A directory of where to buy chemicals in the USA, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices or more information.
| Product | Description | |
|---|---|---|
| Polyester bis-MPA dendron, 8 hydroxyl, 1 amine | calculated mol. wt. 950. Uses: Amine dendrons can be covalently attached through conjugation to carboxyl groups, primary amines, or sulfhydryl groups. amines can also attach to oxidized carbohydrate groups (usually aldehydes) by reductive amination. Group: Dendrimers. Alternative Names: bisMPA dendrimer, bisMPA dendron. Pack Sizes: 250 mg in glass insert. Molecular formula: generation 3. CCC (COC (=O)c1ccc (N)cc1) (COC (=O)C (C) (COC (=O)C (C) (CO)CO)COC (=O)C (C) (CO)CO)COC (=O)C (C) (COC (=O)C (C) (CO)CO)COC (=O)C (C) (CO)CO. 1S/C43H67NO22/c1-8-43 (25-60-30 (53)28-9-11-29 (44)12-10-28, 26-65-35 (58)41 (6, 21-61-31 (54)37 (2, 13-45)14-46)22-62-32 (55)38 (3, 15-47)16-48)27-66-36 (59)42 (7, 23-63-33 (56)39 (4, 17-49)18-50)24-64-34 (57)40 (5, 19-51)20-52/h9-12, 45-52H, 8, 13-27, 44H2, 1-7H3. ABFRDJWLXWYYKC-UHFFFAOYSA-N. |  |
| Polyester bis-MPA dendron, 8 hydroxyl, 1 amine | generation 3. Group: Dendrimers. |  |
| Polyester bis-MPA dendron, 8 hydroxyl, 1 azide | generation 3, 95%. Group: Dendrimers. | |
| Polyester bis-MPA dendron, 8 hydroxyl, 1 azide | calculated mol. wt. 956. Uses: Azide dendrons can be coupled to acetylene functionalized molecules, including acetylene dendrons to form asymmetric dendrimers. Group: Dendrimers. Alternative Names: bisMPA dendrimer, bisMPA dendron. CAS No. 873849-89-9. Pack Sizes: 250 mg in glass insert. Molecular formula: generation 3. CC (CO) (CO)C (=O)OCC (C) (COC (=O)C (C) (CO)CO)C (=O)OCC (C) (COC (=O)C (C) (COC (=O)C (C) (CO)CO)COC (=O)C (C) (CO)CO)C (=O)OCCCCCCN=[N+]=[N-]. 1S/C41H69N3O22/c1-35 (14-45, 15-46) 28 (53) 61-24-40 (6, 25-62-29 (54) 36 (2, 16-47) 17-48) 33 (58) 65-22-39 (5, 32 (57) 60-13-11-9-8-10-12-43-44-42) 23-66-34 (59) 41 (7, 26-63-30 (55) 37 (3, 18-49) 19-50) 27-64-31 (56) 38 (4, 20-51) 21-52/h45-52H, 8-27H2, 1-7H3. RHUOETMPCLTKIU-UHFFFAOYSA-N. | |
| Polyester bis-MPA dendron, 8 hydroxyl, 1 thiol, generation 3 | calculated mol.wt.890.9. Uses: Thiol dendrons can be conjugated to varius noble surfaces or coupled to unsaturated carbon-carbon bonds using various radical initiators. Group: Dendrimers. Alternative Names: bisMPA dendrimer, bisMPA dendron. Pack Sizes: 250 mg in glass insert. Molecular formula: generation 3. CC (O) (O)C (=O)OCC (C) (COC (=O)C (C) (O)O)C (=O)OCC (C) (COC (=O)C (C) (COC (=O)C (C) (O)O)COC (=O)C (C) (O)O)C (=O)OCCS. 1S/C29H46O22S/c1-23(16(30)45-8-9-52, 10-46-17(31)24(2, 12-48-19(33)26(4, 37)38)13-49-20(34)27(5, 39)40)11-47-18(32)25(3, 14-50-21(35)28(6, 41)42)15-51-22(36)29(7, 43)44/h37-44, 52H, 8-15H2, 1-7H3. JKFYZSQKFIZEKR-UHFFFAOYSA-N. | |
| Polyester bis-MPA dendron, 8 hydroxyl, 1 thiol, generation 3 | 95%. Group: Dendrimers. | |
| Polyester fibers | Polyester fibers. Group: Polymers. CAS No. 80595-68-2. | |
| Polyester Resin | Polyester Resin. Group: Polymers nano materials. CAS No. 26123-45-5. 99%. | |
| Polyester short-cut fiber | Polyester short-cut fiber. Group: Polymers. CAS No. 25038-59-9. Product ID: ethane-1,2-diol; terephthalic acid. Molecular formula: 228.2g/mol. Mole weight: C10H12O6. C1=CC(=CC=C1C(=O)O)C(=O)O.C(CO)O. InChI=1S/C8H6O4. C2H6O2/c9-7 (10)5-1-2-6 (4-3-5)8 (11)12; 3-1-2-4/h1-4H, (H, 9, 10) (H, 11, 12); 3-4H, 1-2H2. FYIBGDKNYYMMAG-UHFFFAOYSA-N. | |
