Water Treatment Chemicals Suppliers USA
Find where to buy products from suppliers in the USA, including: distributors, industrial manufacturers in America, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the American suppliers website for prices, SDS or more information. You can also view suppliers in Australia, NZ or the UK.
Product | Description | |
---|---|---|
Acidic silica sol, diameter : 10-15 nm, solid content : 24-26 % Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.15-1.16 g/cm³. | |
Acidic silica sol, diameter : 10-15 nm, solid content : 29-31 % Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 110-130 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.29-1.31 g/cm³. | |
Acidic silica sol, diameter : 14-16 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 19-21 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 20-40 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 40-60 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 45-55 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 70-90 nm, Na : ≤0.05 % Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 70-90 nm, Na : ≤0.08 % Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.29-1.31 g/cm³. | |
Acidic silica sol, diameter : 75-85 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Acidic silica sol, diameter : 9-11 nm Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Alginic acid sodium salt, Chemical pure,Viscosity : 200±20mpa.s Quick inquiry Where to buy Suppliers range | Sodium alginate is a linear polymer extracted from brown algae or Sargasso organic solvents such as ether. Sodium alginate dissolves in water to form a viscous colloid. After absorbing water, its volume can increase by 10 times its original volume. The viscosity of its aqueous solution varies mainly with the degree of polymerization and concentration. Sodium alginate is more stable in dry powder state than in solution state. As a natural polymer hydrosol, sodium alginate has many characteristics such as good water solubility, non-toxicity, easy degradation and good biocompatibility, and has a good synergistic effect with other colloids. Therefore, it has huge application value in various industries such as medicine, food, packaging, textile industry, and biological materials. Uses: ·Treatment of methanol wastewater in a fluidized bed reactor ·As a surface stabilizer, it effectively removes heavy metal ions ·Suitable for gel-based separation techniques ·Drug Delivery and Cell Preservation ·Preparation of colloidal biodegradable structures. Group: Plant Hydrocolloids. CAS No. 9005-38-3. Density: Slowly soluble in water forming a viscous, colloidal solution, practically insoluble in ethanol (96 per cent). | |
Aluminum Silicate Dispersion (Al2SiO5, Purity: 99.9%, Diameter: <100nm) Quick inquiry Where to buy Suppliers range | Due to its small particle size, narrow particle size distribution, and no precipitation and stratification, nano-aluminosilicate has good suspension stability, and can improve the dispersion and fineness of the coating, so that the appearance, gloss, hardness and dispersibility of the coating are improved. There are good results. The use of nano aluminum silicate in the coating can make the coating produce nano-effects such as "zero convection", which greatly reduces the heat transfer ability of the material. It can be used as a good thermal insulation material to make up for the existence of traditional wall thermal insulation coatings. High water absorption, easy aging, large volume shrinkage, easy to cause low strength in the later stage of the product and hollow cracking to reduce the performance of thermal insulation coatings. Uses: ·Efficient catalyst ·Activated sintering additive ·Surface conductive coating treatment of metal and scrap metal ·Conductive film layer, polishing paste ·High-grade metallic pigments, composite materials, aerospace, chemical materials, etc. Group: Metal Oxide Colloids. CAS No. 12141-46-7. Molecular Weight: 282.21 g/mol. Flash Point: 99.9 %. | |
Aluminum Sulfate Quick inquiry Where to buy Suppliers range | Aluminum Sulfate, often referred to as "alum," finds application in various domains. It serves as a flocculant, coagulant, and emulsion breaker in water treatment, aiding in the elimination of turbidity, suspended solids, and the reduction of biochemical oxygen demand. Furthermore, it contributes to the clarification of potable, process, and wastewater within water treatment procedures. Uses: Water Treatment, Concrete, Gardening, Petroleum. Alternative Names: Alum, Aluminum Sulphate, Sulphuric Acid Aluminum Salt. Grades: Technical. CAS No. 10043-01-3. Pack Sizes: 50lb. | USA |
Anionic Surfactant Quick inquiry Where to buy Suppliers range | Anionic surfactant is an incredibly versatile biosurfactant utilizing the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is TSCA-pending and REACH-registered, making it prime for industrial applications as a dispersant, emulsifier, and wetting agent. Amphi® CH's exceptional attributes include low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. Additionally, it is USDA-certified, readily biodegradable, and free from prop 65 issues and 1,4-dioxane. Furthermore, it is non-GMO, palm oil-free, and has a low carbon footprint. Uses: Coalescing agent, degreaser, dispersant, dispersant, emulsifier, scouring agent, solubilizer, solvent, surfactant, surfactant (anionic), surfactant (nonionic), wetting agent. Group: Case ingredients - additives (dispersing & wetting additives, functional additives). fluids & lubricants - additives (other additives, performance additives, surface protective additives). agrochemicals - adjuvants & formulation ingredients (dispersants & emulsifiers, stickers, surfactants & wetting agents). cleaning ingredients - cleaning aids (detergents & degreasers, emulsifiers & demulsifiers). cosmetic ingredients - functionals (emulsifiers, solubilizers & dispersants). industrial additives & materials - paper & pulp chemicals (finishing additives & treatments). industrial additives & materials - processing aids (polymerization additives). cleaning ingredients - soaps & surfactants (blends & other surfactants). cosmetic ingredients - surfactants & cleansers (blends & other cleansers). industrial additives & materials - textile & leather chemicals (finishing additives & treatments). industrial additives & materials - water treatment chemicals (water treatment additives). Approvals: REACH-registered, USDA-certified 100% BioBased content, Readily Biodegradable. CAS No. Product ID: Amphi® CH. Molecular formula: 1,4-Dioxane-free, 100% Carbon Renewable (RCI), Bio-based, Biodegradable | |
