American Chemical Suppliers
A directory of where to buy chemicals in the USA, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices or more information.
Product | Description | |
---|---|---|
Hydroxypropyl cellulose, M.W. 100,000 Quick inquiry Where to buy Suppliers range | Hydroxypropyl cellulose, M.W. 100,000. Group: Polymers. CAS No. 9004-64-2. | |
Hydroxypropyl cellulose, Mw : 60 kDa Quick inquiry Where to buy Suppliers range | Hydroxypropyl cellulose (HPC) is an ether of cellulose. It presents as a white to light creamy powder. It is formed when some of the hydroxyl groups in consecutive glucose units are hydroxypropylated. Hydroxypropyl cellulose (HPC) is biocompatible in nature and exhibits a lower critical solution temperature (LCST). It is prepared by reacting cellulose with alkali to generate alkali cellulose, and then continuously reacting with propylene oxide. HPC is soluble in water, the solubility is lower than room temperature, and the viscosity is inversely proportional to the temperature. Hydroxypropyl cellulose is mainly used as an ingredient in pharmaceutical products, and care must be taken to avoid corrosion of process vessels during production. Uses: ·Used as a binder in ceramics and glazes ·Food industry: used as emulsifier, stabilizer, suspending agent, thickener, film-forming agent ·Daily chemical industry: used for the manufacture of cosmetics such as creams, shampoos, lotions, etc. ·Used as matrix material to prepare matrix sustained-release tablets, sustained-release pellets and double-layer sustained-release tablets. Group: Chemically Modified Hydrocolloids. CAS No. 9004-64-2. Molecular Weight: Average Mw ~60 kDa. InChIKey: 891.2 ?. Melting Point: 492.8 ?. Purity: 0.5 g/mL at 25 °C (lit.). Density: H2O: insoluble (above 45 °C) polar organic solvents: soluble. | |
Hydroxypropyl Chitosan Quick inquiry Where to buy Suppliers range | Hydroxypropyl Chitosan is an antibacterial used to make organic rectorite-based nanofibrous mats with bacterial inhibition. Hydroxypropyl Chitosan has been shown to exhibit inhibitory effects on the levels of Fe, Zn and Ca in liver, heart, lung, spleen, kidney and femur at high dosages in mice. Synonyms: Chitosan, 2-hydroxypropyl ether; Chitofilmer; Chitofilmer HV; 2-Hydroxypropyl Ether Chitosan. Grades: 95%. CAS No. 84069-44-3. | |
Hydroxypropyl Chitosan Quick inquiry Where to buy Suppliers range | Hydroxypropyl Chitosan is an antibacterial used to make organic rectorite-based nanofibrous mats with bacterial inhibition. Hydroxypropyl Chitosanhas been shown to exhibit inhibitory effects on the levels of Fe, Zn and Ca in liver, heart, lung, spleen, kidney and femur at high dosages in mice. Group: Biochemicals. Grades: Highly Purified. CAS No. 84069-44-3. Pack Sizes: 100mg, 1g. Molecular Formula: [C16H33NO7]x. US Biological Life Sciences. | Worldwide |
Hydroxypropyl-gamma-cyclodextrin Quick inquiry Where to buy Suppliers range | solid. Group: Heterocyclic Organic Compound. Alternative Names: 2-HYDROXYPROPYL-GAMMA-CYCLODEXTRIN;HYDROXYPROPYL-GAMMA-CYCLODEXTRIN;HGC;HYDROXYPROPYL G-CYCLODEXTRIN;2-Hydroxypropyl-g-cyclodextrin. CAS No. 116502-52-4. Molecular formula: C72H128O48. Mole weight: 1761.76. Boiling Point: 216-217°C(lit.). Melting Point: 250°C (dec.)(lit.). Flash Point: 227°F. Density: 1.202g/mL(lit.). Safty Description: 24/25. | |
Hydroxy Propyl Guar Quick inquiry Where to buy Suppliers range | Hydroxy Propyl Guar | |