| Poly(estradiol phosphate) | Estradiol, polyester with phosphoric acid. CAS No. 28014-46-2. Product ID: 6-00330. Molecular formula: [C18H27O6P]n. Mole weight: [370.38]n. Purity: solid. Reference: Categories: Polyestradiol phosphate. |  |
| Polyetheretherketone | PEEK is a lightweight and strong semi-crystalline thermoplastic. Due to its high melting point and low coefficient of thermal expansion, PEEK has high dimensional stability. As such, PEEK food handling products can withstand microwave use, dishwasher use, and intense temperatures when cooking directly on heat. Uses: Peek is safe for direct contact with delicate foods like raw lettuce or fresh dairy products even during the production process. for this reason, peek food handling components are used in both food packaging and food production processes. some common products made from peek resin include blenders, kneaders, mixing paddles and scrapers, and valves and nozzles on coffee machines. Group: Food grade plastic. CAS No. 29658-26-2. 90%. | |
| Polyetheretherketone | PEEK is a lightweight and strong semi-crystalline thermoplastic. Due to its high melting point and low coefficient of thermal expansion, PEEK has high dimensional stability. As such, PEEK food handling products can withstand microwave use, dishwasher use, and intense temperatures when cooking directly on heat. Uses: Peek is safe for direct contact with delicate foods like raw lettuce or fresh dairy products even during the production process. for this reason, peek food handling components are used in both food packaging and food production processes. some common products made from peek resin include blenders, kneaders, mixing paddles and scrapers, and valves and nozzles on coffee machines. Group: Polymers nano materials. CAS No. 29658-26-2. 90%. | |
| Polyetherimide | Polyetherimide. Group: Polyetherimide (pei). Alternative Names: Poly(bisphenol A-co-4-nitrophthalic anhydride-co-1,3-phenylenediamine), PEI, Poly(bisphenol A anhydride-co-1,3-phenylenediamine), Poly(bisphenol A dianhydride-co-1,3-phenylenediamine), Poly(ether imide), Poly-[2,2'bis(4-(3,4-dicarboxyphenoxy)phenylpropane)-1,3-phenylene bisimide], Polyetherimide. CAS No. 61128-46-9. Product ID: benzene-1,3-diamine; 5-[4-[2-[4-[(1,3-dioxo-2-benzofuran-5-yl)oxy]phenyl]propan-2-yl]phenoxy]-2-benzofuran-1,3-dione. Molecular formula: 30,000. Mole weight: (C39H30N2O6)n. CC (C) (C1=CC=C (C=C1)OC2=CC3=C (C=C2)C (=O)OC3=O)C4=CC=C (C=C4)OC5=CC6=C (C=C5)C (=O)OC6=O. C1=CC (=CC (=C1)N)N. InChI=1S/C31H20O8. C6H8N2/c1-31 (2, 17-3-7-19 (8-4-17)36-21-11-13-23-25 (15-21)29 (34)38-27 (23)32)18-5-9-20 (10-6-18)37-22-12-14-24-26 (16-22)30 (35)39-28 (24)33; 7-5-2-1-3-6 (8)4-5/h3-16H, 1-2H3; 1-4H, 7-8H2. VYLFLJXGGIUQKT-UHFFFAOYSA-N. 96%. | |
| Polyetherimide, (PEI), film | Polyetherimide, (PEI), film. Group: Polyetherimide (pei). | |
| Polyetherimide, (PEI), granule, 3 mm nominal granule size, weight 200 g, natural | Polyetherimide, (PEI), granule, 3 mm nominal granule size, weight 200 g, natural. Group: Polyetherimide (pei). | |