Bentonite Clay Quick inquiry Where to buy Suppliers range | Bentonite Clay finds frequent use in various applications, including water treatment processes, as well as in the manufacturing of items like animal feed binders, foundry casting materials, iron ore pellets, and even cat litter. In its fine powder form, this Bentonite Clay serves as a valuable soil amendment for constructing landfills, lagoons, and water ponds, effectively reducing permeability rates and delivering exceptional sealing outcomes. Uses: Water Treatment, Cat Litter, Ceramics, Soil Amendments, Paper. Alternative Names: Montmorillonite, Silicate of Alumina, Smectite Clay, Sodium Activated Bentonite, Sodium Montmorillonite, and Wikinite. CAS No. 1302-78-9. Pack Sizes: 50 lb. | USA |
Bronopol Quick inquiry Where to buy Suppliers range | Antimicrobial Chemical. Uses: Biocide, germicide, fungicides, preservatives, waste water treatment, paint, ink and adhesive etc. Group: Antimicrobial agent. Alternative Names: Bronopol BP. Approvals: BP, Technical garde(ISH). CAS No. 52-51-7. Pack Sizes: 25kgs net paper or plastic drums. Categories: bronopol; 2-Bromo-2-nitro-1,3-propanediol; 2-Bromo-2-nitropropane-1,3-diol; Bronosol. | International |
Calcium Chloride Quick inquiry Where to buy Suppliers range | Calcium Chloride. Uses: Oil drilling, road de-icing, water treatment, food additive, chemical industry, dust control. Purity: Food, Pharmaceutical, Cosmetic, Paper, Textile. CAS No. 7440-70-2. Pack Sizes: Bags. Molecular formula: NSF. | |
Calcium Hydroxide Quick inquiry Where to buy Suppliers range | Calcium Hydroxide, also known as Hydrated Lime or Slaked Lime, finds utility across diverse industrial sectors, serving purposes including water treatment, anti-stripping agent, acid neutralization, buffering, and soil stabilization. Uses: Acid Neutralizer, Buffer, pH Control, Water Treatment. Alternative Names: Hydrated Lime, Lime, Lime Slaked, Slaked Lime, Rotary Calcium Hydroxide. CAS No. 1305-62-0. Pack Sizes: 50lb. | USA |
Chitin, BioReagent Quick inquiry Where to buy Suppliers range | Chitin is a polysaccharide that exists in a variety of organisms, especially crustacean shells, and is widely distributed. There are hydroxyl groups, amino groups and strong intermolecular and intramolecular hydrogen bonds in the molecule of chitin, and the molecular weight ranges from hundreds of thousands to several million. Chitin has many unique properties such as biodegradability, cell affinity and biological effects. Therefore, they have been applied in wastewater treatment, food industry, textile, chemical industry, household chemicals, agriculture, bioengineering and medicine. Uses: ·For identification and characterization of chitinases and chitin deacetylases ·For the manufacture of glucosamine and chitosan ·Drug sustained release, medical dressings, ophthalmic materials and pharmaceutical preparations. Group: Animal Hydrocolloids. CAS No. 1398-61-4. Molecular Weight: 203.19. InChIKey: 737.18 °C (rough estimate). Boiling Point: >300 °C (dec.). Melting Point: 269.8 °C. Purity: 1.37 g/cm3. Density: It is soluble in concentrated formic acid and methane sulfonic acid, insoluble in water, organic solvents, weak acids and lyes. | |
Chitin, Highly Purified Quick inquiry Where to buy Suppliers range | Chitin is a polysaccharide that exists in a variety of organisms, especially crustacean shells, and is widely distributed. There are hydroxyl groups, amino groups and strong intermolecular and intramolecular hydrogen bonds in the molecule of chitin, and the molecular weight ranges from hundreds of thousands to several million. Chitin has many unique properties such as biodegradability, cell affinity and biological effects. Therefore, they have been applied in wastewater treatment, food industry, textile, chemical industry, household chemicals, agriculture, bioengineering and medicine. Uses: ·For identification and characterization of chitinases and chitin deacetylases ·For the manufacture of glucosamine and chitosan ·Drug sustained release, medical dressings, ophthalmic materials and pharmaceutical preparations. Group: Animal Hydrocolloids. CAS No. 1398-61-4. Molecular Weight: 203.19. InChIKey: 737.18 °C (rough estimate). Boiling Point: >300 °C (lit). Melting Point: 269.8 °C. Purity: 1.37 g/cm3. Density: It is soluble in concentrated formic acid and methane sulfonic acid, insoluble in water, organic solvents, weak acids and lyes. | |
Chitin, Practical Grade Quick inquiry Where to buy Suppliers range | Chitin is a polysaccharide that exists in a variety of organisms, especially crustacean shells, and is widely distributed. There are hydroxyl groups, amino groups and strong intermolecular and intramolecular hydrogen bonds in the molecule of chitin, and the molecular weight ranges from hundreds of thousands to several million. Chitin has many unique properties such as biodegradability, cell affinity and biological effects. Therefore, they have been applied in wastewater treatment, food industry, textile, chemical industry, household chemicals, agriculture, bioengineering and medicine. Uses: ·For identification and characterization of chitinases and chitin deacetylases ·For the manufacture of glucosamine and chitosan ·Drug sustained release, medical dressings, ophthalmic materials and pharmaceutical preparations. Group: Animal Hydrocolloids. CAS No. 1398-61-4. Molecular Weight: 203.19. InChIKey: 737.18 °C (rough estimate). Boiling Point: >300 °C (lit). Melting Point: 269.8 °C. Purity: 1.37 g/cm3. Density: It is soluble in concentrated formic acid and methane sulfonic acid, insoluble in water, organic solvents, weak acids and lyes. | |
