kg. Molecular Formula: C64H126O26. US Biological Life Sciences. | Worldwide |
| Polysorbate 60 | The product is a yellow waxy solid. Synonyms: Tween 60; sorbitan monooctadecanoate poly(oxy-1, 2-ethanediyl) derivatives; polysorbatum 60. CAS No. 9005-67-8. Product ID: PE-0065. Molecular formula: C64H126O26. Mole weight: 1311.68. Category: Surfactant; Emulsifier; Solubilizer; Humectants. Product Keywords: Humectants Excipients; Emulsifier Excipients; Surfactant Excipients; Solubilizer Excipients; PE-0065; Polysorbate 60; Surfactant; Emulsifier; Solubilizer; Humectants; C64H126O26; 9005-67-8. UNII: CAL22UVI4M. Chemical Name: Polyoxyethylene 20 sorbitan monolaurate. Grade: Pharmceutical Excipients. Administration route: Oral, topical, sublingual, rectal, vaginal, urethral. Dosage Form: Intramuscular injection, intravenous injection, oral, topical, rectal, vaginal preparations. Stability and Storage Conditions: Polysorbate is stable to electrolytes, weak acids and weak bases; it will gradually saponify in case of strong acids and strong bases. Its oleate is susceptible to oxidation. Polysorbate is hygroscopic, check its moisture content before use, and dry if necessary. Polysorbate, like other polyoxyethylene surfactants, will produce peroxides when stored for too long. Polysorbate should be stored in a sealed container, away from light, in a cool and dry place. Commonly used amount and the maximum amount: The World Health Organization has evaluated the acceptable daily intake of polysorbate 20, 40, 60, 65, and 80. C | |
| Polysorbate 60 | Polysorbate 60 is commonly used as an emulsifier in food preparation and certain pharmaceuticals. Synonyms: Pegnol T 60. CAS No. 9005-67-8. | |
| Polysorbate 60 | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polysorbate 60, NF | Polysorbate 60, NF. CAS No. 9005-67-8. Product ID: 8-05112. Properties: mixture of stearate and palmitate esters of sorbitol and its anhydrides copolymerized with approximately 20 moles of ethylene oxide for each mole of sorbitol and sorbitol anhydrides. | |
| Polysorbate 60, NF | Tween® 60. antibiotic. Grades: NF. CAS No. 9005-67-8. Product ID: 8-04250. | |
| Polysorbate 60 (Techincal Grade) | Polysorbate 60 is a nonionic surfactant used in the production of biotherapeutic formulations. Group: Biochemicals. Grades: Highly Purified. CAS No. 9005-67-8. Pack Sizes: 1g, 2g. Molecular Formula: N/A. US Biological Life Sciences. | Worldwide |
| Polysorbate 65 | The product is an amber oily viscous liquid. Synonyms: Tween 65; sorbitan rioctadecanoate poly(oxy-1, 2-ethanediyl) derivatives. CAS No. 9005-71-4. Product ID: PE-0523. Molecular formula: C100H194O28. Mole weight: 1844.55. Category: Surfactant; Emulsifier; Solubilizer; Humectants. Product Keywords: Surfactant Excipients; Emulsifier Excipients; Solubilizer Excipients; ; PE-0523; Polysorbate 65; Surfactant; Emulsifier; Solubilizer; Humectants; C100H194O28; 9005-71-4. UNII: NA. Chemical Name: Polyoxyethylene 20 sorbitan monolaurate. Grade: Pharmceutical Excipients. Administration route: Topical. Dosage Form: Intramuscular injection, intravenous injection, oral, topical, rectal, vaginal preparations. Stability and Storage Conditions: Polysorbate is stable to electrolytes, weak acids and weak bases; it will gradually saponify in case of strong acids and strong bases. Its oleate is susceptible to oxidation. Polysorbate is hygroscopic, check its moisture content before use, and dry if necessary. Polysorbate, like other polyoxyethylene surfactants, will produce peroxides when stored for too long. Polysorbate should be stored in a sealed container, away from light, in a cool and dry place. Commonly used amount and the maximum amount: The World Health Organization has evaluated the acceptable daily intake of polysorbate 20, 40, 60, 65, and 80. Calculated on the basis of total polysorbate, the daily intake can be as high as 25 | |