| Polyetherketoneketone, (PEKK), granule, 3mm nominal granule size, natura | Polyetherketoneketone, (PEKK), granule, 3mm nominal granule size, natura. Group: Polyetheretherketone (peek). Alternative Names: EK316300. | |
| Polyetherketone, (PEK), film, thickness 0.04 mm, size 100×100 mm | Polyetherketone, (PEK), film, thickness 0.04 mm, size 100×100 mm. Group: Polyetherketone (pek). | |
| Poly(ether sulfone) | Poly(vinyl sulfonate, potassium). CAS No. 26182-60-5. Product ID: 5-15021. Molecular formula: [C2H3O3SK]n. Categories: Polyethersulfone. | |
| Polyether Sulfone | Polyether Sulfone. Group: Polymers. | |
| Polyethoxylated castor oil | Polyethoxylated castor oil. CAS No: 61791-12-6 |  Sarchem Laboratories New Jersey NJ |
| poly(ethyl acrylate) | Ethyl acrylate, stabilized appears as a clear colorless liquid with an acrid odor. Flash point 60°F. May polymerize exothermically if heated or contaminated. If the polymerization takes place inside a container, the container may rupture violently. Auto ignition temperature 721°F (383°C) (NTP). Less dense than water. Vapors heavier than air. Used to make paints and plastics.;Liquid;Liquid;COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colourless mobile liquid; lachrymator/intense, harsh, fruity aroma;Colorless liquid with an acrid odor.;Colorless liquid with an acrid odor. Group: Polymers. CAS No. 9003-32-1. Pack Sizes: 1 kg. Product ID: ethyl prop-2-enoate. Molecular formula: 100.12g/mol. Mole weight: C5H8O2. CCOC(=O)C=C. InChI=1S/C5H8O2/c1-3-5(6)7-4-2/h3H, 1, 4H2, 2H3. JIGUQPWFLRLWPJ-UHFFFAOYSA-N. | |
| Polyethyl acrylate | Polyethyl acrylate. Uses: Designed for use in research and industrial production. Additional or Alternative Names: 2-Propenoicacid,ethylester,homopolymer;Ethyl2-propenoate,homopolymer;Ethylacrylate,homopolymer;Poly(acrylicacid,ethylester);POLY(ETHYL ACRYLATE);ETHYL ACRYLATE LATEX;ETHYL ACRYLATE RESIN;POLY(ETHYL ACRYLATE), SOLUTION IN TOLUEN E, AVERAGE MW CA. 95,000 (G. Product Category: Polymer/Macromolecule. CAS No. 9003-32-1. Mole weight: 100000. Density: 1.12. Product ID: ACM9003321. Alfa Chemistry ISO 9001:2015 Certified. |  |
| Poly(ethyl acrylate/acrylic acid) | Poly(ethyl acrylate/acrylic acid). Uses: Designed for use in research and industrial production. Additional or Alternative Names: 2-Propenoicacid,polymerwithethyl2-propenoate;Acrylicacid,ethylacrylatecopolymer;Ethyl2-propenoate,2-propenoicacid,polymer;Ethyl2-propenoate,2-propenoicacidpolymer;Ethylacrylate,acrylicacidcopolymer;Ethylacrylate,acrylicacidpolymer;POLY(ETHYL ACRYLATE/ACR. Product Category: Polymer/Macromolecule. CAS No. 25085-35-2. Product ID: ACM25085352. Alfa Chemistry ISO 9001:2015 Certified. | |
| Poly(ethyl acrylate) solution | average Mw ~95,000 by GPC, in toluene. Group: Hydrophobic polymers. | |
| Poly(ethyl acrylate) solution | The polymer product is a hydrophobic material that is insoluble in water or other polar solvents. Uses: Biocompatible pea based copolymer membranes may find several s such as keratoprosthesis. Group: Hydrophobic polymers. Alternative Names: Acrylic acid ethyl ester polymer, Ethyl acrylate homopolymer. CAS No. 9003-32-1. Pack Sizes: 50 g in glass bottle. Product ID: ethyl prop-2-enoate. Molecular formula: average Mw ~95,000 by GPC. Mole weight: CH2CHCOOC2H5;C5H8O2;C5H8O2. CCOC(=O)C=C. 1S/C5H8O2/c1-3-5(6)7-4-2/h3H, 1, 4H2, 2H3. JIGUQPWFLRLWPJ-UHFFFAOYSA-N. | |