Chitin, Reagent Grade Quick inquiry Where to buy Suppliers range | Chitin is a polysaccharide that exists in a variety of organisms, especially crustacean shells, and is widely distributed. There are hydroxyl groups, amino groups and strong intermolecular and intramolecular hydrogen bonds in the molecule of chitin, and the molecular weight ranges from hundreds of thousands to several million. Chitin has many unique properties such as biodegradability, cell affinity and biological effects. Therefore, they have been applied in wastewater treatment, food industry, textile, chemical industry, household chemicals, agriculture, bioengineering and medicine. Uses: ·For identification and characterization of chitinases and chitin deacetylases ·For the manufacture of glucosamine and chitosan ·Drug sustained release, medical dressings, ophthalmic materials and pharmaceutical preparations. Group: Animal Hydrocolloids. CAS No. 1398-61-4. Molecular Weight: 203.19. InChIKey: 737.18 °C (rough estimate). Boiling Point: >300 °C (lit). Melting Point: 269.8 °C. Purity: 1.37 g/cm3. Density: It is soluble in concentrated formic acid and methane sulfonic acid, insoluble in water, organic solvents, weak acids and lyes. | |
Chlorine Quick inquiry Where to buy Suppliers range | Chlorine. Uses: Chlorine appears as a greenish yellow gas with a pungent suffocating odor. Toxic by inhalation. Slightly soluble in water. Liquefies at -35? and room pressure. Readily liquefied by pressure applied at room temperature. Density (as a liquid) 13.0 lb / gal. Contact with unconfined liquid can cause frostbite by evaporative cooling. Does not burn but, like oxygen, supports combustion. Long-term inhalation of low concentrations or short-term inhalation of high concentrations has ill effects. Vapors are much heavier than air and tend to settle in low areas. Contact CHEMTREC to activate chlorine response team 800-424-9300. Used to purify water, bleach wood pulp, and to make other chemicals. Rate of onset: Immediate to hours Persistence: Minutes to hours Odor threshold: 3.5 ppm Source/use/other hazard: Cleaner/disinfectant in many industries; water treatment; WWI war gas; irritating corr fumes heavier than air.;GasVapor; GasVapor, Liquid; Liquid;GREENISH-YELLOW COMPRESSED LIQUEFIED GAS WITH PUNGENT ODOUR.;Greenish-yellow gas with a pungent, irritating odor.;Greenish-yellow gas with a pungent, irritating odor. [Note: Shipped as a liquefied compressed gas.];Greenish-yellow gas at room temperature; clear, amber-colored liquid under increased pressure or at temperatures below -30°F (-34?). Group: Polymers. IUPAC Name: molecular chlorine. Molecular Weight: 70.9g/mol. Molecular Formula: Cl2;Cl2. SMILES: ClCl. InChI: InChI=1S/Cl2/c1-2. InChIKey: KZBUYRJDOAKODT-UHFFFAOYSA-N. Boiling Point: -30.3 °F at 760 mm Hg (EPA, 1998);-34.04 ?;-34 ?;-29°F;-29°F. Melting Point: -150 °F (EPA, 1998);-101.5 ?;-101 ?;-150°F;-150°F. Density: 1.424 at 59 °F (USCG, 1999);2.898 g/L;1.424 at 59°F;2.47(relative gas density). Solubility: 0.7 % (NIOSH, 2016);1.46 g/100 cc water at 0 ?; 310 cc/100 cc water at 10 ?; 177 cc/100 cc water at 30 ?; 0.57 g/100 cc water at 30 ?;Solubility in water at 25 ? with formation of aqueous Cl2 (0.062 M), HOCl (0.030 M), chloride ion (0.030 M); total solubility: 0.092 M; more soluble in alkalies;In water, 6,300 mg/L at 25 ?;Solubility in water, g/100ml at 20 ?: 0.7;0.7%. Viscosity: 0.134 mPa.sec at 20 ? (gas); 0.346 mPa.sec at 20 ? (liquid). | |
Citric Acid Quick inquiry Where to buy Suppliers range | Citric Acid granular, fine granular Citric Acid is a naturally made acid and is the most widely used organic acid. It is used in many processes as well as in foods, beverages, water treatment, pH control as well as pharmaceuticals and technical applications. It is typically a colorless crystal or white, crystalline powder with a strongly acidic taste. It is sometimes called sour salt, and used to make foods and candies/confectionaries with a sour taste. Citric acid granular is soluble in water, freely soluble in ethanol (96%). It is non toxic and has a low reactivity. It is fully biodegradable and can be disposed of with regular waste or sewage. Uses: Food ingredient, pH, water treatment, chemical processes. Alternative Names: Citric, Citric Acid, Sour salt. Grades: Food, NSF. Approvals: NSF, Food. CAS No. CAS: 77-92-9. Pack Sizes: 50 Lb, 25 Kg, 55 Lb. | USA |
creosote Quick inquiry Where to buy Suppliers range | Creosote is the name used for a variety of products: wood creosote, coal tar creosote, coal tar, coal tar pitch, and coal tar pitch volatiles. These products are mixtures of many chemicals created by burning of beech and other woods, coal, or from the resin of the creosote bush. Uses: Creosote is used in construction (roofing), railroad and utilities industries, and for wood treatment and waterproofing. Synonyms: BEECHWOOD CREOSOTE;CREOSOTE;CREOSOTE COAL TAR;COAL TAR CREOSOTE;CREOSOTE FROM BEECHWOOD; Creosote(woodtarfraction); Creosote, woodtarfraction; CREOSOTE-IMPREGNATEDWASTEMATERIALS. CAS No. 8021-39-4. Molecular formula: C7H8O2. Mole weight: 124.13722. | |
