American Chemical Suppliers
A directory of where to buy chemicals in the USA, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices or more information.
Product | Description | |
---|---|---|
Polyacrylamides Quick inquiry Where to buy Suppliers range | Our wide distribution network, with locations coast-to-coast, helps guarantee fast, reliable service to Univar's customers. | |
polyacrylate rubber Quick inquiry Where to buy Suppliers range | polyacrylate rubber. Group: Polymers. | |
Poly(acrylic acid) Quick inquiry Where to buy Suppliers range | Poly(acrylic acid). Group: Polymers. CAS No. 27599-56-0. | |
Poly(acrylic acid) Quick inquiry Where to buy Suppliers range | Poly(acrylic acid). Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Hydrophilic Polymers; Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid), Quick inquiry Where to buy Suppliers range | Poly(acrylic acid). Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Polyacrylic acid Quick inquiry Where to buy Suppliers range | Polyacrylic acid. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. Alternative Names: PAA, PAAc, Acrysol, Acumer, Alcosperse, Aquatreat, Carbomer, Sokalan. CAS No. 9003-1-4. Product ID: PE-0292. | |
Polyacrylic acid Quick inquiry Where to buy Suppliers range | Polyacrylic acid. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Polyacrylic Acid Quick inquiry Where to buy Suppliers range | Polyacrylic Acid. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Glass Additives; Polymers. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid) 50% solution Quick inquiry Where to buy Suppliers range | Poly(acrylic acid) 50% solution. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid-co-acrylamide),potassium salt Quick inquiry Where to buy Suppliers range | Poly(acrylic acid-co-acrylamide),potassium salt. Group: Biomaterials. Alternative Names: 2-Propenoicacid, potassiumsalt, polymerwith2-propenamide;POLY(ACRYLIC ACID-CO-ACRYLAMIDE), POTASSIUM SALT;POLY(ACRYLIC ACID-CO-ACRYLAMIDE), POTASS IUM SALT, CROSS-LINKED;2-Propenoic acid, potassium salt, polymer with 2-propenamide 2-propenoic acid, potassiu. CAS No. 31212-13-2. Molecular formula: C6H8KNO3. | |
Poly(acrylic acid-co-maleic acid),sodium salt Quick inquiry Where to buy Suppliers range | Poly(acrylic acid-co-maleic acid),sodium salt. Group: Heterocyclic Organic Compound. Alternative Names: POLY(ACRYLIC ACID-CO-MALEIC ACID), SODIUM SALT;2-Propenoicacid,2,5-furandionepolymer,sodiumsalt;2-Propenoicacid,polymerwith2,5-furandione,sodiumsalt;SODIUM ACRYLIC ACID/MA COPOLYMER;POLY(ACRYLIC ACID-CO-MALEIC ACID)SODI&;POLY(ACRYLIC ACID-CO-MALEIC ACID), SODIU M SALT, AVERAGE M.W. 50,000;Polycarboxilat8;Acrylic acid-maleic anhydride sodium salt copolymer. CAS No. 52255-49-9. Molecular formula: C21H15Na9O18X2. Mole weight: 762.24. | |
Poly(acrylic acid-co-maleic acid) solution Quick inquiry Where to buy Suppliers range | Poly(acrylic acid-co-maleic acid) solution. Group: Biochemicals. Grades: Highly Purified. CAS No. 29132-58-9. Pack Sizes: 100g, 250g, 500g, 1kg, 2kg. Molecular Formula: C21H24O18X2. US Biological Life Sciences. | Worldwide |
Poly(acrylic acid-co-maleic acid) solution Quick inquiry Where to buy Suppliers range | Poly(acrylic acid-co-maleic acid) solution. Group: Hydrophilic Polymers. CAS No. 29132-58-9. IUPAC Name: (E)-but-2-enedioic acid;prop-2-enoic acid. Molecular Weight: 188.13g/mol. Molecular Formula: C7H8O6. SMILES: C=CC(=O)O.C(=CC(=O)O)C(=O)O. InChI: InChI=1S/C4H4O4.C3H4O2/c5-3(6)1-2-4(7)8;1-2-3(4)5/h1-2H,(H,5,6)(H,7,8);2H,1H2,(H,4,5)/b2-1+. InChIKey: JSYPRLVDJYQMAI-TYYBGVCCSA-N. | |