Hydroxypropyl methacrylate,mixture of isomers Quick inquiry Where to buy Suppliers range | Hydroxypropyl methacrylate,mixture of isomers. Group: Polymer/Macromolecule. Alternative Names: PROPYLENE GLYCOL MONOMETHACRYLATE.beta.-Hydroxypropylmethacrylate;1, 2-propanediol, 2-methyl, monomethacrylate;1, 2-propanediol, monomethacrylate;2-hydroxypropylmethacrylate, mixtureofisomers;2-methyl-2-propenoicaci2-hydroxymethylethylester;2-Propenoicacid, 2-m. Grades: PRACTICAL. CAS No. 27813-02-1. Product ID: ACM27813021. Molecular formula: H2C=C(CH3)CO2C3H6OH. Mole weight: 144.2. Boiling Point: 93-95°C(9mm). Melting Point: -89. Flash Point: 208°F. Density: 1.028 (25°C). | |
Hydroxypropyl methyl cellulose Quick inquiry Where to buy Suppliers range | 25g Pack Size. Group: Biochemicals, Carbohydrates. Formula: N/A. CAS No. 9004-65-3. Prepack ID 35624901-25g. See USA prepack pricing. | |
Hydroxypropylmethylcellulose Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropyl Methylcellulose Quick inquiry Where to buy Suppliers range | Nonionic water-soluble cellulosic polymers which provides thickening in a wide range of applications. Viscosity 60,000 - 90,000cP in 2% solution. Uses: Shampoos, gels, serum, lotions & creams, hair preparations. Group: Rheology Modifiers. Alternative Names: Hydroxypropyl methyl cellulose. CAS No. 9004-65-3. Product ID: ACM9004653-3. Appearance: Off-white to yellowish free flowing powder, faint odor. Density: 1.39g/ml. | |
Hydroxypropyl Methyl Cellulose Quick inquiry Where to buy Suppliers range | Hydroxypropyl Methyl Cellulose. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. Alternative Names: Hydroxypropyl Methylcellulose ; Propylene Glycol Ether of Methylcellulose ; Modified Cellulose ; HPMC. CAS No. 9004-65-3. Product ID: PE-0288. | |
Hydroxypropyl Methyl Cellulose Quick inquiry Where to buy Suppliers range | Hydroxypropyl Methyl Cellulose. Group: Non-ionic Surfactants. Alternative Names: MODIFIED CELLULOSE;PROPYLENE GLYCOL ETHER OF METHYLCELLULOSE;HPMC;HYPOMELLOSE 2208;HYPOMELLOSE 2906;HYPOMELLOSE 2910;HYPROMELLOSE;HYPROMELLOSE, 2208. CAS No. 9004-65-3. Molecular formula: C3H7O *. Mole weight: 59.08708. Density: 1.39. | |
Hydroxypropyl Methyl Cellulose Quick inquiry Where to buy Suppliers range | Hydroxypropyl Methyl Cellulose. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. Alternative Names: Hydroxypropyl Methylcellulose ; Propylene Glycol Ether of Methylcellulose ; Modified Cellulose ; HPMC. CAS No. 9004-65-3. Product ID: PE-0138. | |
Hydroxypropyl Methyl Cellulose Quick inquiry Where to buy Suppliers range | Hydroxypropyl Methyl Cellulose. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. Alternative Names: Hydroxypropyl Methylcellulose ; Propylene Glycol Ether of Methylcellulose ; Modified Cellulose ; HPMC. CAS No. 9004-65-3. Product ID: PE-0223. | |
Hydroxypropyl Methyl Cellulose Quick inquiry Where to buy Suppliers range | Hydroxypropyl Methyl Cellulose. Uses: Used for research and manufacturing. Group: Cosmetic Ingredients. Alternative Names: Hydroxypropyl Methylcellulose ; Propylene Glycol Ether of Methylcellulose ; Modified Cellulose ; HPMC. CAS No. 9004-65-3. Pack Sizes: 25, 100, 250 g in poly bottle. Product ID: CDC10-0014. | |
Hydroxypropylmethylcellulose, 2% viscosity: 6mPa.s, Methoxy: 28-30%; Hydroxypropyl: 7.0-12% Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropyl methyl cellulose acetate succinate Quick inquiry Where to buy Suppliers range | Hydroxypropyl methyl cellulose acetate succinate. Group: Heterocyclic Organic Compound. Alternative Names: Cellulose, 2-hydroxypropylmethylehter, acetatehydrogenbutanedioate; HYDROXYPROPYL METHYL CELLULOSE ACETATE SUCCINATE;HPMCAS;Hypromellose Acetate Succinate (100 mg);Hydroxypropyl Methyl cellulose acetate succinate JPE. CAS No. 71138-97-1. Mole weight: 0. | |