| Polysorbate 80 | Polysorbate 80 is commonly used as a non-ionic detergent for cell lysis. Synonyms: Polyethoxylated Sorbitan Monooleate; Tween 80. Grades: 99%+. CAS No. 9005-65-6. Molecular formula: C32H60O10. Mole weight: 604.8. | |
| Polysorbate 80 | This product is a pale yellow to amber oily viscous liquid. Synonyms: Tween 80; polyoxyethylene 20 oleate; polysorbatum 80; (Z)-sorbitan mono-9-octadecenoate poly(oxy1, 2-ethanediyl) derivatives. CAS No. 9005-65-6. Product ID: PE-0066. Molecular formula: C64H124O26. Mole weight: 1309.63. Category: Surfactant; Emulsifier; Solubilizer; Humectants. Product Keywords: Humectants Excipients; Emulsifier Excipients; Surfactant Excipients; Solubilizer Excipients; PE-0066; Polysorbate 80; Surfactant; Emulsifier; Solubilizer; Humectants; C64H124O26; 9005-65-6. UNII: 6OZP39ZG8H. Chemical Name: Polyoxyethylene 20 sorbitan monolaurate. Grade: Pharmceutical Excipients. Administration route: Intramuscular, intravenous, oral, topical, rectal, vaginal. Dosage Form: Intramuscular injection, intravenous injection, oral, topical, rectal, vaginal preparations. Stability and Storage Conditions: Polysorbate is stable to electrolytes, weak acids and weak bases; it will gradually saponify in case of strong acids and strong bases. Its oleate is susceptible to oxidation. Polysorbate is hygroscopic, check its moisture content before use, and dry if necessary. Polysorbate, like other polyoxyethylene surfactants, will produce peroxides when stored for too long. Polysorbate should be stored in a sealed container, away from light, in a cool and dry place. Commonly used amount and the maximum amount: The World Health Organization has evaluated the a | |
| Polysorbate 80 | Polysorbate 80 CAS: 900565-6 Packing: Plastic Drums |  New Jersey NJ |
| Polysorbate 80 | Polysorbate 80 CAS: 9005-65-6 Packing: Plastic Drums. | New Jersey NJ |
| Polysorbate 80 | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polysorbate 80 BP /USP | Polysorbate 80 BP /USP. CAS No. 9005-65-6. Molecular formula: C64H124O26. |  |
| Polysorbate 80 (Pharmaceutical Grade) | Polysorbate 80 (Pharmaceutical Grade). Group: Polyethylene (pe). CAS No. 9005-65-6. Product ID: 2-[2-[3,4-bis(2-hydroxyethoxy)oxolan-2-yl]-2-(2-hydroxyethoxy)ethoxy]ethyl octadec-9-enoate. CCCCCCCCC=CCCCCCCCC (=O)OCCOCC (C1C (C (CO1)OCCO)OCCO)OCCO. InChI= 1S / C32H60O10 / c1-2-3-4-5-6-7-8-9-10-11-12-13-14-15- 16-17-30 (36) 40-25-24-37-26-28 (38-21-18-33) 32-31 (41-23-20-35) 29 (27-42-32) 39-22-19-34 / h9-10, 28-29, 31-35H, 2-8, 11-27H2, 1H3. HDTIFOGXOGLRCB-UHFFFAOYSA-N. |  |
| Polysorbate 80/Tween 80 | Polysorbate 80/Tween 80. CAS No. 9005-65-6. Product ID: PE-0114. Molecular formula: C64H124O26. Mole weight: 1310. Category: Emulsifier & Suspending Agents. Product Keywords: Pharmaceutical Excipients; Injections & Sterile Formulation; Emulsifier & Suspending Agents; Polysorbate 80/Tween 80; PE-0114; C64H124O26; 9005-65-6; 9005-65-6. Grade: Pharmaceutical Grade. | |
| Polysorbate 80/Tween 80 | Polysorbate 80/Tween 80. CAS No. 9005-65-6. Product ID: PE-0013. Molecular formula: C64H124O26. Mole weight: 1310. Category: Humectants; Dispersion Excipients. Product Keywords: Pharmaceutical Excipients; Liquid Dosage Form; Dispersion Excipients; Polysorbate 80/Tween 80; PE-0013; C64H124O26; 9005-65-6; 9005-65-6. Grade: Pharmaceutical Grade. | |