Poly(acrylic acid)-graft-poly(ethylene oxide) Quick inquiry Where to buy Suppliers range | Poly(acrylic acid)-graft-poly(ethylene oxide). Group: Functional PEGs. Alternative Names: Random Graft Copolymer Poly(ethylene glycol andacrylic acid). Product ID: ACMA00006810. | |
Poly(acrylic acid)-graft-poly(ethylene oxide), grafting on amide/imide linkage Quick inquiry Where to buy Suppliers range | Poly(acrylic acid)-graft-poly(ethylene oxide), grafting on amide/imide linkage. Group: Functional PEGs. Alternative Names: andom Graft Copolymer Poly(ethylene glycol andacrylic acid)-Amide and Imide linkage. Product ID: ACMA00006814. | |
Poly(acrylic acid), M.W ~2,000 Quick inquiry Where to buy Suppliers range | Poly(acrylic acid), M.W ~2,000. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid), M.W ~3,000 Quick inquiry Where to buy Suppliers range | Poly(acrylic acid), M.W ~3,000. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid), M.W ~450,000 Quick inquiry Where to buy Suppliers range | Poly(acrylic acid), M.W ~450,000. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid)partial na salt Quick inquiry Where to buy Suppliers range | Poly(acrylic acid)partial na salt. Group: Biomaterials. Alternative Names: 2-Propenoicacid,polymerwithsodium2-propenoate;POLY(ACRYLIC ACID)PARTIAL NA SALT;POLY(ACRYLIC ACID), 50 WT. % SOLUTION INWATER;POLY(ACRYLIC ACID), 25 WT. % SOLUTION INWATER;POLY(ACRYLIC ACID), 65 WT. % SOLUTION INWATER;poly(acrylic acid) partial sodium sal. CAS No. 9033-79-8. | |
Poly(acrylic acid) partial potassium salt Quick inquiry Where to buy Suppliers range | Poly(acrylic acid) partial potassium salt. Group: Hydrophilic Polymers. CAS No. 25608-12-2. IUPAC Name: potassium;prop-2-enoate. Molecular Weight: 110.15g/mol. Molecular Formula: C3H3KO2. SMILES: C=CC(=O)[O-].[K+]. InChI: InChI=1S/C3H4O2.K/c1-2-3(4)5;/h2H,1H2,(H,4,5);/q;+1/p-1. InChIKey: ZUBIJGNKOJGGCI-UHFFFAOYSA-M. | |
Poly(acrylic acid) partial sodium salt solution Quick inquiry Where to buy Suppliers range | Poly(acrylic acid) partial sodium salt solution. Group: Hydrogels and Crosslinked Polymers; Hydrophilic Polymers. CAS No. 9033-79-8. | |
Poly(acrylic acid), powder, M.W ~2000 Quick inquiry Where to buy Suppliers range | Poly(acrylic acid), powder, M.W ~2000. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid sodium salt) Quick inquiry Where to buy Suppliers range | Water Soluble Polymers. Uses: For analytical and research use. Group: reagents. CAS No. 9003-4-7. | |
POLY(ACRYLIC ACID), SODIUM SALT Quick inquiry Where to buy Suppliers range | White to Off White powder. Group: Hydrophilic Polymers. Alternative Names: opanediyldi-2-propenoateandsodium2-propenoate; poly(acrylicacid)partialsodiumsalt. CAS No. 76774-25-9. IUPAC Name: sodium;2,2-bis(prop-2-enoyloxymethyl)butyl prop-2-enoate;prop-2-enoate;prop-2-enoic acid. Molecular Weight: 462.4g/mol. Molecular Formula: C21H27NaO10. SMILES: CCC (COC (=O)C=C) (COC (=O)C=C)COC (=O)C=C. C=CC (=O)O. C=CC (=O)[O-]. [Na+]. InChI: InChI=1S/C15H20O6.2C3H4O2.Na/c1-5-12(16)19-9-15(8-4,10-20-13(17)6-2)11-21-14(18)7-3;2*1-2-3(4)5;/h5-7H,1-3,8-11H2,4H3;2*2H,1H2,(H,4,5);/q;;;+1/p-1. InChIKey: NZZHEJIHHYZFLN-UHFFFAOYSA-M. | |
Poly(acrylic acid),sodium salt,20% soln. in water[mw ~ 225,000] Quick inquiry Where to buy Suppliers range | Poly(acrylic acid),sodium salt,20% soln. in water[mw ~ 225,000]. Group: Polymer/Macromolecule. CAS No. 9003-4-7. Molecular formula: [-CH2CH(CO2Na)-]n. Mole weight: ~ 225,000. Hazard statements: Irritant. | |