Hydroxypropylmethylcellulose, average Mn ~10 kDa Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Molecular Weight: Average Mn ~10 kDa. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, average Mn ~120 kDa Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Molecular Weight: Average Mn ~120 kDa. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, average Mn ~86 kDa Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Molecular Weight: Average Mn ~86 kDa. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, average Mn ~90 kDa Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Molecular Weight: Average Mn ~90 kDa. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropyl Methyl Cellulose (HPMC) Quick inquiry Where to buy Suppliers range | Hydroxypropyl Methyl Cellulose (HPMC) is a thickening and stabilizing agent that is often used in the food, pharmaceutical, and cosmetic industries. It is a chemically modified form of cellulose, which is a natural polymer found in plants. HPMC is derived from cellulose by treating it with propylene oxide and methyl chloride, which adds hydroxypropyl and methyl groups to the cellulose backbone. This modification changes the properties of cellulose, making it soluble in both water and organic solvents. In cosmetics, HPMC is used to create a gel-like consistency in lotions and creams, as well as to increase the viscosity of hair care products. Uses: 1. Hydroxypropyl Methyl Cellulose (HPMC) is commonly used as a thickener, binder, and emulsifier in various cosmetic and personal care products. 2. It is also used as a food additive to improve texture, prevent crystallization, and enhance the shelf life of food products. 3. HPMC is used in the pharmaceutical industry as a binder, suspending agent, and as a component of controlled release drug delivery systems. 4. It is widely used in the construction industry as a cement additive, to improve workability, increase water retention, and reduce cracking. 5. HPMC can also be used as a lubricant in the production of tablets and capsules. 6. It has applications in the paper industry as a coating and sizing agent. 7. HPMC is also used in the textile industry as a sizing agent, to improve yarn strength and abrasion resistance. 8. In addition, it has potential applications in the fields of biomedicine and biotechnology as a drug delivery vehicle and tissue engineering scaffold. Group: Sensory Modifiers. CAS No. 9004-65-3. Product ID: ACM9004653-34. Appearance: white to off-white fibrous or granular powder. | |
Hydroxy Propyl Methyl Cellulose (HPMC) Quick inquiry Where to buy Suppliers range | Hydroxy Propyl Methyl Cellulose (HPMC). | CA, FL & NJ |
Hydroxypropylmethylcellulose, II Type, viscosity: 100000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, II Type, viscosity: 1000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, II Type, viscosity: 100 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, II Type, viscosity: 15000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, II Type, viscosity: 4000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, II Type, viscosity: 400 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, I Type, viscosity: 100 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, I Type, viscosity: 20000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, I Type, viscosity: 30 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, I Type, viscosity: 4000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, I