Culinox Salt Quick inquiry Where to buy Suppliers range | Culinox Salt is a granulated salt that has a cubic structure. It is a food grade, high-purity salt that contains no additives. The high-purity of this salt helps insure a consistent saltiness intensity. Culinox Salt goes through a few processes that reduces the amount of carbonate and sulfate impurities, magnesium, copper, calcium, iron, and other heavy metals. Uses: Food, Water Purification, Water Treatment. Alternative Names: NaCl, Sodium Chloride. Grades: FCC, GMP, Kosher. CAS No. 7647-14-5. Pack Sizes: 50 Lb. | USA |
DEHA-Diethylhydroxylamine Quick inquiry Where to buy Suppliers range | Synonym DEHA 98%, N,N-Diethylohydroxyloamine. Other names N-Ethyl-N-hydroxyethanamine. CAS # 3710-84-7. N,N-Diethylhydroxylamine is used as a water treatment chemical to avoid corrosion in water boilers by binding oxygen (Oxygen scavenger). Short stopper of polymerization in production of SBR/NBR and poly butadiene polymer. Polymerization inhibitor used as anti-popcorn agent in styrene/butadiene monomer production. Categories: Polymerisation inhibitor, Corrosion inhibitor, Color stabilizer, Oxygen scavenger. | California |
dexbrompheniramine Quick inquiry Where to buy Suppliers range | Dexbrompheniramine is an histamine H1-receptor antagonist used for the treatment of allergic conditions including hay fever or urticaria. It is the pharmacologically active dextrorotatory isomer of brompheniramine. Dexbrompheniramine is a first generation antihistamine that reduces the effects of natural chemical histamine in the body including the symptoms like sneezing, itching, watery eyes, and runny nose. Uses: Allergic conditions. Synonyms: DEXBROMPHENIRAMINE; DEXBROMPHENIRAMINE BASE;D-Brompheniramine;(S)-Brompheniramine;(S)-γ-(4-Bromophenyl)-N,N-dimethyl-2-pyridinepropan-1-amine;Disomer. Grades: 95%. CAS No. 132-21-8. Molecular formula: C16H19BrN2. Mole weight: 319.24. | |
Graphene Oxide Solution Quick inquiry Where to buy Suppliers range | Graphene Oxide Solution. Uses: ?Functional composite materials (fabric reinforcement, hybrid scaffold for tissue engineering, barrier for electromagnetic waves); ?Biomedical & bio-imaging applications (drug delivery carrier, imaging probe, biosensor, photo-thermal therapy, enzyme activation catalyst); ?Energy conversion & storage system (battery & supercapacitor); ?Catalyst for chemical reactions; ?Filter membrane for waste water treatment. Product ID: ACMA00020896. Appearance: Dried powder. | |
Hydroxy Ethylidene Diphosphonic Acid 60% Quick inquiry Where to buy Suppliers range | Hydroxy Ethylidene Diphosphonic Acid 60%. Uses: Water treatment: chelating agent in water treatment systems, especially in cooling systems and boilers. -detergent and cleaning products industry: chelating agent in detergents and cleaning products to eliminate water hardness and prevent scale formation on surfaces and equipment. -oil and gas industry: scale and corrosion inhibitor agent in wells and pipes. helps prevent scaling and corrosion caused by the presence of minerals and metal ions in production fluids. -textile industry: used in the textile dyeing and finishing process as a stabilizing and dispersing agent for metal ions. it helps to improve the fixation of dyes and prevent the formation of stains and discoloration on fabrics. - chemical industry: hedp is used in chemical manufacturing as a hydrogen peroxide stabilizer, a chelator in personal care product formulations, and as an additive in paper and pulp products. Group: HEDP. CAS No. 2809-21-4. Pack Sizes: IBC'S. Product ID: UN3265. | |
Iron(II) sulfate heptahydrate Quick inquiry Where to buy Suppliers range | Iron(II) sulfate heptahydrate. Uses: In manufacture of Fe, Fe Compounds, other sulfates; in Fe electroplating baths; in fertilizer; as food and feed supplement; in radiation dosimeters; as reducing agent in chemical processes; as wood preservative; as weed-killer; in prevention of chlorosis in plants; in other pesticides; in writing ink; in process engraving and lithography; as dye for leather; in etching aluminum; in water treatment; in qualitative analysis ("brown ring" test for nitrates); as polymerization catalyst. As analytical reagent; as raw material for ferrite; raw material to produce magnetic iron oxide, iron(III) oxide and iron blue inorganic pigment, iron catalyst and poly iron sulfate; as chromatographic reagent. In agriculture, it is used as pesticide in agriculture to control wheat smut, scab of apple and bear, fruit tree decay; as fertilizer to remove moss and lichen of food trunk. Medically it is used as local astringent, blood tonic and anti-anemia. Ferrous sulfate heptahydrate (feed grade) can be used as the iron fortifier for feed additive. Ferrous sulfate heptahydrate (food grade) is used as nutrition supplements, such as iron fortifier, coloring agent for fruit and vegetable. According to Chinese regulation, it can be used in following foods and with allowed amounts: Sweets with filling and salt: 3000~6000 mg/kg; Cereals with high iron content and corresponding products (maximum daily consumption 50g): 860~960 mg/kg; Dairy and infant foods: 300-500 mg/kg; Cereals and corresponding products: 120~140 mg/kg; Beverages: 50~100 mg/kg. It is used to produce iron salt, iron oxide pigment, mordant, water purifier, preservatives, disinfectant, etc. Group: Heterocyclic Organic Compound. Alternative Names: iron (II) sulfate heptahydrate; Iron( cento) sulfate heptahydrate; MFCD00149719; Iron(II) sulfate heptahydrate, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, 99.5-104.5% (manganometric); Iron(II) sulfate heptahydrate, plant cell culture tested, >=99%; Iron protosulfate; Iron sulfate heptahydrate; D01725; iron sulphate heptahydrate; J-521365. CAS No. 7782-63-0. Molecular formula: FeH14O11S. Mole weight: 278.006g/mol. IUPAC Name: iron(2+);sulfate;heptahydrate. Exact Mass: 277.961g/mol. EC Number: 616-510-7. SMILES: O.O.O.O.O.O.O | |