Poly(acrylic acid, sodium salt) solution Quick inquiry Where to buy Suppliers range | Poly(acrylic acid, sodium salt) solution. Uses: Liquid;Liquid;WHITE POWDER WITH CHARACTERISTIC ODOUR. Group: Hydrophilic Polymers; Self-Assembly Materials. CAS No. 9003-4-7. IUPAC Name: sodium;prop-2-enoate. Molecular Weight: 94.04g/mol. Molecular Formula: (C3H3O2)n??Na;C3H3NaO2. SMILES: C=CC(=O)[O-].[Na+]. InChI: InChI=1S/C3H4O2.Na/c1-2-3(4)5;/h2H,1H2,(H,4,5);/q;+1/p-1. InChIKey: NNMHYFLPFNGQFZ-UHFFFAOYSA-M. Melting Point: >300 ?. Density: 1.1 - 1.4 g/cm³. Solubility: Solubility in water: good. | |
Poly(acrylic acid) solution Quick inquiry Where to buy Suppliers range | Poly(acrylic acid) solution. Uses: Acrylic acid is a colorless liquid with a distinctive acrid odor. Flash point 130°F. Boiling point 286°F. Freezing point 53°F. Corrosive to metals and tissue. Prolonged exposure to fire or heat can cause polymerization. If polymerization takes place in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.;Acrylic acid, [waste] appears as a colorless liquid with a distinctive acrid odor. Combustible. Flash point 130°F. Boiling point 286°F. Freezing point 121°F. Corrosive to metals and tissue. May polymerize under prolonged exposure to fire or heat. If polymerization occurs in a container violent rupture may occur. Generally shipped with an inhibitor such as hydroquinone to prevent polymerization.; Liquid; Liquid; COLOURLESS LIQUID WITH PUNGENT ODOUR.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor.;Colorless liquid or solid (below 55°F) with a distinctive, acrid odor. [Note: Shipped with an inhibitor (e.g., hydroquinone) since it readily polymerizes.]. Group: Hydrophilic Polymers. CAS No. 9003-1-4. IUPAC Name: prop-2-enoic acid. Molecular Weight: 72.06g/mol. Molecular Formula: C3H4O2;CH2=CHCOOH;C3H4O2. SMILES: C=CC(=O)O. InChI: InChI=1S/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5). InChIKey: NIXOWILDQLNWCW-UHFFFAOYSA-N. Boiling Point: 286 °F at 760 mm Hg (NTP, 1992);286 °F at 760 mm Hg (NIOSH, 2016);141.2 ?;142 ?;141 ?;286°F;286°F. Melting Point: 55 °F (NTP, 1992);55 °F (NIOSH, 2016);13.5 ?;13.56 ?;13?;14 ?;55°F;55°F. Flash Point: 130 °F (NTP, 1992);121 °F (NIOSH, 2016);54 ? (open cup);122 °F (50 ?) (open cup);48-55 ? c.c.;121°F;121°F. Density: 1.0497 at 68 °F (USCG, 1999);1.05 (NIOSH, 2016);1.0511 g/cu cm at 20 ?;1.54 g/mL at 25 ?/4 ?;Relative density (water = 1): 1.05;1.05;1.05. Solubility: greater than or equal to 100 mg/mL at 63° F (NTP, 1992);Miscible (NIOSH, 2016);13.88 M;Miscible with alcohol, and ether;Miscible with ethanol, ethyl ether; soluble in acetone, benzene, carbon tetrachloride;Miscible with chloroform;Miscible with water /1X10+6 mg/L/ at 25 ?;Soluble in methanol, ethanol, dioxane, dimethylformamide, 2-propanol, formamide, ethylene glycol, and acetic acid;Soluble in water;1000 mg/mL;Solubility in water: miscible;Miscible. | |
Poly(acrylic acid) solution Quick inquiry Where to buy Suppliers range | Poly(acrylic acid) solution. Group: Biochemicals. Alternative Names: Carbomer 940. Grades: Molecular Biology Grade. CAS No. 9003-1-4. Pack Sizes: 100g, 250g, 500g. US Biological Life Sciences. | Worldwide |
Polyacrylic Resin ? Quick inquiry Where to buy Suppliers range | Polyacrylic Resin ?. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. Alternative Names: Methacrylic Acid Copolymer (USP); Methacrylic Acid - Ethyl Acrylate Copolymer (1:1)(BP); Acidi methacrylici et ethylis acrylatis polymerisatum 1:1(PhEur). Grades: Pharmceutical Excipients. CAS No. 25212-88-8. Product ID: PE-0463. | |
Polyacrylic Resin ? Quick inquiry Where to buy Suppliers range | Polyacrylic Resin ?. Uses: Used for research and manufacturing. Group: Pharmaceutical Excipients. Grades: Pharmceutical Excipients. CAS No. 24938-16-7. Product ID: PE-0464. | |