| Polysorbate 80/Tween 80 | Polysorbate 80/Tween 80. CAS No. 9005-65-6. Product ID: PE-0047. Molecular formula: C64H124O26. Mole weight: 1310. Category: Emulsifier Excipients. Product Keywords: Pharmaceutical Excipients; Liquid Dosage Form; Semi-solid Dosage Form; Suppository Bases;Micro-drug Delivery Systems; Emulsifier Excipients; Polysorbate 80/Tween 80; PE-0047; C64H124O26; 9005-65-6; 9005-65-6. Grade: Pharmaceutical Grade. | |
| Polysorbate 80/Tween 80 | Polysorbate 80/Tween 80. CAS No. 9005-65-6. Product ID: PE-0068. Molecular formula: C64H124O26. Mole weight: 1310. Category: Suspending Agents. Product Keywords: Pharmaceutical Excipients; Liquid Dosage Form; Suspending Agents; Polysorbate 80/Tween 80; PE-0068; C64H124O26; 9005-65-6; 9005-65-6. Grade: Pharmaceutical Grade. | |
| Polysorbate 80/Tween 80 | Polysorbate 80/Tween 80. CAS No. 9005-65-6. Product ID: PE-0183. Molecular formula: C64H124O26. Mole weight: 428.6. Category: Plasticizer Excipients. Product Keywords: Pharmaceutical Excipients; Solid Dosage Form; Semi-solid Dosage Form; Suppository Bases; Plasticizer Excipients; Polysorbate 80/Tween 80; PE-0183; C64H124O26; 9005-65-6; 9005-65-6. Grade: Pharmaceutical Grade. | |
| Polysorbate 80/Tween 80 | Polysorbate 80/Tween 80. CAS No. 9005-65-6. Product ID: PE-0247. Molecular formula: C64H124O26. Mole weight: 428.6. Category: Lubricant Excipients. Product Keywords: Pharmaceutical Excipients; Solid Dosage Form; Lubricant Excipients; Polysorbate 80/Tween 80; PE-0247; C64H124O26; 9005-65-6; 9005-65-6. Grade: Pharmaceutical Grade. | |
| Polysorbate 80 USP | Tween® 80 Sorbitan monooleate. Grades: USP. CAS No. 9005-65-6. Product ID: 8-01149. | |
| Polysorbate 80 USP | copolymer of acrylic acid and a long chain alkyl methacrylate cross-linked with allyl ethers of pentaerythritol. Grades: injectable grade. CAS No. 9005-65-6. Product ID: 8-01635. | |
| Polysorbate 85 | The product is an amber oily viscous liquid. Synonyms: Tween 85; sorbitan tri-9-octadecenoate poly(oxy1, 2-ethanediyl) derivatives. CAS No. 9005-70-3. Product ID: PE-0524. Molecular formula: C100H188O28. Mole weight: 1838.5. Category: Surfactant; Emulsifier; Solubilizer; Humectants. Product Keywords: Surfactant Excipients; Emulsifier Excipients; Solubilizer Excipients; ; PE-0524; Polysorbate 85; Surfactant; Emulsifier; Solubilizer; Humectants; C100H188O28; 9005-70-3. UNII: NA. Chemical Name: Polyoxyethylene 20 sorbitan monolaurate. Grade: Pharmceutical Excipients. Administration route: Topical administration. Dosage Form: Intramuscular injection, intravenous injection, oral, topical, rectal, vaginal preparations. Stability and Storage Conditions: Polysorbate is stable to electrolytes, weak acids and weak bases; it will gradually saponify in case of strong acids and strong bases. Its oleate is susceptible to oxidation. Polysorbate is hygroscopic, check its moisture content before use, and dry if necessary. Polysorbate, like other polyoxyethylene surfactants, will produce peroxides when stored for too long. Polysorbate should be stored in a sealed container, away from light, in a cool and dry place. Commonly used amount and the maximum amount: The World Health Organization has evaluated the acceptable daily intake of polysorbate 20, 40, 60, 65, and 80. Calculated on the basis of total polysorbate, the daily intake can | |
| Polysorbates | Our wide distribution network, with locations coast-to-coast, helps guarantee fast, reliable service to Univar's customers. |  |