Type, viscosity: 400 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, Type II, 2% viscosity: 100000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, Type II, 2% viscosity: 10000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, Type II, 2% viscosity: 40000 mPa.s Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, USP, 2% viscosity: 15 mPa.s, Methoxy: 28-30%; Hydroxypropyl: 7.0-12% Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, USP, 2% viscosity: 3 mPa.s, Methoxy: 28-30%; Hydroxypropyl: 7.0-12% Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, USP, 2% viscosity: 50 mPa.s, Methoxy: 28-30%; Hydroxypropyl: 7.0-12% Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, viscosity : 2600-5600 cP, 2 % in H2O(20 °C)(lit.) Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Molecular Weight: ~86 kDa. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, viscosity : 40-60 cP, 2 % in H2O(20 °C)(lit.) Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Molecular Weight: ~22 kDa. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylmethylcellulose, viscosity : 80-120 cP, 2 % in H2O(20 °C)(lit.) Quick inquiry Where to buy Suppliers range | Hydroxypropyl methylcellulose (HPMC) is a non-ionic cellulose ether made of natural polymer material cellulose through a series of etherification. It is an odorless, tasteless and nontoxic white powder that swells in cold water to a clear or slightly hazy colloidal solution. Hydroxypropyl methylcellulose is partly substituted by o-methyl group and partly substituted by o-2-hydroxypropyl group, and is divided into different grades because of different viscosity and degree of substitution. It has the characteristics of thickening, dispersing, emulsification, film-forming, suspension, adsorption, surface activity, water retention and protective colloid. Uses: ·Emulsifiers, Thickeners and Suspending Agents ·For the development of controlled release drugs. ·Binders, lubricants, steric stabilizers and water retention aids. Group: Chemically Modified Hydrocolloids. CAS No. 9004-65-3. Molecular Weight: ~26 kDa. Boiling Point: 225-230 °C. Purity: 1.39 g/cm3. Density: H2O: 50 mg/mL, clear to very faintly turbid, faintly yellow. | |
Hydroxypropylpyrrole; 97% Quick inquiry Where to buy Suppliers range | Hydroxypropylpyrrole; 97%. Group: Polymers. Alternative Names: 1-(3-Hydroxypropyl)pyrrole, 50966-69-3, 3-(1H-pyrrol-1-yl)propan-1-ol, ACMC-209kr5, SureCN422470, ANW-31167, AKOS008965270, AG-F-71856, QC-3765, AK-32523, KB-08765, A7549, FT-0605630, H0827, I14-100156. CAS No. 50966-69-3. IUPAC Name: 3-pyrrol-1-ylpropan-1-ol. Molecular Weight: 125.17. Molecular Formula: C7H11NO. SMILES: C1=CN(C=C1)CCCO. InChIKey: ORCXGLCMROHGOM-UHFFFAOYSA-N. Boiling Point: 231ºC / 743mmHg. Flash Point: 96.534ºC. Purity: >97.0%(GC). Density: 1.04 g/cm³. | |
Hydroxypropyl starch Quick inquiry Where to buy Suppliers range | Hydroxypropyl starch. Uses: Used for research and manufacturing. Group: Food Ingredients. Alternative Names: Starchhydroxypropylated;Starch 2-hydroxypropyl ether;Hydroxypropyl starch ether;5-[6-[[3,4-dihydroxy-6-(hydroxymethyl)-5-methoxyoxan-2-yl]oxymethyl]-5-[3-(2,3-dihydroxy-2-methylpropoxy)-4-hydroxy-6-(hydroxymethyl)-5-methoxyoxan-2-yl]oxy-3,4-dihydroxyoxan-2-yl]oxy-6-(hydroxymethyl)-2-methyloxane-3,4-diol;HYDROXYPROPYL STARCH;2-hydroxypropyl starch;Hydroxypropylstrke;Starch, hydroxypropyl ether. CAS No. 9049-76-7. Product ID: CDF4-0159. | |