Polyacrylonitrile Quick inquiry Where to buy Suppliers range | Hydrophobic Polymers. Uses: For analytical and research use. Group: reagents. CAS No. 25014-41-9. Pack Sizes: 50G, 100G. | |
Polyacrylonitrile (200,000) Quick inquiry Where to buy Suppliers range | Polyacrylonitrile (200,000) | Sarchem Laboratories New Jersey NJ |
Polyacrylonitrile (50,000) Quick inquiry Where to buy Suppliers range | Polyacrylonitrile (50,000). CAS No: 25014-41-9 | Sarchem Laboratories New Jersey NJ |
Polyacrylonitrile (70,000) Quick inquiry Where to buy Suppliers range | Polyacrylonitrile (70,000) | Sarchem Laboratories New Jersey NJ |
Polyacrylonitrile, average Mw 150,000 Quick inquiry Where to buy Suppliers range | Polyacrylonitrile, average Mw 150,000. Uses: Acrylonitrile, stabilized appears as a clear colorless liquid with a strong pungent odor. Flash point 32°F. Prolonged exposure to the vapors or skin contact harmful. Density 6.7 lb / gal. Vapors heavier than air. Combustion produces toxic oxides of nitrogen. Requires storage and handling in closed systems. Used in insecticides and to make plastics, fibers and other chemicals. Rate of onset: Immediate Persistence: Minutes to hours Odor threshold: 17 ppm Source/use/other hazard: Plastics, coatings, adhesives industries; dyes; pharmaceuticals; flam gas.;Liquid;COLOURLESS OR PALE YELLOW LIQUID WITH PUNGENT ODOUR.;Colorless to pale-yellow liquid with an unpleasant odor.;Colorless to pale-yellow liquid with an unpleasant odor. [Note: Odor can only be detected above the PEL.]. Group: Polymers. CAS No. 25014-41-9. IUPAC Name: prop-2-enenitrile. Molecular Weight: 53.06g/mol. Molecular Formula: C3H3N;CH2=CH-CN;H2C(CH)CN;C3H3N. SMILES: C=CC#N. InChI: InChI=1S/C3H3N/c1-2-3-4/h2H,1H2. InChIKey: NLHHRLWOUZZQLW-UHFFFAOYSA-N. Boiling Point: 171 °F at 760 mm Hg (EPA, 1998);77.3 ?;77.2 ?;77 ?;171°F;171°F. Melting Point: -116 °F (EPA, 1998);-83.5 ?;-83.51 ?;-84 ?;-116°F;-116°F. Flash Point: 32 °F (EPA, 1998);-5 ? (23 °F) - closed cup;32 °F(0 ?)(open cup);-1 ? c.c.;30°F;30°F. Density: 0.8004 at 77 °F (EPA, 1998);0.8007 at 25 ?;1.14-1.17;Relative density (water = 1): 0.8;0.81;0.81. Solubility: 10 to 50 mg/mL at 70.9° F (NTP, 1992);1.40 M;In water, 7.45X10+4 mg/L at 25 ?;Very soluble in ethanol, acetone, benzene, ether;Acrylonitrile is. miscible with ethanol, carbon tetrachloride, ethyl acetate, ethylene cyanohydrin, liquid carbon dioxide. toluene, petroleum ether, and xylene.;SOL IN DIMETHYLSULFOXIDE, DIMETHYLACETAMIDE, DIMETHYLFORMAMIDE;SOL IN MALEIC ANHYDRIDE, NITRILES, NITROPHENOLS, ETHYLENE CARBONATE, HOT BUTYROLACTONE; INSOL IN ALC, ACETONE, BENZENE, CARBON TETRACHLORIDE, PETROLEUM ETHER;Solubility in water, g/100ml at 20 ?: 7;7%. Viscosity: 0.34 sq mm/s at 25 ?. | |
Polyacrylonitrile, average Mw 85,000 Quick inquiry Where to buy Suppliers range | Polyacrylonitrile, average Mw 85,000. Uses: Acrylonitrile, stabilized appears as a clear colorless liquid with a strong pungent odor. Flash point 32°F. Prolonged exposure to the vapors or skin contact harmful. Density 6.7 lb / gal. Vapors heavier than air. Combustion produces toxic oxides of nitrogen. Requires storage and handling in closed systems. Used in insecticides and to make plastics, fibers and other chemicals. Rate of onset: Immediate Persistence: Minutes to hours Odor threshold: 17 ppm Source/use/other hazard: Plastics, coatings, adhesives industries; dyes; pharmaceuticals; flam gas.;Liquid;COLOURLESS OR PALE YELLOW LIQUID WITH PUNGENT ODOUR.;Colorless to pale-yellow liquid with an unpleasant odor.;Colorless to pale-yellow liquid with an unpleasant odor. [Note: Odor can only be detected above the PEL.]