Lanolin Alcohol (CAS 8027-33-6) Quick inquiry Where to buy Suppliers range | Lanolin Alcohol is a waxy substance that is extracted from the wool of sheep. It is chemically classified as a alcohol and is primarily composed of long-chain fatty alcohols, which have moisturizing and emollient properties. Lanolin Alcohol is commonly used in cosmetic, personal care, and pharmaceutical products due to its ability to hydrate and restore the skin's natural moisture balance. It is often used as a primary ingredient in skin creams, lotions, and balms. Additionally, Lanolin Alcohol has a range of industrial applications, including as a lubricant for machinery and a component in paints and varnishes. Uses: 1. Lanolin alcohol is used as a surface-active agent in various cosmetic formulations. 2. It is used as an emulsifier and co-emulsifier to stabilize oil-in-water and water-in-oil emulsions in skin care formulations. 3. It is used as a thickener agent in personal care products such as lotions, creams, and ointments. 4. Lanolin alcohol is widely utilized in the pharmaceutical industry as a binder and coating agent for tablets and capsules. 5. It is also used in veterinary medicine for the topical treatment of various skin conditions in animals. 6. Lanolin alcohol can be used as a lubricant in the manufacturing of plastic products. 7. It is used as a conditioning agent in hair care products to improve the texture and appearance of hair. Group: Conditioning Oils. CAS No. 8027-33-6. Product ID: ACM8027336-1. Appearance: waxy yellow to white solid that has a greasy texture. | |
Large particle size silica sol, diameter : 80 nm, acidic Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Liquid Chlorine Quick inquiry Where to buy Suppliers range | Liquid Chlorine. Uses: Chlorine appears as a greenish yellow gas with a pungent suffocating odor. Toxic by inhalation. Slightly soluble in water. Liquefies at -35? and room pressure. Readily liquefied by pressure applied at room temperature. Density (as a liquid) 13.0 lb / gal. Contact with unconfined liquid can cause frostbite by evaporative cooling. Does not burn but, like oxygen, supports combustion. Long-term inhalation of low concentrations or short-term inhalation of high concentrations has ill effects. Vapors are much heavier than air and tend to settle in low areas. Contact CHEMTREC to activate chlorine response team 800-424-9300. Used to purify water, bleach wood pulp, and to make other chemicals. Rate of onset: Immediate to hours Persistence: Minutes to hours Odor threshold: 3.5 ppm Source/use/other hazard: Cleaner/disinfectant in many industries; water treatment; WWI war gas; irritating corr fumes heavier than air.;GasVapor; GasVapor, Liquid; Liquid;GREENISH-YELLOW COMPRESSED LIQUEFIED GAS WITH PUNGENT ODOUR.;Greenish-yellow gas with a pungent, irritating odor.;Greenish-yellow gas with a pungent, irritating odor. [Note: Shipped as a liquefied compressed gas.];Greenish-yellow gas at room temperature; clear, amber-colored liquid under increased pressure or at temperatures below -30°F (-34?). Group: Polymers. CAS No. 7782-50-5. IUPAC Name: molecular chlorine. Molecular Weight: 70.9g/mol. Molecular Formula: Cl2;Cl2. SMILES: ClCl. InChI: InChI=1S/Cl2/c1-2. InChIKey: KZBUYRJDOAKODT-UHFFFAOYSA-N. Boiling Point: -30.3 °F at 760 mm Hg (EPA, 1998);-34.04 ?;-34 ?;-29°F;-29°F. Melting Point: -150 °F (EPA, 1998);-101.5 ?;-101 ?;-150°F;-150°F. Density: 1.424 at 59 °F (USCG, 1999);2.898 g/L;1.424 at 59°F;2.47(relative gas density). Solubility: 0.7 % (NIOSH, 2016);1.46 g/100 cc water at 0 ?; 310 cc/100 cc water at 10 ?; 177 cc/100 cc water at 30 ?; 0.57 g/100 cc water at 30 ?;Solubility in water at 25 ? with formation of aqueous Cl2 (0.062 M), HOCl (0.030 M), chloride ion (0.030 M); total solubility: 0.092 M; more soluble in alkalies;In water, 6,300 mg/L at 25 ?;Solubility in water, g/100ml at 20 ?: 0.7;0.7%. Viscosity: 0.134 mPa.sec at 20 ? (gas); 0.346 mPa.sec at 20 ? (liquid). | |
Low sodium silica sol, diameter : 75-85 nm, acidic Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Methyl Alcohol, 99+% Quick inquiry Where to buy Suppliers range | Methyl Alcohol is a common chemical reagent in organic synthesis participating in a variety of reactions. Used to prepare novel triazole-polyphenol hybrid compounds as FabG4 (Rv0242c) enzyme inhibitors for the treatment of Mycobacterium Tuberculosis (1). Also used in the synthesis of prodelphinidin B1/B2/B4 which display antitumor activities against prostate cancer cells.Drinking water contaminant candidate list 3 (CCL 3) compound as per United States Environmental Protection Agency (EPA), environmental, and food contaminants. Group: Biochemicals. Alternative Names: Methanol; Bieleski's Solution; Carbinol; Methanol Cluster; Methyl Hydroxide; Methylol; Monohydroxymethane; NSC 85232; Wood Alcohol; MeOH, Hydroxymethane. Grades: Reagent Grade. CAS No. 67-56-1. Pack Sizes: 1L, 4L, 16L, 64L, 180L. Molecular Formula: CH3OH, Molecular Weight: 32.04. US Biological Life Sciences. | Worldwide |
Methyl cellulose Quick inquiry Where to buy Suppliers range | Methyl cellulose (or methylcellulose) is a chemical compound derived from cellulose. It is a hydrophilic White powder in pure form and dissolves in cold (but not in hot) water, forming a clear viscous solution or gel. It is sold under a variety of trade names and is used as a thickener and emulsifier in various food and cosmetic products, and also as a treatment of constipation. Like cellulose, it is not digestible, not toxic, and not an allergen. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. CAS No. 9004-67-5. Product ID: PE-0144. | |
Methyl cellulose Quick inquiry Where to buy Suppliers range | Methyl cellulose (or methylcellulose) is a chemical compound derived from cellulose. It is a hydrophilic White powder in pure form and dissolves in cold (but not in hot) water, forming a clear viscous solution or gel. It is sold under a variety of trade names and is used as a thickener and emulsifier in various food and cosmetic products, and also as a treatment of constipation. Like cellulose, it is not digestible, not toxic, and not an allergen. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. CAS No. 9004-67-5. Product ID: PE-0071. | |