Hydroxypropyl starch Quick inquiry Where to buy Suppliers range | Hydroxypropyl starch. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. Alternative Names: Starchhydroxypropylated; Starch 2-hydroxypropyl ether; Hydroxypropyl starch ether; 5-[6-[[3, 4-dihydroxy-6-(hydroxymethyl)-5-methoxyoxan-2-yl]oxymethyl]-5-[3-(2, 3-dihydroxy-2-methylpropoxy)-4-hydroxy-6-(hydroxymethyl)-5-methoxyoxan-2-yl]oxy-3, 4-dihydroxyoxan-2-yl]oxy-6-(hydroxymethyl)-2-methyloxane-3, 4-diol; HYDROXYPROPYL STARCH; 2-hydroxypropyl starch; Hydroxypropylstrke; Starch, hydroxypropyl ether. CAS No. 9049-76-7. Product ID: PE-0018. | |
Hydroxypropyl starch Quick inquiry Where to buy Suppliers range | Hydroxypropyl starch. Group: Heterocyclic Organic Compound. Alternative Names: Starchhydroxypropylated;Starch 2-hydroxypropyl ether;HYDROXYPROPYL STARCH;modified starch;2-hydroxypropyl starch;Hydroxypropylstrke;Starch, hydroxypropyl ether;Hydroxyl propyl starch. CAS No. 9049-76-7. Molecular formula: (C6H10O5)n. Mole weight: 0. | |
Hydroxypropyl starch Quick inquiry Where to buy Suppliers range | Hydroxypropyl starch. Group: Biochemicals. Grades: Highly Purified. CAS No. 9049-76-7. Pack Sizes: 5g, 10g, 25g, 50g, 100g. Molecular Formula: (C6H10O5)n. US Biological Life Sciences. | Worldwide |
Hydroxypropyl Starch Quick inquiry Where to buy Suppliers range | Pregelatinized starch occurs as a moderately coarse to fine, white to off-white colored powder. It is odorless and has a slight characteristic taste. Examination of fully pregelatinized starch as a slurry in cold water, under a polarizing microscope, reveals no significant ungelatinized granules, i.e. nomaltese crossescharacteristic of the starch birefringence pattern. Examination of samples suspended in glycerin shows characteristic forms depending upon the method of drying used during manufacture: either irregular chunks from drum drying or thin plates. Partially pregelatinized starch (e.g.Starch 1500G and Sepistab ST200) show retention of birefringence patterns typical of unmodified starch granules. Uses: Used for research and manufacturing. Group: Excipients for Liquid Dosage Form. Alternative Names: Amylum pregelificatum; compressible starch; C*PharmGel; Instastarch; Lycatab C; Lycatab PGS; Merigel; National 78-1551; Pharma-Gel; Prejel; Sepistab ST200; Spress B820; Starch 1500 G; Tablitz; Unipure LD; Unipure WG220. Grades: Pharmceutical Excipients. CAS No. 113894-92-1. Product ID: PE-0560. | |
Hydroxypropyl tetrahydropyrantriol Quick inquiry Where to buy Suppliers range | Hydroxypropyl tetrahydropyrantriol. Uses: Use as dispersing agent, emulsifying agent. Use as intermediate in organic synthesis. Alternative Names: L-Gluco-octitol, 1,5-anhydro-6,8-dideoxy-, (7Xi)-. CAS No. 439685-79-7. Product ID: ACM439685797. Molecular formula: C8H16O5. Mole weight: 192.21. | |
Hydroxypuerarin, 3'- Quick inquiry Where to buy Suppliers range | Hydroxypuerarin, 3'-. Group: Biochemicals. CAS No. 117060-54-5. Pack Sizes: 5mg. US Biological Life Sciences. | Worldwide |
Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:2-5nm,OD:<8nm,Length:10-30μm,-OH:~5.6wt% Quick inquiry Where to buy Suppliers range | Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:2-5nm,OD:<8nm,Length:10-30μm,-OH:~5.6wt%. Group: Carbon Nanomaterials. CAS No. 308068-56-6. | |
Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-10nm,OD:10-20nm,Length:10-30μm,-OH:~3.1wt? Quick inquiry Where to buy Suppliers range | Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-10nm,OD:10-20nm,Length:10-30μm,-OH:~3.1wt?. Group: Carbon Nanomaterials. CAS No. 308068-56-6. | |
Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-10nm,OD:20-30nm,Length:10-30μm,-OH:~1.8wt% Quick inquiry Where to buy Suppliers range | Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-10nm,OD:20-30nm,Length:10-30μm,-OH:~1.8wt%. Group: Carbon Nanomaterials. CAS No. 308068-56-6. | |
Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-12nm,OD:30-50nm,Length:10-20μm,-OH:~1.1wt% Quick inquiry Where to buy Suppliers range | Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-12nm,OD:30-50nm,Length:10-20μm,-OH:~1.1wt%. Group: Carbon Nanomaterials. CAS No. 308068-56-6. | |
Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-15nm,OD:>50nm,Length:10-20μm,-OH:~0.71wt% Quick inquiry Where to buy Suppliers range | Hydroxy Purified Multi-walled carbon nanotubes, >95%,ID:5-15nm,OD:>50nm,Length:10-20μm,-OH:~0.71wt%. Group: Carbon Nanomaterials. CAS No. 308068-56-6. | |
Hydroxy Purified Single-walled carbon nanotubes, >90%,ID:0.8-1.6nm,OD:1-2nm,Length:5-30μm,-OH:~4wt% Quick inquiry Where to buy Suppliers range | Hydroxy Purified Single-walled carbon nanotubes, >90%,ID:0.8-1.6nm,OD:1-2nm,Length:5-30μm,-OH:~4wt%. Group: Carbon Nanomaterials. CAS No. 308068-56-6. | |
Hydroxypyridine Quick inquiry Where to buy Suppliers range | 3-Hydroxypyridine. CAS No. 109-00-2. | Pennsylvania PA |
Hydroxypyridine-N-oxide Quick inquiry Where to buy Suppliers range | 2-Hydroxypyridine-N-oxide. CAS No. 13161-30-3. | Pennsylvania PA |
Hydroxypyridinesulfonicacid Quick inquiry Where to buy Suppliers range | Hydroxypyridinesulfonicacid. Group: Heterocyclic Organic Compound. Grades: 97.0%. CAS No. 51498-37-4. Molecular formula: C5H5NO4S. Mole weight: 175.16. | |
Hydroxyregorafenib Quick inquiry Where to buy Suppliers range | A derivative of Regorafenib.Regorafenib is a multi-kinase inhibitor which targets angiogenic, stromal and oncogenic receptor tyrosine kinase. It shows anti-angiogenic activity due to its dual targeted VEGFR2-TIE2 tyrosine kinase inhibition. Grades: > 95%. Molecular formula: C21H15ClF4N4O4. Mole weight: 498.82. | |
Hydroxy ritonavir Quick inquiry Where to buy Suppliers range | Hydroxy ritonavir. Group: Biochemicals. Alternative Names: [5S-(5R*,8R*,10R*,11R*)]-10-Hydroxy-1-[2-(1-hydroxy-1-methylethyl)-4-thiazolyl]-2-methyl-5-(1-methylethyl)-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic Acid 5-Thiazolylmethyl Ester. Grades: Highly Purified. CAS No. 176655-56-4. Pack Sizes: 500ug, 1mg, 2mg, 5mg, 10mg. Molecular Formula: C37H48N6O6S2. US Biological Life Sciences. | Worldwide |
Hydroxy Ritonavir Quick inquiry Where to buy Suppliers range | Hydroxy Ritonavir. Uses: For analytical and research use. Group: Chiral Molecules; COVID-19 Research and Reference Materials; Impurity Standards. Alternative Names: Ritonavir Imp. E (EP), Hydroxy Ritonavir,2,7,10,12-Tetraazatridecanoic acid, 4-hydroxy-13-[2-(1-hydroxy-1-methylethyl)-4-thiazolyl]-12-methyl-9-(1-methylethyl)-8,11-dioxo-3,6-bis(phenylmethyl)-, 5-thiazolylmethyl ester, (3S,4S,6S,9S)-, Thiazol-5-ylmethyl [(1S,2S,4S)-1-Benzyl-2-hydroxy-4-[[(2S)-2-[[[[2-(1-hydroxy-1-methylethyl)thiazol-4-yl]methyl]methyl-carbamoyl]amino]-3-methylbutanoyl]amino]-5-phenylpentyl]carbamate, 2,4,7,12-Tetraazatridecan-13-oic acid, 10-hydroxy-1-[2-(1-hydroxy-1-methylethyl)-4-thiazolyl]-2-methyl-5-(1-methylethyl)-3,6-dioxo-8,11-bis(phenylmethyl)-, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]-. CAS No. 176655-56-4. IUPAC Name: 1,3-thiazol-5-ylmethyl N-[(2S,3S,5S)-3-hydroxy-5-[[(2S)-2-[[[2-(2-hydroxypropan-2-yl)-1,3-thiazol-4-yl]methyl-methylcarbamoyl]amino]-3-methylbutanoyl]amino]-1,6-diphenylhexan-2-yl]carbamate. Molecular formula: C37H48N6O6S2. Mole weight: 736.94. Catalog: APS176655564. SMILES: CC (C)[C@H] (NC (=O)N (C)Cc1csc (n1)C (C) (C)O)C (=O)N[C@H] (C[C@H] (O)[C@H] (Cc2ccccc2)NC (=O)OCc3cncs3)Cc4ccccc4. Format: Neat. Product Type: Impurity. | |