. Group: Polymers. CAS No. 25014-41-9. IUPAC Name: prop-2-enenitrile. Molecular Weight: 53.06g/mol. Molecular Formula: C3H3N;CH2=CH-CN;H2C(CH)CN;C3H3N. SMILES: C=CC#N. InChI: InChI=1S/C3H3N/c1-2-3-4/h2H,1H2. InChIKey: NLHHRLWOUZZQLW-UHFFFAOYSA-N. Boiling Point: 171 °F at 760 mm Hg (EPA, 1998);77.3 ?;77.2 ?;77 ?;171°F;171°F. Melting Point: -116 °F (EPA, 1998);-83.5 ?;-83.51 ?;-84 ?;-116°F;-116°F. Flash Point: 32 °F (EPA, 1998);-5 ? (23 °F) - closed cup;32 °F(0 ?)(open cup);-1 ? c.c.;30°F;30°F. Density: 0.8004 at 77 °F (EPA, 1998);0.8007 at 25 ?;1.14-1.17;Relative density (water = 1): 0.8;0.81;0.81. Solubility: 10 to 50 mg/mL at 70.9° F (NTP, 1992);1.40 M;In water, 7.45X10+4 mg/L at 25 ?;Very soluble in ethanol, acetone, benzene, ether;Acrylonitrile is. miscible with ethanol, carbon tetrachloride, ethyl acetate, ethylene cyanohydrin, liquid carbon dioxide. toluene, petroleum ether, and xylene.;SOL IN DIMETHYLSULFOXIDE, DIMETHYLACETAMIDE, DIMETHYLFORMAMIDE;SOL IN MALEIC ANHYDRIDE, NITRILES, NITROPHENOLS, ETHYLENE CARBONATE, HOT BUTYROLACTONE; INSOL IN ALC, ACETONE, BENZENE, CARBON TETRACHLORIDE, PETROLEUM ETHER;Solubility in water, g/100ml at 20 ?: 7;7%. Viscosity: 0.34 sq mm/s at 25 ?. | |
Poly(acrylonitrile-co-butadiene) Quick inquiry Where to buy Suppliers range | Poly(acrylonitrile-co-butadiene). Uses: DryPowder. Group: 3D Printing Materials; Hydrophobic Polymers. CAS No. 9003-18-3. IUPAC Name: buta-1,3-diene;prop-2-enenitrile. Molecular Weight: 107.15g/mol. Molecular Formula: C7H9N. SMILES: C=CC=C.C=CC#N. InChI: InChI=1S/C4H6.C3H3N/c1-3-4-2;1-2-3-4/h3-4H,1-2H2;2H,1H2. InChIKey: NTXGQCSETZTARF-UHFFFAOYSA-N. | |
Poly(acrylonitrile-co-butadiene), dicarboxy terminated Quick inquiry Where to buy Suppliers range | Poly(acrylonitrile-co-butadiene), dicarboxy terminated. Uses: DryPowder. Group: Hydrophobic Polymers. CAS No. 68891-46-3. IUPAC Name: buta-1,3-diene;prop-2-enenitrile. Molecular Weight: 107.15g/mol. Molecular Formula: C7H9N. SMILES: C=CC=C.C=CC#N. InChI: InChI=1S/C4H6.C3H3N/c1-3-4-2;1-2-3-4/h3-4H,1-2H2;2H,1H2. InChIKey: NTXGQCSETZTARF-UHFFFAOYSA-N. | |
Poly(acrylonitrile-co-methyl acrylate) Quick inquiry Where to buy Suppliers range | Poly(acrylonitrile-co-methyl acrylate). Group: Hydrophobic Polymers; Polymers. CAS No. 24968-79-4. | |
Poly(acrylonitrile-co-vinylidene chloride-co-methyl methacrylate) Quick inquiry Where to buy Suppliers range | granular. Group: Heterocyclic Organic Compound. Alternative Names: 2-propenoicacid, 2-methyl-, methylester, polymerwith1, 1-dichloroetheneand; 2-Propenoicacid, 2-methyl-, methylester, polymerwith1, 1-dichloroetheneand2-propenenitrile; poly(acrylonitrile-co-vinylidenechloride-co-meth; Vinylidenechloride, methylmethacrylate, acrylonitrilepolymer; POLY(ACRYLONITRILE-CO-VINYLIDENE CHLORIDE-CO-METHYL METHACRYLATE);POLY(VINYLIDENE CHLORIDE-CO-ACRYLONITRILE-CO-METHYL METHACRYLATE);POLY(ACRYLONITRILE-CO-VINYLIDENE CHLORID E-CO-METHYL METHACRYLATE), EXPAND SPHERE;POLY(VINYLIDENE CHLORIDE-CO-ACRYLO-&. CAS No. 25214-39-5. Molecular formula: (C5H8O2·C3H3N·C2H2Cl2)x. Mole weight: 0. Density: 1.6g/mL at 25°C(lit.). | |
Polyacrylonitrile,mw 150000 Quick inquiry Where to buy Suppliers range | Polyacrylonitrile,mw 150000. Group: Polymer/Macromolecule. CAS No. 25014-41-9. Mole weight: 150000. Melting Point: 317°C. Density: 1.184. | |