| Poly(ethylene) | PE. CAS No. 9002-88-4. Product ID: 6-00142. Categories: Polyethylene. | |
| Poly(ethylene adipate) | antioxidant. CAS No. 24938-37-2. Product ID: 6-00311. Molecular formula: [-OCH2CH2O2C(CH2)4CO]n. Mole weight: Mw 10,000. Properties: mp >300°C. Reference: Merck, 12, 7745. | |
| Poly(ethylene adipate) | The polymer product is a hydrophobic material that is insoluble in water or other polar solvents. Uses: Our hydrophobic polymers are used as coatings, adhesives, fibers, films and engineering plastics. furthermore, they are widely used as biomedical polymers for vascular grafts, implants and ophthalmic applications. Group: Polyethylene (pe). Alternative Names: Ethylene glycol adipate, Poly(ethylene adipate), dihydroxy terminated. CAS No. 24938-37-2. Product ID: ethane-1,2-diol; hexanedioic acid. Molecular formula: average Mw ~10,000 by GPC. Mole weight: [OCH2CH2O2C(CH2)4CO]n. C(CCC(=O)O)CC(=O)O.C(CO)O. InChI=1S/C6H10O4. C2H6O2/c7-5(8)3-1-2-4-6(9)10; 3-1-2-4/h1-4H2, (H, 7, 8)(H, 9, 10); 3-4H, 1-2H2. FZWBABZIGXEXES-UHFFFAOYSA-N. | |
| Poly(ethylene adipate) | average Mw ~10,000 by GPC. Group: Hydrophobic polymers. | |
| Poly(ethylene-alt-maleic anhydride) | average Mw 100,000-500,000, powder. Group: Hydrophilic polymers. | |
| Poly(ethylene-alt-maleic anhydride) | The hydrophilic polymer contains polar or charged functional groups, making it soluble in water. Uses: Viscosity modifier for solution, suspension or emulsion. dispersing aid for insoluble solids. Group: Hydrophilic polymers. Alternative Names: maleic copolymer, maleated copolymer, maleated polymer. CAS No. 9006-26-2. Pack Sizes: Packaging 100, 500 g in poly bottle. Molecular formula: average Mw 100,000-500,000. 1S/C4H2O3.C2H4/c5-3-1-2-4(6)7-3; 1-2/h1-2H; 1-2H2. YYXLGGIKSIZHSF-UHFFFAOYSA-N. | |
| Polyethylene-block-poly(ethylene glycol) | We offer you this block copolymer with good biocompatibility. Uses: Nonionic surfactant. emulsifier for coatings, ceramics, metalworking fluids and inks. lubricant. mold release agent. thickening agent. nonionic surfactant. Group: Poly(ethylene glycol) and poly(ethylene oxide)self-assembly materials. Pack Sizes: 250 g in poly bottle. Molecular formula: average Mn ~1,400. Mole weight: CH3CH2(CH2CH2)X(OCH2CH2)YOH. C=C.OCCO. | |
| Polyethylene-block-poly(ethylene glycol) | average Mn ~2,250. Group: Poly(ethylene glycol) and poly(ethylene oxide). | |
| Polyethylene-block-poly(ethylene glycol) (average Mn ~920) | Polyethylene-block-poly(ethylene glycol) (average Mn ~920). Group: Polyethylene (pe). | |
| Polyethylene-Carbon Filled, (PE), film, thickness 0.08 mm, condition conductive polymer | Polyethylene-Carbon Filled, (PE), film, thickness 0.08 mm, condition conductive polymer. Group: Polyethylene (pe). | |
| Polyethylene chlorinated | Polyethylene chlorinated. Group: Polymers. Alternative Names: Chlorinatedpolyethylene; ETHYLENE RESIN, CHLORINATED; ETHYLENE, CHLORINATED RESIN; POLYETHYLENE, CHLORINATED; Ethene, homopolymer, chlorinated; POLYETHYLENECHLORINATEDWITHCHLORINE (56%); Chlorinated polyethylene (CPE 135-A); chlorinated polyethlene. CAS No. 64754-90-1. 96%. | |
| Poly(ethylene), chlorosulfonated | Poly(ethylene), chlorosulfonated. CAS No. 68037-39-8. Product ID: 6-00307. Purity: Cl 43% S 1.1%. | |