| Polystyrene | Insoluble in water and less dense than water. Contact may cause irritate skin, eyes, and mucous membranes. May be toxic by ingestion.;Styrene monomer, stabilized appears as a clear colorless to dark liquid with an aromatic odor. Vapors heavier than air and irritating to the eyes and mucous membranes. Subject to polymerization. If the polymerization takes place inside a closed container, the container may rupture violently. Less dense than water and insoluble in water. Used to make plastics, paints, and synthetic rubber.;GasVapor; Liquid; PelletsLargeCrystals; PelletsLargeCrystals, Liquid;Liquid;Liquid;COLOURLESS-TO-YELLOW OILY LIQUID.;COLOURLESS SOLID IN VARIOUS FORMS.;Colorless to yellow, oily liquid with a sweet, floral odor.;Colorless to yellow, oily liquid with a sweet, floral odor. Group: Polymersreference-calibration standards. Product ID: styrene. Molecular formula: 104.15g/mol. Mole weight: C8H8;C6H5CHCH2;(C8H8)x;C8H8. C=CC1=CC=CC=C1. InChI=1S / C8H8 / c1-2-8-6-4-3-5-7-8 / h2-7H, 1H2. PPBRXRYQALVLMV-UHFFFAOYSA-N. | |
| Polystyrene | average Mw ~400,000 by GPC. Group: Flexible organic transistors. | |
| Polystyrene | average Mw ~280,000 by GPC. Uses: Polystyrene can be added to nanocatalyst suspension to prepare a polystyrene-photocatalyst thick film. this film can be used as a photoanode in an airlift photocatalytic fuel cell (apfc).polystyrene can be used as a precursor to prepare graphene film and 3d graphene sponges by pyrolysis under argon atmosphere. the filmogenic property of polystyrene can be exploited to prepare 3d graphene sponges with uniform pore sizes.it can also be used to prepare dyed polystyrene (ps) film for routine dosimetry in radiation processing. dyed ps film has high post-irradiation stability. Group: Polystyrene (ps). Alternative Names: PS. CAS No. 9003-53-6. Pack Sizes: 1 g in glass bottle. Product ID: styrene. Molecular formula: average MW ~280,000 by GPC. Mole weight: [CH2CH(C6H5)]n. C=CC1=CC=CC=C1. InChI=1S / C8H8 / c1-2-8-6-4-3-5-7-8 / h2-7H, 1H2. PPBRXRYQALVLMV-UHFFFAOYSA-N. | |
| Polystyrene, | Insoluble in water and less dense than water. Contact may cause irritate skin, eyes, and mucous membranes. May be toxic by ingestion.;Styrene monomer, stabilized appears as a clear colorless to dark liquid with an aromatic odor. Vapors heavier than air and irritating to the eyes and mucous membranes. Subject to polymerization. If the polymerization takes place inside a closed container, the container may rupture violently. Less dense than water and insoluble in water. Used to make plastics, paints, and synthetic rubber.;GasVapor; Liquid; PelletsLargeCrystals; PelletsLargeCrystals, Liquid;Liquid;Liquid;COLOURLESS-TO-YELLOW OILY LIQUID.;COLOURLESS SOLID IN VARIOUS FORMS.;Colorless to yellow, oily liquid with a sweet, floral odor.;Colorless to yellow, oily liquid with a sweet, floral odor. Group: Polymers. CAS No. 9003-53-6. Product ID: styrene. Molecular formula: 104.15g/mol. Mole weight: C8H8;C6H5CHCH2;(C8H8)x;C8H8. C=CC1=CC=CC=C1. InChI=1S / C8H8 / c1-2-8-6-4-3-5-7-8 / h2-7H, 1H2. PPBRXRYQALVLMV-UHFFFAOYSA-N. | |