Polyacrylonitrile,mw 200000(pan 200000) Quick inquiry Where to buy Suppliers range | odorless powder. Alternative Names: POLYACRYLONITRILE; 2-Propenenitrile, homopolymer; acl1050; acrylonitrile, polymers; acrylonitrilehomopolymer; acrylonitrilepolymer; biospal1200s; biospal1800s. CAS No. 25014-41-9. IUPAC Name: prop-2-enenitrile. Molecular Weight: 150000. Molecular Formula: (C3H3N)x. SMILES: C=CC#N. | |
Polyadenosinic acid potassium salt Quick inquiry Where to buy Suppliers range | Commonly used for DNA/RNA extraction. Synonyms: Poly A potassium salt; Poly Ra Potassium Salt; Poly-Adenylic Acid potassium salt; Polyadenylic Acid 5' Potassium Salt; Poly A-K. Grades: ≥85%. CAS No. 26763-19-9. Molecular formula: (C10H11O6N5PK)n. Mole weight: (367.30)n. | |
Polyadenosinic acid sodium salt Quick inquiry Where to buy Suppliers range | Commonly used for DNA/RNA extraction. Synonyms: Poly A sodium salt; Poly Ra sodium salt; Poly-Adenylic Acid sodium salt; Polyadenylic Acid 5' sodium salt; Poly(A) sodium salt. Grades: ≥85%. Molecular formula: (C10H11O6N5PNa)n. Mole weight: (351.19)n. | |
Polyadenylic acid Quick inquiry Where to buy Suppliers range | Polyadenylic acid. Group: Heterocyclic Organic Compound. Alternative Names: polyadenylic acid potassium salt mr ~7000000;PolyadenylicAcid, M.W.>100, 000. CAS No. 24937-83-5. Product ID: ACM24937835. | |
POLYADENYLIC ACID (5') POTASSIUM SALT Quick inquiry Where to buy Suppliers range | POLYADENYLIC ACID (5') POTASSIUM SALT. Group: Heterocyclic Organic Compound. CAS No. 26763-19-9. Product ID: ACM26763199. Molecular formula: C10H13KN5O7P. Mole weight: 385.31g/mol. IUPAC Name: potassium;[(2R,3S,4R,5R)-5-(6-aminopurin-9-yl)-3,4-dihydroxyoxolan-2-yl]methyl hydrogen phosphate. | |
Polyadenylic acid-polyuridylic acid sodium salt Quick inquiry Where to buy Suppliers range | Polyadenylic acid-polyuridylic acid sodium salt. Group: Oligonucleotide Polymers and Copolymers. CAS No. 24936-38-7. IUPAC Name: [(2R,3S,4R,5R)-5-(6-aminopurin-9-yl)-3,4-dihydroxyoxolan-2-yl]methyl dihydrogen phosphate;[(2R,3S,4R,5R)-5-(2,4-dioxopyrimidin-1-yl)-3,4-dihydroxyoxolan-2-yl]methyl dihydrogen phosphate. Molecular Weight: 671.4g/mol. Molecular Formula: C19H27N7O16P2. SMILES: C1=CN (C (=O)NC1=O)C2C (C (C (O2)COP (=O) (O)O)O)O. C1=NC (=C2C (=N1)N (C=N2)C3C (C (C (O3)COP (=O) (O)O)O)O)N. InChI: InChI=1S/C10H14N5O7P.C9H13N2O9P/c11-8-5-9(13-2-12-8)15(3-14-5)10-7(17)6(16)4(22-10)1-21-23(18,19)20;12-5-1-2-11(9(15)10-5)8-7(14)6(13)4(20-8)3-19-21(16,17)18/h2-4,6-7,10,16-17H,1H2,(H2,11,12,13)(H2,18,19,20);1-2,4,6-8,13-14H,3H2,(H,10,12,15)(H2,16,17,18)/t4-,6-,7-,10-;4-,6-,7-,8-/m11/s1. InChIKey: VGQHQOKIMNKUEF-ZLOOHWKQSA-N. | |
Polyadenylic acid-Polyuridylic acid sodium salt Quick inquiry Where to buy Suppliers range | Cas No. 24936-38-7. | |
poly(ala Quick inquiry Where to buy Suppliers range | poly(ala. Group: Polyamino Acids. CAS No. 28704-27-0. IUPAC Name: (2S)-2-amino-3-(4-hydroxyphenyl)propanoic acid;(2S)-2-aminopentanedioic acid;(2S)-2-aminopropanoic acid;(2S)-2,6-diaminohexanoic acid. Molecular Weight: 563.6g/mol. Molecular Formula: C23H41N5O11. SMILES: CC(C(=O)O)N. C1=CC(=CC=C1CC(C(=O)O)N)O. C(CCN)CC(C(=O)O)N. C(CC(=O)O)C(C(=O)O)N. InChI: InChI=1S/C9H11NO3. C6H14N2O2. C5H9NO4. C3H7NO2/c10-8(9(12)13)5-6-1-3-7(11)4-2-6; 7-4-2-1-3-5(8)6(9)10; 6-3(5(9)10)1-2-4(7)8; 1-2(4)3(5)6/h1-4, 8, 11H, 5, 10H2, (H, 12, 13); 5H, 1-4, 7-8H2, (H, 9, 10); 3H, 1-2, 6H2, (H, 7, 8)(H, 9, 10); 2H, 4H2, 1H3, (H, 5, 6)/t8-; 5-; 3-; 2-/m0000/s1. InChIKey: YLOCGHYTXIINAI-XKUOMLDTSA-N. | |
Polyalkyleneoxide modified heptamethyltrisiloxane Quick inquiry Where to buy Suppliers range | Polyalkyleneoxide modified heptamethyltrisiloxane. CAS No: 27306-78-1 | Sarchem Laboratories New Jersey NJ |