Hydroxy Ritonavir-d3 Quick inquiry Where to buy Suppliers range | Hydroxy Ritonavir-d3. Uses: For analytical and research use. Group: COVID-19 Research and Reference Materials. Catalog: APS001936. Format: Neat. Product Type: Stable Isotope Labelled. | |
Hydroxy Ritonavir-d3 Quick inquiry Where to buy Suppliers range | Hydroxy Ritonavir-d3. Group: Biochemicals. Alternative Names: [5S-(5R*,8R*,10R*,11R*)]-10-Hydroxy-1-[2-(1-hydroxy-1-methylethyl)-4-thiazolyl]-2-methyl-5-(1-methylethyl)-3,6-dioxo-8,11-bis(phenylmethyl)-. Grades: Highly Purified. Pack Sizes: 1mg. US Biological Life Sciences. | Worldwide |
Hydroxysafflor yellow A Quick inquiry Where to buy Suppliers range | Hydroxysafflor yellow A. Group: Biochemicals. CAS No. 78281-02-4. Pack Sizes: 5mg. US Biological Life Sciences. | Worldwide |
Hydroxysafflor Yellow A Quick inquiry Where to buy Suppliers range | Hydroxysafflor Yellow A. Group: Biobased Products. Alternative Names: Safflomin A. Grades: 98%. CAS No. 78281-02-4. Product ID: BBC78281024. Molecular formula: C27H32O16. Mole weight: 612.53. IUPAC Name: (6E)-2,5-dihydroxy-6-[(E)-1-hydroxy-3-(4-hydroxyphenyl)prop-2-enylidene]-2,4-bis[(2S,3R,4R,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]cyclohex-4-ene-1,3-dione. Appearance: Powder. Density: 1.851±0.06 g/ml. SMILES: C1=CC (=CC=C1/C=C/C (=C\2/C (=C (C (=O)C (C2=O) ([C@H]3[C@@H] ([C@H] ([C@@H] ([C@H] (O3)CO)O)O)O)O)[C@H]4[C@@H] ([C@H] ([C@@H] ([C@H] (O4)CO)O)O)O)O)/O)O. | |
Hydroxy Saxagliptin Quick inquiry Where to buy Suppliers range | Hydroxy Saxagliptin. Uses: For analytical and research use. Group: Chiral Molecules. Alternative Names: M2 saxagliptin hydroxylated metabolite, BMS 510849, (1S,3S,5S)-2-[(2S)-2-Amino-2-(3,5-dihydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile,2-Azabicyclo[3.1.0]hexane-3-carbonitrile, 2-[(2S)-2-amino-2-(3,5-dihydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-, (1S,3S,5S)-, 2-Azabicyclo[3.1.0]hexane-3-carbonitrile, 2-[(2S)-amino(3,5-dihydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-, (1S,3S,5S)- (9CI), 5-Hydroxy saxagliptin. CAS No. 841302-24-7. Pack Sizes: 1MG. IUPAC Name: (1S,3S,5S)-2-[(2S)-2-amino-2-(3,5-dihydroxy-1-adamantyl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile. Molecular formula: C18H25N3O3. Mole weight: 331.41. Catalog: APS841302247. SMILES: N[C@H] (C (=O)N1[C@@H] (C[C@@H]2C[C@H]12)C#N)C34CC5CC (O) (CC (O) (C5)C3)C4. Format: Neat. Shipping: Room Temperature. | |
Hydroxy Sprengerinin C, 14- Quick inquiry Where to buy Suppliers range | Hydroxy Sprengerinin C, 14-. Group: Biochemicals. CAS No. 1111088-89-1. Pack Sizes: 5mg. US Biological Life Sciences. | Worldwide |
Hydroxystearic Acid (High Purity) Quick inquiry Where to buy Suppliers range | Hydroxystearic acid is a highly pure, naturally derived fatty acid. Its multi-target mode of action helps correct both conspicuous facial pores and age spots. In-vitro studies showed that hydroxystearic acid is promotes production of collagen I and III. Visibly reduces the appearance of conspicuous facial pores and reduces the appearance of age spots. Makes skin look younger and improves appearance after the age of 30. As a fatty acid, hydroxystearic acid also has emulsifying and cleansing properties. Uses: Anti-aging serums, creams, lotions, conspicuous facial pore applications. Group: Skin Actives. CAS No. 629-22-1. Product ID: ACM629221-3. Appearance: White to off-white powder. |