| POLY(STYRENE) | Insoluble in water and less dense than water. Contact may cause irritate skin, eyes, and mucous membranes. May be toxic by ingestion.;Styrene monomer, stabilized appears as a clear colorless to dark liquid with an aromatic odor. Vapors heavier than air and irritating to the eyes and mucous membranes. Subject to polymerization. If the polymerization takes place inside a closed container, the container may rupture violently. Less dense than water and insoluble in water. Used to make plastics, paints, and synthetic rubber.;GasVapor; Liquid; PelletsLargeCrystals; PelletsLargeCrystals, Liquid;Liquid;Liquid;COLOURLESS-TO-YELLOW OILY LIQUID.;COLOURLESS SOLID IN VARIOUS FORMS.;Colorless to yellow, oily liquid with a sweet, floral odor.;Colorless to yellow, oily liquid with a sweet, floral odor. Group: Polymers. CAS No. 9003-53-6. Pack Sizes: 1 kg. Product ID: styrene. Molecular formula: 104.15g/mol. Mole weight: C8H8. C=CC1=CC=CC=C1. InChI=1S / C8H8 / c1-2-8-6-4-3-5-7-8 / h2-7H, 1H2. PPBRXRYQALVLMV-UHFFFAOYSA-N. | |
| Polystyrene,1000 | Insoluble in water and less dense than water. Contact may cause irritate skin, eyes, and mucous membranes. May be toxic by ingestion.;Styrene monomer, stabilized appears as a clear colorless to dark liquid with an aromatic odor. Vapors heavier than air and irritating to the eyes and mucous membranes. Subject to polymerization. If the polymerization takes place inside a closed container, the container may rupture violently. Less dense than water and insoluble in water. Used to make plastics, paints, and synthetic rubber.;GasVapor; Liquid; PelletsLargeCrystals; PelletsLargeCrystals, Liquid;Liquid;Liquid;COLOURLESS-TO-YELLOW OILY LIQUID.;COLOURLESS SOLID IN VARIOUS FORMS.;Colorless to yellow, oily liquid with a sweet, floral odor.;Colorless to yellow, oily liquid with a sweet, floral odor. Group: Polymers. CAS No. 9003-53-6. Product ID: styrene. Molecular formula: 104.15g/mol. Mole weight: C8H8;C6H5CHCH2;(C8H8)x;C8H8. C=CC1=CC=CC=C1. InChI=1S / C8H8 / c1-2-8-6-4-3-5-7-8 / h2-7H, 1H2. PPBRXRYQALVLMV-UHFFFAOYSA-N. | |
| Polystyrene, 1000, analytical standard | Polystyrene, 1000, analytical standard. Group: Polystyrene (ps). Product ID: styrene. C=CC1=CC=CC=C1. InChI=1S / C8H8 / c1-2-8-6-4-3-5-7-8 / h2-7H, 1H2. PPBRXRYQALVLMV-UHFFFAOYSA-N. | |
| Polystyrene-100-200 mesh | Irregular beads, no additional sieving. Group: Unsubstituted resins. Alternative Names: Benzene, diethenyl-, polymer with ethenylbenzene. CAS No. 9003-70-7. Pack Sizes: 250g. | |
| Polystyrene-200-400 mesh | Irregular beads, no additional sieving. Group: Unsubstituted resins. Alternative Names: Benzene, diethenyl-, polymer with ethenylbenzene. CAS No. 9003-70-7. Pack Sizes: 100g, 250g. | |
| Polystyrene A-100-200 mesh | Highly uniform bead size. Group: Unsubstituted resins. Alternative Names: Benzene, diethenyl-, polymer with ethenylbenzene. CAS No. 9003-70-7. Pack Sizes: 100g, 250g. | |
| Polystyrene A-200-400 mesh | Polystyrene A-200-400 mesh. Group: Unsubstituted resins. Alternative Names: Benzene, diethenyl-, polymer with ethenylbenzene. CAS No. 9003-70-7. Pack Sizes: 100g, 250g. | |
| Polystyrene A Br | These resins are alternatives to the corresponding halomethylated resins; but in comparison to the benzyl support, this resin leads to more acid-stable products due to the resulting phenethyl group. Group: Bromoethyl polystyrene resins. Alternative Names: Bromoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A CHO, Type1 | This aldehyde resin comprises of aminoethyl polystyrene acylated with 6-oxo-caproic acid. Group: Formyl functionalized aminoethyl polystyrene resins. Alternative Names: Formyl Functionalized Aminoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A CHO, Type2 | This aldehyde resin comprises of aminoethyl polystyrene acylated with 6-oxo-caproic acid. Group: Formyl functionalized aminoethyl polystyrene resins. Alternative Names: Formyl Functionalized Aminoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A CHO, Type3 | This aldehyde resin comprises