| Polyethylene chlorosulfonated | Ethylene appears as a colorless gas with a sweet odor and taste. It is lighter than air. It is easily ignited and a flame can easily flash back to the source of the leak. Under prolonged exposure to fire or heat the containers may rupture violently and rocket. Can cause explosion.;Ethylene, refrigerated liquid (cryogenic liquid) appears as a pressurized liquid when shipped below 50°F. Colorless with a sweet odor and taste. Vapors arising from the boiling liquid are lighter than air. Easily ignited. Not toxic but is a simple asphyxiant. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. Used as an anesthetic, a refrigerant, and to make other chemicals.;Polyethylene as is a white powder (microbeads). Tough and flexible at room temperatures. (NTP, 1992);GasVapor; GasVapor, Liquid; Liquid;OtherSolid;Liquid;COLOURLESS COMPRESSED GAS WITH CHARACTERISTIC ODOUR.;WHITE SOLID IN VARIOUS FORMS.;Colorless gas with a sweet odor. Group: Polymers. Alternative Names: POLY(ETHYLENE), CHLOROSULFONATED; Chlorosulfonatedpolyvinylchloride resin; ethene, homopolymer, chlorinated, chlorosulfonated; ETHYLENE, CHLOROSULFONATED RESIN; Ethylene resin, chlorosulfonated; Ethyleneresinchlorosulfonated; Poly(ethylene), chlorosulfonated, cont. CAS No. 68037-39-8. Product ID: ethene. Molecular formula: 28.05g/mol. Mole weight: C2H4;CH2=CH2;(C2H4)n;C2H4;C2H4. C=C. InChI=1S/C2H4/c1-2/h1-2H2. VGGS | |
| Poly(ethylene-co-acrylic acid) zinc salt | Poly(ethylene-co-acrylic acid) zinc salt. Group: Hydrophobic polymers. CAS No. 28208-80-2. Product ID: zinc; ethene; prop-2-enoate. Molecular formula: 235.5g/mol. Mole weight: C8H10O4Zn. C=C.C=CC(=O)[O-].C=CC(=O)[O-].[Zn+2]. InChI=1S/2C3H4O2. C2H4. Zn/c2*1-2-3(4)5; 1-2; /h2*2H, 1H2, (H, 4, 5); 1-2H2; /q; ; ; +2/p-2. HENHBQJZXRPLOX-UHFFFAOYSA-L. | |
| Poly(ethylene-co-acrylic acid),zinc salt | Poly(ethylene-co-acrylic acid),zinc salt. Uses: Designed for use in research and industrial production. Additional or Alternative Names: POLY(ETHYLENE-CO-ACRYLIC ACID), ZINC SALT;2-Propenoicacid,polymerwithethene,zincsalt;ETHYLENE/ZINC ACRYLATE COPOLYMER;POLY(ETHYLENE-CO-ACRYLIC ACIDZINC SAL;POLY(ETHYLENE-CO-ACRYLIC ACID), ZINC SAL T, 10 WT. % ACRYLIC ACID;Poly(ethylene-co-acrylic acid) zi. Product Category: Biomaterials. CAS No. 28208-80-2. Product ID: ACM28208802. Alfa Chemistry ISO 9001:2015 Certified. | |
| Polyethylene-co-chlorotrifluoroethylene | Polyethylene-co-chlorotrifluoroethylene. Uses: Designed for use in research and industrial production. Product Category: Polymer/Macromolecule. CAS No. 110872-65-6. Density: 1.65. Product ID: ACM110872656. Alfa Chemistry ISO 9001:2015 Certified. | |
| Poly(ethylene-co-ethyl acrylate) | The polymer product is a hydrophobic material that is insoluble in water or other polar solvents. Uses: Our hydrophobic polymers are used as coatings, adhesives, fibers, films and engineering plastics. furthermore, they are widely used as biomedical polymers for vascular grafts, implants and ophthalmic applications. Group: Hydrophobic polymers. CAS No. 9010-86-0. Product ID: ethene; ethyl prop-2-enoate. Molecular formula: 128.17g/mol. Mole weight: (CH2CH2)x[CH2CH(CO2C2H5)]y. C=C.CCOC(=O)C=C. 1S/C5H8O2.C2H4/c1-3-5(6)7-4-2; 1-2/h3H, 1, 4H2, 2H3; 1-2H2. CGPRUXZTHGTMKW-UHFFFAOYSA-N. | |