Methyl cellulose Quick inquiry Where to buy Suppliers range | Methyl cellulose (or methylcellulose) is a chemical compound derived from cellulose. It is a hydrophilic White powder in pure form and dissolves in cold (but not in hot) water, forming a clear viscous solution or gel. It is sold under a variety of trade names and is used as a thickener and emulsifier in various food and cosmetic products, and also as a treatment of constipation. Like cellulose, it is not digestible, not toxic, and not an allergen. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. CAS No. 9004-67-5. Product ID: PE-0222. | |
Methylcellulose, 27.5-31.5% methoxyl basis Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, medium viscosity, Methoxyl content : 27.5-31.5 % Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, Reagent grade Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, viscosit : 1500 mPa.s Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, viscosity : 100000 mPa.s Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, viscosity : 15 mPa.s Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, viscosity : 15 mPa.s, BioReagent, suitable for cell culture Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Density: Water: 50 mg/mL, clear to hazy. | |
Methylcellulose, viscosity : 25 cP Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, viscosity : 3000-5500 mPa.s, 2 % in H2O(20 °C) Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, viscosity : 400 mPa.s Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Methylcellulose, viscosity : 50000 mPa.s Quick inquiry Where to buy Suppliers range | Methylcellulose is a nonionic cellulose ether made by introducing methyl groups into cellulose by etherification. Methylcellulose has 4 important functions: thickening, surface activity, film-forming, and thermogel formation (melting when cooled). Methylcellulose has a unique thermal gelation property, that is, it forms a gel when heated and melts when cooled, and the gelling temperature ranges from 50 to 70 °C. Methylcellulose is widely used in the construction industry, such as as a binder for cement, mortar, joint desliming, etc. It is used as a film former and adhesive in the cosmetic, pharmaceutical and food industries. Also used as textile printing and dyeing sizing agent, synthetic resin dispersant, coating film former and thickener. Uses: ·Functions in oil, natural gas drilling, well digging and other projects: as a drilling mud washing fluid treatment agent, it can resist the pollution of various soluble salts. ·In the textile, printing and dyeing industry, methylcellulose is used as a sizing agent for light yarn sizing of cotton, silk wool, chemical fibers, blended and other strong materials. ·In the paper industry, methyl cellulose is used as a paper surface smoothing agent and sizing agent. ·Used in the ceramic industry, it can be used as an adhesive for blanks, plasticizers, suspending agents for glazes, and color-fixing agents. ·Used in construction, the function is to improve water retention and strength. ·In the food industry, thickeners, stabilizers, binders or excipients can be used. Group: Chemically Modified Hydrocolloids. CAS No. 9004-67-5. Molecular Weight: 454.51 g/mol. Boiling Point: 290-305 °C. Purity: 1.01 g/cm3(Temp: 70 °C). | |
Monosodium Phosphate Quick inquiry Where to buy Suppliers range | Monosodium Phosphate. Uses: Food industry: it is used as a food additive. chemical industry: it is used in the synthesis and manufacturing of other chemical products, such as detergents, cleaning products, fertilizers and personal care products. laboratory and analytical chemistry: it is used as a reagent and as a buffer in various chemical experiments and analyses. water treatment: to adjust ph and as a water conditioning agent. helps prevent corrosion of pipes and equipment and maintain chemical balance in water. cleaning products industry: it is used in the manufacture of cleaning products such as detergents, disinfectants and surface cleaners. ?pharmaceutical industry: it is used in the manufacture of medications and supplements as a buffering agent and ph stabilizer. it is also used in intravenous formulations and oral care products. Food grade. Group: Industrial Chemicals. CAS No. 7558-80-7. Pack Sizes: Bags, Super sacks. Molecular formula: Molecular formula: NaH2PO4. Categories: triglyceride. | |
Non ionic Surfactant Quick inquiry Where to buy Suppliers range | Nonionic surfactants are highly versatile biosurfactant that utilizes the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is both TSCA-pending and REACH-registered, making it ideal for industrial use as a dispersant, emulsifier, and wetting agent. Among its exceptional attributes are its low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. Moreover, it is USDA-certified, readily biodegradable, and free from both prop 65 issues and 1,4-dioxane. Lastly, it is non-GMO, palm oil-free, and boasts a low carbon footprint. Uses: Coalescing agent, degreaser, dispersant, dispersant, emulsifier, scouring agent, solubilizer, solvent, surfactant, surfactant (anionic), surfactant (nonionic), wetting agent. Group: Case ingredients - additives (dispersing & wetting additives, functional additives). fluids & lubricants - additives (other additives, performance additives, surface protective additives). agrochemicals - adjuvants & formulation ingredients (dispersants & emulsifiers, stickers, surfactants & wetting agents). cleaning ingredients - cleaning aids (detergents & degreasers, emulsifiers & demulsifiers). cosmetic ingredients - functionals (emulsifiers, solubilizers & dispersants). industrial additives & materials - paper & pulp chemicals (finishing additives & treatments). industrial additives & materials - processing aids (polymerization additives). cleaning ingredients - soaps & surfactants (blends & other surfactants). cosmetic ingredients - surfactants & cleansers (blends & other cleansers). industrial additives & materials - textile & leather chemicals (finishing additives & treatments). industrial additives & materials - water treatment chemicals (water treatment additives). Approvals: REACH-registered, USDA-certified 100% BioBased content, Readily Biodegradable. CAS No. Product ID: Amphi® CL. Molecular formula: 1,4-Dioxane-free, 100% Carbon Renewable (RCI), Bio-based, Biodegradable, Envir | |