of aminoethyl polystyrene acylated with 6-oxo-caproic acid. Group: Formyl functionalized aminoethyl polystyrene resins. Alternative Names: Formyl Functionalized Aminoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A COOH, Type1 | This carboxy resin is based on aminoethyl polystyrene acylated with succinic acid. Group: Carboxy functionalized aminoethyl polystyrene resins. Alternative Names: Carboxy Functionalized Aminoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A COOH, Type2 | This carboxy resin is based on aminoethyl polystyrene acylated with succinic acid. Group: Carboxy functionalized aminoethyl polystyrene resins. Alternative Names: Carboxy Functionalized Aminoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A FMP, Type1 | The lack of amide bonds and of benzylic linkages makes this resin ideal for solid phase syntheses of secondary sulfonamides and carboxamides as well as of N-alkyl peptide amides. Group: 4-formyl-3-methoxy phenoxyethyl polystyrene resins (fmp-linker). Alternative Names: 4-Formyl-3-Methoxy Phenoxyethyl Polystyrene Resins (FMP-Linker). Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A FMP, Type2 | The lack of amide bonds and of benzylic linkages makes this resin ideal for solid phase syntheses of secondary sulfonamides and carboxamides as well as of N-alkyl peptide amides. Group: 4-formyl-3-methoxy phenoxyethyl polystyrene resins (fmp-linker). Alternative Names: 4-Formyl-3-Methoxy Phenoxyethyl Polystyrene Resins (FMP-Linker). Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A FP, Type1 | For Boc solid phase synthesis of N-alkyl amides by reductive amination as well as for the synthesis of sulfonamides, anilides and amines, respectively. Group: 4-formyl phenoxyethyl polystyrene resins (fp-linker). Alternative Names: 4-Formyl Phenoxyethyl Polystyrene Resins (FP-Linker, 4-Alkoxybenzaldehyd resin). Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A FP, Type2 | For Boc solid phase synthesis of N-alkyl amides by reductive amination as well as for the synthesis of sulfonamides, anilides and amines, respectively. Group: 4-formyl phenoxyethyl polystyrene resins (fp-linker). Alternative Names: 4-Formyl Phenoxyethyl Polystyrene Resins (FP-Linker, 4-Alkoxybenzaldehyd resin). Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A HMBA | This resin is derived from aminoethyl polystyrene and the base labile 4-(hydroxymethyl)benzoic acid linker. Group: 4-(hydroxymethyl)benzoylamidoethyl polystyrene resins. Alternative Names: 4-(Hydroxymethyl) Benzoic Acid (HMBA) on Aminoethyl Polystyrene. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A HMPA, Type1 | This resin is derivatized from aminoethyl polystyrene by coupling with the TFA-labile 4-(hydroxymethyl)-phenoxyacetic acid linker and leading to a more acid stable linker-resin bond than the aminomethyl derivative. Group: 4-(hydroxymethyl) phenoxyacetylamidoethyl polystyrene resins. Alternative Names: 4-(Hydroxymethyl) Phenoxyacetic Acid (HMPA) on Aminoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene A HMPA, Type2 | This resin is derivatized from aminoethyl polystyrene by coupling with the TFA-labile 4-(hydroxymethyl)-phenoxyacetic acid linker and leading to a more acid stable linker-resin bond than the aminomethyl derivative. Group: 4-(hydroxymethyl) phenoxyacetylamidoethyl polystyrene resins. Alternative Names: 4-(Hydroxymethyl) Phenoxyacetic Acid (HMPA) on Aminoethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Poly(styrene-alt-maleic acid)sodium | Poly(styrene-alt-maleic acid)sodium. Uses: Designed for use in research and industrial production. Additional or Alternative Names: POLY(STYRENE-ALT-MALEIC ACID)SODIUM;2,5-Furandione,polymerwithethenylbenzene,sodiumsalt;POLY(STYRENE-ALT-MALEIC ACID), SODIUM S&;poly(styrene-alt-maleic acid) sodium salt solution;MALEICANHYDRIDE-STYRENE,COPOLYMER,SODIUMSALT;Poly(styrene-alt-maleicacid)so. Product Category: Biomaterials. CAS No. 25736-61-2. Molecular formula: (C16H14Na2O8)n. Product ID: ACM25736612. Alfa Chemistry ISO 9001:2015 Certified. |  |