Polyalkyleneoxide Modified Heptamethyltrisiloxane Quick inquiry Where to buy Suppliers range | Polyalkyleneoxide Modified Heptamethyltrisiloxane. Group: Polymers. | |
poly(allylamine) Quick inquiry Where to buy Suppliers range | poly(allylamine). Uses: Allylamine appears as a colorless to light yellow colored liquid with a strong ammonia-like odor. Less dense than water. Vapors are heavier than air. Toxic by inhalation, ingestion and skin absorption. Irritates skin, eyes and mucous membranes. Flash point below 0°F. Boiling point 130°F. Used to make pharmaceuticals and other chemicals.;Liquid;COLOURLESS-TO-YELLOW LIQUID WITH PUNGENT ODOUR. Group: Polymers. CAS No. 30551-89-4. IUPAC Name: prop-2-en-1-amine. Molecular Weight: 57.09g/mol. Molecular Formula: C3H7N;CH2CHCH2NH2;C3H7N. SMILES: C=CCN. InChI: InChI=1S/C3H7N/c1-2-3-4/h2H,1,3-4H2. InChIKey: VVJKKWFAADXIJK-UHFFFAOYSA-N. Boiling Point: 131 to 136 °F at 760 mm Hg (EPA, 1998);53.3 ?;53.5 ?;52-53 ?. Melting Point: -126 °F (NTP, 1992);-88.2 ?;-88.2 ?;-88 ?. Flash Point: -20 °F (EPA, 1998);-29 ? (-20 °F) - closed cup;10 °F (-12 ?) - closed cup;-29 ? c.c. Density: 0.76 at 68 °F (EPA, 1998);0.760 at 20 ?/20 ?;Relative density (water = 1): 0.8. Solubility: Very soluble (NTP, 1992);17.51 M;In water, 1X10+6 mg/L at 20 ? /miscible/;Miscible with water;Miscible with alcohol, chloroform, ether;Solubility in water: miscible. Viscosity: 0.3745 Poise. | |
Poly(allylamine hydrochloride) Quick inquiry Where to buy Suppliers range | Poly(allylamine hydrochloride). Group: Hydrophilic Polymers; Self-Assembly Materials; Polymers. CAS No. 71550-12-4. IUPAC Name: prop-2-en-1-amine;hydrochloride. Molecular Weight: 93.55g/mol. Molecular Formula: C3H8ClN. SMILES: C=CCN.Cl. InChI: InChI=1S/C3H7N.ClH/c1-2-3-4;/h2H,1,3-4H2;1H. InChIKey: MLGWTHRHHANFCC-UHFFFAOYSA-N. | |
Poly(allylamine hydrochloride), 98% average Mw ~15000 Quick inquiry Where to buy Suppliers range | Poly(allylamine hydrochloride), 98% average Mw ~15000. Group: Polymers. CAS No. 71550-12-4. IUPAC Name: prop-2-en-1-amine;hydrochloride. Molecular Weight: 93.55g/mol. Molecular Formula: C3H8ClN. SMILES: C=CCN.Cl. InChI: InChI=1S/C3H7N.ClH/c1-2-3-4;/h2H,1,3-4H2;1H. InChIKey: MLGWTHRHHANFCC-UHFFFAOYSA-N. | |
Poly(allylamine hydrochloride),mw 150000,40% aq. soln. Quick inquiry Where to buy Suppliers range | Poly(allylamine hydrochloride),mw 150000,40% aq. soln. Group: Polymer/Macromolecule. Alternative Names: 2-Propen-1-amine, hydrochloride, homopolymer;Allylamine, hydrochloride, homopolymer;POLYALLYLAMINE H;POLY(ALLYLAMINE HYDROCHLORIDE);POLYALLYLAMINE HYDROCHLORIDE 03P;POLYALLYLAMINE HYDROCHLORIDE 10S;POLYALLYLAMINE HYDROCHLORIDE 3S;POLYALLYLAMINE HYDROCHLORIDE. CAS No. 71550-12-4. Molecular formula: C3H8ClN. Mole weight: 150,000 (rheological methods). Hazard statements: Unknown. | |
Poly(allylamine),mw 15000,15% aq. soln. Quick inquiry Where to buy Suppliers range | Poly(allylamine),mw 15000,15% aq. soln. Group: Polymer/Macromolecule. Alternative Names: POLY(ALLYLAMINE);POLYALLYLAMINE 05L;2-Propen-1-amine,homopolymer;Poly(allylamine) solution;POLY(ALLYLAMINE), 20 WT. % SOLUTION IN W ATER, AVERAGE MW CA. 65,000;POLY(ALLYLAMINE), 20 WT. % SOLUTION IN W ATER, AVERAGE MW CA. 17,000;2-Propenamine homopolymer. CAS No. 30551-89-4. Molecular formula: [CH2CH(CH2NH2)]n free base. Mole weight: 15,000. Hazard statements: Corrosive. | |