Nonionic Surfactant Quick inquiry Where to buy Suppliers range | Non ionic surfactant is a highly versatile biosurfactant that utilizes the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is TSCA-approved and REACH-registered, making it perfect for industrial use as a dispersant, emulsifier, and wetting agent. Amphi® M a number of exceptional attributes, including low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. It is USDA-certified, readily biodegradable, and free from prop 65 issues and 1,4-dioxane. Additionally, it is non-GMO and palm oil-free, with a low carbon footprint. Uses: Coalescing agent, degreaser, dispersant, dispersant, emulsifier, scouring agent, solubilizer, solvent, surfactant, surfactant (anionic), surfactant (nonionic), wetting agent. Group: Case ingredients - additives (dispersing & wetting additives, functional additives). fluids & lubricants - additives (other additives, performance additives, surface protective additives). agrochemicals - adjuvants & formulation ingredients (dispersants & emulsifiers, stickers, surfactants & wetting agents). cleaning ingredients - cleaning aids (detergents & degreasers, emulsifiers & demulsifiers). cosmetic ingredients - functionals (emulsifiers, solubilizers & dispersants). industrial additives & materials - paper & pulp chemicals (finishing additives & treatments). industrial additives & materials - processing aids (polymerization additives). cleaning ingredients - soaps & surfactants (blends & other surfactants). cosmetic ingredients - surfactants & cleansers (blends & other cleansers). industrial additives & materials - textile & leather chemicals (finishing additives & treatments). industrial additives & materials - water treatment chemicals (water treatment additives). Alternative Names: Glycolipids, sophorose-contg., Candida bombicola-fermented, from D-glucose and mahua Madhuca longifolia fats and glyceridic oils. Approvals: TSCA-approved, REACH-registered, CleanGredients-listed wi | |
PBTC. (2-Phosphonobutane-1,2,4,-Tricarboxylic Acid) Quick inquiry Where to buy Suppliers range | PBTC. (2-Phosphonobutane-1,2,4,-Tricarboxylic Acid). Uses: Water treatment: scale and corrosion inhibiting agent in water treatment systems such as cooling systems, boilers and water towers. -oil and gas industry: scale and corrosion inhibitor agent in the oil and gas industry. -chemical products industry: chelating and stabilizing agent in the manufacture of chemical products. -textile industry: pbtc is used in the textile dyeing and finishing process to prevent the formation of metallic salt scales and improve the fixation of dyes in textile fibers. -paints and coatings industry: pbtc is used as a dispersing and stabilizing agent in the formulation of paints and coatings. helps prevent pigment agglomeration and maintain the stability of formulations. ?. Group: PBTC. CAS No. 253-733-5. Pack Sizes: IBC'S. Product ID: UN3265. | |
Potassium Hydroxide/ Caustic Potash Quick inquiry Where to buy Suppliers range | Potassium Hydroxide is more commonly known as Caustic Potash. It is stable at elevated temperatures and is pretty non-volatile. Potassium Hydroxide can be used in a variety of applications such as industrial, food, chemical, and manufacturing. It can also serve as a chemical intermediate for photographic chemicals and dyes. Uses: Water Treatment, Descaling, Cleaners, Detergents, Refractories, Fertilizers. Alternative Names: Caustic Potash, KOH. CAS No. 1310-58-3. Pack Sizes: 55 Lb, 50 Lb. | USA |
Small particle size silica sol, diameter : 14-16 nm, acidic Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Small particle size silica sol, diameter : 9-11 nm, acidic Quick inquiry Where to buy Suppliers range | Acidic silica sol is a colloidal solution formed by the uniform diffusion of silica particles in water. The pH is 2-4. It has many excellent properties and characteristics. As a fine chemical product, it is widely used in textiles, electronics, refractory materials, and solid batteries. , food, synthetic resin, metal surface treatment, inorganic architectural coatings, agricultural fertilizers and other fields. Ion exchange method is the most mature preparation process for preparing acidic silica sol. This method uses water glass as a raw material and can usually be divided into three steps: preparation of active silicic acid, preparation of alkaline silica sol and cation exchange. Uses: ·Used as a binder for various refractories ·For thin shell investment casting ·For catalyst manufacturing and catalyst supports ·Paper industry: it can be used as an anti-sticking agent for cellophane, a pretreatment agent for photographic paper, and an anti-slip agent for cement bags, etc. ·Textile industry: used as a sizing agent to improve the spinnability of wool and rabbit hair ·Used as silicon steel tablet, treatment agent, CRT dispersant, etc. Group: Colloidal Silica. Purity: 1.19-1.21 g/cm³. | |
Soda Ash Quick inquiry Where to buy Suppliers range | Soda Ash, also known as Sodium Carbonate is light density ash with absorptive properties. Soda Ash is soluble in water. Its appearance is a solid white granular. Soda Ash has very many different uses including pH control, waste water treatment, and ceramics. Uses: Water Softener, Acid Neutralizer, Glass Manufactory. Alternative Names: Disodium Carbonate, Sodium Carbonate. CAS No. 497-19-8. Pack Sizes: 50 Lb. | USA |