| Polystyrene AM CHO, Type1 | This aldehyde resin comprises of aminomethyl polystyrene acylated with 6-oxo-caproic acid. Group: Formyl functionalized aminomethyl polystyrene resins. Alternative Names: Formyl Functionalized Aminomethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene AM CHO, Type2 | This aldehyde resin comprises of aminomethyl polystyrene acylated with 6-oxo-caproic acid. Group: Formyl functionalized aminomethyl polystyrene resins. Alternative Names: Formyl Functionalized Aminomethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene AM CHO, Type3 | This aldehyde resin comprises of aminomethyl polystyrene acylated with 6-oxo-caproic acid. Group: Formyl functionalized aminomethyl polystyrene resins. Alternative Names: Formyl Functionalized Aminomethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene AM COOH, Type1 | This carboxy resin is based on aminomethyl polystyrene acylated with succinic acid. Group: Carboxy functionalized aminomethyl polystyrene resins. Alternative Names: Carboxy Functionalized Aminomethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene AM COOH, Type2 | This carboxy resin is based on aminomethyl polystyrene acylated with succinic acid. Group: Carboxy functionalized aminomethyl polystyrene resins. Alternative Names: Carboxy Functionalized Aminomethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene AM HMBA | This resin is derived from aminomethyl polystyrene and the base labile 4-(hydroxymethyl)benzoic acid linker. Group: 4-(hydroxymethyl)benzoylamidomethyl polystyrene resins. Alternative Names: 4-(Hydroxymethyl) Benzoic Acid (HMBA) on Aminomethyl Polystyrene. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene AM HMPA, Type1 | This resin is derivatized from aminomethyl polystyrene by coupling with the TFA-labile 4-(hydroxymethyl)-phenoxyacetic acid linker and is an alternative to the PHB resins. Group: 4-(hydroxymethyl) phenoxyacetylamidomethyl polystyrene resins. Alternative Names: 4-(Hydroxymethyl) Phenoxyacetic Acid (HMPA) on Aminomethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene AM HMPA, Type2 | This resin is derivatized from aminomethyl polystyrene by coupling with the TFA-labile 4-(hydroxymethyl)-phenoxyacetic acid linker and is an alternative to the PHB resins. Group: 4-(hydroxymethyl) phenoxyacetylamidomethyl polystyrene resins. Alternative Names: 4-(Hydroxymethyl) Phenoxyacetic Acid (HMPA) on Aminomethyl Polystyrene Resin. Pack Sizes: 5g, 25g, 100g. | |
| Polystyrene, amine terminated | Polystyrene is a colorless and transparent thermoplastic, among which expanded polystyrene is commonly known as Styrofoam. Uses: Functional polystyrene with amine termination has been used as a macromolecular surfactant; capable of conjugation with enzymes; proteins and lipases. they are also known to form well-defined assemblies in aqueous solution. Group: Polystyrene (ps). Alternative Names: amino PS, PS NH2, aminopolystyrene. Pack Sizes: 1 g in glass bottle. Molecular formula: average Mn 5,000. Mole weight: (C8H8)nCH5N. | |
Our database is helping our users find suppliers everyday.