| Poly(ethylene-co-ethyl acrylate) | ethyl acrylate 18 wt. %, beads, melt index 20 g/10 min. Group: Hydrophobic polymers. | |
| Poly(ethylene-co-glycidyl methacrylate) | Poly(ethylene-co-glycidyl methacrylate). Uses: Cross-linkable coatings and adhesion promoter. Group: Hydrophobic polymersself assembly and lithographypolymers. Alternative Names: 2-Propenoic acid, 2-methyl-, oxiranylmethyl ester, polymer with ethene, Ethylene-glycidyl methacrylate polymer, Glycidyl methacrylate-ethylene copolymer. CAS No. 26061-90-5. Pack Sizes: 250 g in poly bottle. | |
| Poly(ethylene-co-methacrylic acid) | Poly(ethylene-co-methacrylic acid). Group: Hydrophobic polymers. Alternative Names: ETHYLENE/METHACRYLIC ACID COPOLYMER; POLY(ETHYLENE-CO-METHACRYLIC ACID); 2-methyl-2-propenoicacipolymerwithethene; 2-Propenoicacid,2-methyl-,polymerwithethene; POLY(ETHYLENE-CO-METHACRYLIC ACID)MEL&; POLY(ETHYLENE-CO-METHACRYLIC ACID), MELTINDEX 60; 2-methyl-2-. CAS No. 25053-53-6. Product ID: ethene; 2-methylprop-2-enoic acid. Molecular formula: 114.14g/mol. Mole weight: C6H10O2. CC(=C)C(=O)O.C=C. InChI=1S/C4H6O2.C2H4/c1-3(2)4(5)6; 1-2/h1H2, 2H3, (H, 5, 6); 1-2H2. XSMJZKTTXZAXHD-UHFFFAOYSA-N. | |
| Poly(ethylene-co-methyl acrylate-co-glycidyl methacrylate) | Poly(ethylene-co-methyl acrylate-co-glycidyl methacrylate). Uses: Cross-linkable coatings and adhesion promoter. Group: Hydrophobic polymersself assembly and lithography. Alternative Names: Ethylene-methyl acrylate-glycidyl methacrylate copolymer,Glycidyl methacrylate-ethylene-methyl acrylate copolymer. CAS No. 51541-08-3. Pack Sizes: 250 g in poly bottle. Product ID: ethene; methyl prop-2-enoate; oxiran-2-ylmethyl 2-methylprop-2-enoate. Molecular formula: 256.29g/mol. Mole weight: C13H20O5. CC(=C)C(=O)OCC1CO1.COC(=O)C=C.C=C. 1S/C7H10O3. C4H6O2. C2H4/c1-5(2)7(8)10-4-6-3-9-6; 1-3-4(5)6-2; 1-2/h6H, 1, 3-4H2, 2H3; 3H, 1H2, 2H3; 1-2H2. CNJPFZOQZWIGIB-UHFFFAOYSA-N. | |
| Poly(ethylene-co-propylene-co-5-methylene-2-norbornene) | The polymer product is a hydrophobic material that is insoluble in water or other polar solvents. Uses: Our hydrophobic polymers are used as coatings, adhesives, fibers, films and engineering plastics. furthermore, they are widely used as biomedical polymers for vascular grafts, implants and ophthalmic applications. Group: Hydrophobic polymers. Alternative Names: Ethylene-ethylidenenorbornene-propylene copolymer. CAS No. 25038-36-2. 1S/C9H12. C3H6. C2H4/c1-2-8-5-7-3-4-9(8)6-7; 1-3-2; 1-2/h2-4, 7, 9H, 5-6H2, 1H3; 3H, 1H2, 2H3; 1-2H2/b8-2+;. MPXNNMASLYQCAH-SZPWSVBHSA-N. | |
| Poly(ethylene-co-tetrafluoroethylene) | The polymer product is a hydrophobic material that is insoluble in water or other polar solvents. Uses: Injection molding and extrusion for wire coatings, tubes, films and monofilaments. Group: Hydrophobic polymers. Alternative Names: Ethene, tetrafluoro-, polymerwithethene; tefzel; tetrafluoro-ethenpolymerwithethene; POLY(ETHYLENE-CO-TETRAFLUOROETHYLENE); POLY(ETHYLENE-CO-TETRAFLUOROETHYLENE), M ELT INDEX 11; POLY(ETHYLENE-CO-TETRAFLUOROETHYLENE), M ELT INDEX 6; poly(ethylene-tetrafluoroethyl. CAS No. 25038-71-5. Pack Sizes: 50 g in poly bottle. Product ID: ethene; 1,1,2,2-tetrafluoroethene. Molecular formula: 128.07g/mol. Mole weight: (CH2CH2)x(CF2CF2)y. C=C.F\C(F)=C(\F)F. 1S/C2F4.C2H4/c3-1(4)2(5)6; 1-2/h; 1-2H2. QHSJIZLJUFMIFP-UHFFFAOYSA-N. 96%. | |