Sodium Bicarbonate No. 1 Quick inquiry Where to buy Suppliers range | Sodium Bicarbonate, commonly recognized as baking soda, enjoys extensive utilization across various industries, spanning from food to cleaning. It serves as a highly effective buffering agent, odor absorber, acid neutralizer, and even a gentle natural abrasive. When introduced into pool water, the addition of baking soda elevates both pH and alkalinity levels, thereby enhancing water clarity and stability. Uses: Food, Beverage, pH Control, Water Treatment. Alternative Names: Baking Soda, Bicarbonate of Soda, Sodium Hydrogen Carbonate. Grades: USP, FCC. CAS No. 144-55-8. Pack Sizes: 50 lb. | USA |
Sodium Bicarbonate No. 5 Quick inquiry Where to buy Suppliers range | Sodium Bicarbonate, commonly referred to as baking soda, enjoys widespread application across numerous industries, including food and cleaning. It functions effectively as a versatile buffering agent, odor absorbent, acid neutralizer, and even as a gentle natural abrasive. Uses: Food, Beverage, pH Control, Water Treatment. Alternative Names: Baking Soda, Bicarbonate of Soda, Sodium Hydrogen Carbonate. Grades: USP, FG. CAS No. 144-55-8. Pack Sizes: 50lb. | USA |
Sodium Chlorate Quick inquiry Where to buy Suppliers range | International Dioxcide manufactures a proprietary mixture of sodium chlorate and hydrogen peroxide, which is used to produce chlorine dioxide for biocidal and oxidative water treatment applications. Uses: Chemical precursors. Group: sodium chlorate. Categories: NaClO3. | International Dioxcide |
Sodium Hexametaphosphate Quick inquiry Where to buy Suppliers range | Sodium Hexametaphosphate. Uses: Water treatment: to prevent scaling and corrosion in pipes and equipment. water conditioning agent to improve the quality of drinking water and reduce water hardness. detergents and cleaning products: as a mineral sequestering agent and water softener. textile industry: it is used in the textile dyeing and printing process to improve the fixation of dyes and prevent the formation of stains and discoloration on fabrics. chemical products industry: dispersing and stabilizing agent in the manufacture of chemical products such as paints, adhesives, ceramics and personal care products. cosmetics industry: it is used in the manufacture of cosmetics and personal care products as a viscosity stabilizer. Food grade. Group: Industrial Chemicals. CAS No. 68915-31-1. Pack Sizes: Bags, Super sacks. Molecular formula: Molecular formula: (NaPO3)6. Categories: triglyceride. | |
Sodium Hydroxide / Caustic Soda Beads Quick inquiry Where to buy Suppliers range | Sodium Hydroxide, also known as Caustic Soda or Lye, is used in all kinds of chemical processes. Because of the bead form, there is no dust scattering when handling the material and the solution rate is much quicker than other forms. Caustic Soda is widely used in many different industrial, commercial, and manufacturing applications like water treatment, chemical blending, detergents and more. Uses: Water Treatment, Detergents, Cleaners, pH Control, Scale & Corrosion Control, Paint Strippers. Alternative Names: NaOH, Caustic Soda, Sodium Hydroxide, Caustic, Lye. CAS No. 1310-73-2. Pack Sizes: 50 Lb, 500 Lb Drums. | USA |
Sodium Metabisulfite Quick inquiry Where to buy Suppliers range | Sodium Metabisulfite is a chemical used in many different applications such as water treatment, fungicide, sanitizer, and even photography. It can also be used as a dechlorinating and reducing agent. Sodium Metabisulfite can also be used in tree stump removal. It is a source of sulfur dioxide. Uses: Dechlorinating Agent, Reducing Agent, Water Treatment, Fungicide, Sanitizer, Photography, Tree Stump Removal. Alternative Names: Disodium Pyrosulfite, E 223, SMBS, Sodium Bisulfite Anhydrous, Sodium Disulfite, Sodium Hydrogen Sulfite, Sodium Pyrosulfite. Grades: NF, Food, Photo, FCC. CAS No. 7681-57-4. Pack Sizes: 50 Lb. | USA |
Sodium Thiosulfate Quick inquiry Where to buy Suppliers range | Sodium Thiosulfate Pentahydrate is a source of Sulfide Ion and a reducing agent. It is water soluable and is commonly used in water treatment to remove chlorine. It is even used in hot packs as an agent in exothermic phase change! Uses: Water Treatment, Chrome Plating, Dechlorination Agent, Photography, Gold Mining. Alternative Names: Hypo, Rice Crystals, Sodium Hyposulfite Pentahydrate, Sodium Thiosulphate Pentahydrate. Grades: Technical. CAS No. 10102-17-7. Pack Sizes: 55 Lb, 50 Lb. | USA |
Sodium Tripolyphosphate Quick inquiry Where to buy Suppliers range | Sodium Tripolyphosphate is a multi purpose phosphate used in a variety of applications. It can be used in cleaning and preparation of surfaces before painting. STPP works well in reducing moisture loss during thawing and cooking, and the emulsification of fat and protein. STPP is also used for poultry and seafood applications. It is a fast dissolving free flowing white granular. Uses: Animal Feed, Cheese, Potable Water Treatment. Alternative Names: STPP, Penta sodium Triphosphate, E 451. Grades: Food. CAS No. 7758-29-4. Pack Sizes: 50 lb. | USA |
Strong Acid Cation Resin,Macroporous,Light grey to light brown,MC:45-50%,ParticleSizeRange:0.315-1.25mm(≥95) Quick inquiry Where to buy Suppliers range | Strong Acid Cation Resin,Macroporous,Light grey to light brown,MC:45-50%,ParticleSizeRange:0.315-1.25mm(≥95). Uses: ·Water and chemical treatment. Group: Strong Acid Cation Resin. | |
Strong Acid Cation Resin,Macroporous,MC:45-50%,ParticleSizeRange:0.45-1.25mm(≥95) Quick inquiry Where to buy Suppliers range | Strong Acid Cation Resin,Macroporous,MC:45-50%,ParticleSizeRange:0.45-1.25mm(≥95). Uses: ·Water and chemical treatment. Group: Strong Acid Cation Resin. |