| Poly(ethylene-co-tetrafluoroethylene), melt index 11 g/10 min (279°C/49 newton), pellets | coefficient of friction 0.53 Dynamic, p=110 lbs, velocity=0.08-0.35 cm/sec. Uses: Injection molding and extrusion for wire coatings, tubes, films and monofilaments. Group: Polyethylene (pe). CAS No. 25038-71-5. Mole weight: (CH2CH2)x(CF2CF2)y. C=C.F\C(F)=C(\F)F. InChI=1S/C2F4.C2H4/c3-1(4)2(5)6; 1-2/h; 1-2H2. QHSJIZLJUFMIFP-UHFFFAOYSA-N. | |
| Poly(ethylene-co-vinyl acetate) | Poly(ethylene-co-vinyl acetate). Group: Hydrophobic polymerspolymers. CAS No. 24937-78-8. Product ID: ethene; ethenyl acetate. Molecular formula: 114.14g/mol. Mole weight: C6H10O2. CC(=O)OC=C.C=C. InChI=1S/C4H6O2.C2H4/c1-3-6-4(2)5; 1-2/h3H, 1H2, 2H3; 1-2H2. HDERJYVLTPVNRI-UHFFFAOYSA-N. | |
| Poly(ethylene-co-vinylacetate) | PEVAc. CAS No. 24937-78-8. Product ID: 7-00163. Molecular formula: -[(CH2) 2]m[(CH2CH(O2CCH3]n. Purity: 9 wt% vinyl acetate. Categories: Poly(ethylene-co-vinyl acetate). | |
| Polyethylene-co-vinyl acetate 70:30(wt)mw 60,000 | Polyethylene-co-vinyl acetate 70:30(wt)mw 60,000. Uses: Designed for use in research and industrial production. Product Category: Polymer/Macromolecule. CAS No. 24937-78-8. Mole weight: 60000. Product ID: ACM24937788-5. Alfa Chemistry ISO 9001:2015 Certified. | |
| Polyethylene-co-vinyl acetate 70:30(wt)mw 65,000 | Polyethylene-co-vinyl acetate 70:30(wt)mw 65,000. Uses: Designed for use in research and industrial production. Product Category: Polymer/Macromolecule. CAS No. 24937-78-8. Molecular formula: C18H30O6X2. Mole weight: 65000. Density: 0.95~500 ppm BHT. Product ID: ACM24937788-10. Alfa Chemistry ISO 9001:2015 Certified. | |
| Polyethylene-co-vinyl acetate 70:30(wt)mw 75,000 | Polyethylene-co-vinyl acetate 70:30(wt)mw 75,000. Uses: Designed for use in research and industrial production. Product Category: Polymer/Macromolecule. CAS No. 24937-78-8. Mole weight: 75000. Product ID: ACM24937788-2. Alfa Chemistry ISO 9001:2015 Certified. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 12 wt. %, melt index 8 g/10 min (190°C/2.16kg) | Poly(ethylene-co-vinyl acetate), vinyl acetate 12 wt. %, melt index 8 g/10 min (190°C/2.16kg). Group: Polymers. CAS No. 24937-78-8. Product ID: ethene; ethenyl acetate. Molecular formula: 114.14g/mol. Mole weight: C6H10O2. CC(=O)OC=C.C=C. InChI=1S/C4H6O2.C2H4/c1-3-6-4(2)5; 1-2/h3H, 1H2, 2H3; 1-2H2. HDERJYVLTPVNRI-UHFFFAOYSA-N. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 18 wt. %, 8 g/10 min | Poly(ethylene-co-vinyl acetate), vinyl acetate 18 wt. %, 8 g/10 min. Uses: Flexible tubing, color concentrates, gaskets and molded parts for autos, plastic lenses and pumps. Group: Ethylene-vinyl acetate (eva). CAS No. 24937-78-8. Mole weight: (CH2CH2)m[CH2CH(OCOCH3)]n. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 18 wt. %, melt index 8 g/10 min (190°C/2.16kg) | Poly(ethylene-co-vinyl acetate), vinyl acetate 18 wt. %, melt index 8 g/10 min (190°C/2.16kg). Group: Polymers. CAS No. 24937-78-8. Product ID: ethene; ethenyl acetate. Molecular formula: 114.14g/mol. Mole weight: C6H10O2. CC(=O)OC=C.C=C. InChI=1S/C4H6O2.C2H4/c1-3-6-4(2)5; 1-2/h3H, 1H2, 2H3; 1-2H2. HDERJYVLTPVNRI-UHFFFAOYSA-N. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 25 wt. %, 19 g/10 min | Poly(ethylene-co-vinyl acetate), vinyl acetate 25 wt. %, 19 g/10 min. Group: Ethylene-vinyl acetate (eva). CAS No. 24937-78-8. Mole weight: (CH2CH2)m[CH2CH(OCOCH3)]n. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 25 wt. %, melt index 19 g/10 min (190°C/2.16kg) | Poly(ethylene-co-vinyl acetate), vinyl acetate 25 wt. %, melt index 19 g/10 min (190°C/2.16kg). Group: Polymers. CAS No. 24937-78-8. Product ID: ethene; ethenyl acetate. Molecular formula: 114.14g/mol. Mole weight: C6H10O2. CC(=O)OC=C.C=C. InChI=1S/C4H6O2.C2H4/c1-3-6-4(2)5; 1-2/h3H, 1H2, 2H3; 1-2H2. HDERJYVLTPVNRI-UHFFFAOYSA-N. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 32 wt. %, melt index 43 g/10 min (190°C/2.16kg) | Poly(ethylene-co-vinyl acetate), vinyl acetate 32 wt. %, melt index 43 g/10 min (190°C/2.16kg). Group: Polymers. CAS No. 24937-78-8. Product ID: ethene; ethenyl acetate. Molecular formula: 114.14g/mol. Mole weight: C6H10O2. CC(=O)OC=C.C=C. InChI=1S/C4H6O2.C2H4/c1-3-6-4(2)5; 1-2/h3H, 1H2, 2H3; 1-2H2. HDERJYVLTPVNRI-UHFFFAOYSA-N. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 40 wt. %, (41-63 dg/min) | Poly(ethylene-co-vinyl acetate), vinyl acetate 40 wt. %, (41-63 dg/min). Group: Ethylene-vinyl acetate (eva). Alternative Names: PEVA. CAS No. 24937-78-8. Mole weight: (CH2CH2)m[CH2CH(OCOCH3)]n. C=C.CC(=O)OC=C. | |
| Poly(ethylene-co-vinyl acetate), vinyl acetate 40 wt. %, melt index 52 g/10 min (190°C/2.16kg) | Poly(ethylene-co-vinyl acetate), vinyl acetate 40 wt. %, melt index 52 g/10 min (190°C/2.16kg). Group: Polymers. CAS No. 24937-78-8. Product ID: ethene; ethenyl acetate. Molecular formula: 114.14g/mol. Mole weight: C6H10O2. CC(=O)OC=C.C=C. InChI=1S/C4H6O2.C2H4/c1-3-6-4(2)5; 1-2/h3H, 1H2, 2H3; 1-2H2. HDERJYVLTPVNRI-UHFFFAOYSA-N. | |
| Poly(ethylene-d4) | Poly(ethylene-d4). Uses: Designed for use in research and industrial production. Additional or Alternative Names: POLY(ETHYLENE-D4);POLYETHYLENE (ETHYLENE-D4);POLY(ETHYLENE-D4), 98 ATOM % D;Deuterated polyethylene. CAS No. 25549-98-8. Molecular formula: C6D12X2. Mole weight: 96.23. Purity: 98 atom % D. Product ID: ACM25549988. Alfa Chemistry ISO 9001:2015 Certified. Categories: Poly(ethylenedioxy)thiophene. | |
| Polyethylene Dropper Bottle | Polyethylene Dropper Bottle. Product ID: PM-040. Product Keywords: Packaging Materials; Plastic Packaging; PM-040; Polyethylene Dropper Bottle. |  |
| Polyethylene Foam | Polyethylene Foam. Group: other nano materials metal foams. ≥99.9%. | |
| polyethylene FOOD GRADE | polyethylene FOOD GRADE. Group: Polymers. | |
| Polyethylene Furanoate | Polyethylene Furanoate. Group: Polymers. | |
| Poly(ethylene glycol) | PEG. CAS No. 25322-68-3. Product ID: 6-00169. Mole weight: Mw 12,000. Properties: solid. Categories: Polyethylene glycol. | |
| Poly(ethylene glycol) | PEG. CAS No. 25322-68-3. Product ID: 5-02444. Mole weight: Mw 300. Properties: solid. Categories: Polyethylene glycol. | |
| Poly(ethylene glycol) | PEG. CAS No. 25322-68-3. Product ID: 5-02445. Mole weight: Mw 540. Properties: solid. Categories: Polyethylene glycol. | |
Our database is helping our users find suppliers everyday.