Poly(allylamine) solution Quick inquiry Where to buy Suppliers range | Poly(allylamine) solution. Uses: Allylamine appears as a colorless to light yellow colored liquid with a strong ammonia-like odor. Less dense than water. Vapors are heavier than air. Toxic by inhalation, ingestion and skin absorption. Irritates skin, eyes and mucous membranes. Flash point below 0°F. Boiling point 130°F. Used to make pharmaceuticals and other chemicals.;Liquid;COLOURLESS-TO-YELLOW LIQUID WITH PUNGENT ODOUR. Group: Hydrophilic Polymers. CAS No. 30551-89-4. IUPAC Name: prop-2-en-1-amine. Molecular Weight: 57.09g/mol. Molecular Formula: C3H7N;CH2CHCH2NH2;C3H7N. SMILES: C=CCN. InChI: InChI=1S/C3H7N/c1-2-3-4/h2H,1,3-4H2. InChIKey: VVJKKWFAADXIJK-UHFFFAOYSA-N. Boiling Point: 131 to 136 °F at 760 mm Hg (EPA, 1998);53.3 ?;53.5 ?;52-53 ?. Melting Point: -126 °F (NTP, 1992);-88.2 ?;-88.2 ?;-88 ?. Flash Point: -20 °F (EPA, 1998);-29 ? (-20 °F) - closed cup;10 °F (-12 ?) - closed cup;-29 ? c.c. Density: 0.76 at 68 °F (EPA, 1998);0.760 at 20 ?/20 ?;Relative density (water = 1): 0.8. Solubility: Very soluble (NTP, 1992);17.51 M;In water, 1X10+6 mg/L at 20 ? /miscible/;Miscible with water;Miscible with alcohol, chloroform, ether;Solubility in water: miscible. Viscosity: 0.3745 Poise. | |
Poly(allyl glycidyl ether)-b-poly(ethylene oxide)-b-poly(allyl glycidyl ether) Quick inquiry Where to buy Suppliers range | Poly(allyl glycidyl ether)-b-poly(ethylene oxide)-b-poly(allyl glycidyl ether). Group: Functional PEGs. Alternative Names: Poly (Allyl Glycidyl ether-b-ethylene oxide-b-Ally Glycidyl ether). Product ID: ACMA00006828. | |
Poly-(α,β)-dl-aspartic acid sodium salt Quick inquiry Where to buy Suppliers range | Transparent yellow liquid. Group: Polyamino Acids. Alternative Names: SODIUM POLY-D,L-ASPARTATE; POLY-(ALPHA,BETA)-DL-ASPARTIC ACID SODIUM SALT; POLY-(A,B)-DL-ASPARTIC ACID SODIUM SALT. CAS No. 94525-01-6. IUPAC Name: disodium;(2S)-2-aminobutanedioate. Molecular Weight: 2,000-11,000. Molecular Formula: [-NHCH(CO2R)CH2CO-]n,R=HorNa. SMILES: C(C(C(=O)[O-])N)C(=O)[O-].[Na+].[Na+]. InChIKey: XMXOIHIZTOVVFB-JIZZDEOASA-L. Purity: 96%. | |
Poly(Alpha-Methylstyrene) Quick inquiry Where to buy Suppliers range | Poly(Alpha-Methylstyrene). Uses: Isopropenylbenzene appears as a colorless liquid. Insoluble in water and less dense than water. Flash point 115°F. May be mildly toxic by ingestion, inhalation and skin absorption. Vapors may be narcotic by inhalation. Used as a solvent and to make other chemicals.;Liquid;COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR.;Colorless liquid with a characteristic odor.;Colorless liquid with a characteristic odor. Group: Polymers. IUPAC Name: prop-1-en-2-ylbenzene. Molecular Weight: 118.18g/mol. Molecular Formula: C9H10;C6H5C(CH3)=CH2;C9H10. SMILES: CC(=C)C1=CC=CC=C1. InChI: InChI=1S/C9H10/c1-8(2)9-6-4-3-5-7-9/h3-7H,1H2,2H3. InChIKey: XYLMUPLGERFSHI-UHFFFAOYSA-N. Boiling Point: 329.7 °F at 760 mm Hg (NTP, 1992);165.4 ?;165.4 ?;164 ?;330°F;330°F. Melting Point: -9 °F (NTP, 1992);-23.2 ?;-23.2 ?;-23 ?;-10°F;-10°F. Flash Point: 129 °F (NTP, 1992);83.89 ? (CLOSED CUP);57.8 ? (Cleveland open-cup);54 ?;129°F;129°F. Density: 0.91 at 68 °F (USCG, 1999);0.9106;Relative density (water = 1): 0.91;0.91;0.91. Solubility: less than 1 mg/mL at 72° F (NTP, 1992);9.82e-04 M;SOL IN ALC; SOL IN ALL PROPORTIONS IN ACETONE, CARBON TETRACHLORIDE;Sol in benzene, chloroform;Sol in ether;Sol in n-heptane, ethanol;In water, 116 mg/l @ 25 ?;Solubility in water, g/100ml at 20 ?: 0.012 (very poor);Insoluble. Viscosity: 0.940 cP @ 20 ?. | |
POLY(α-METHYLSTYRENE) Quick inquiry Where to buy Suppliers range | POLY(α-METHYLSTYRENE). Uses: Isopropenylbenzene appears as a colorless liquid. Insoluble in water and less dense than water. Flash point 115°F. May be mildly toxic by ingestion, inhalation and skin absorption. Vapors may be narcotic by inhalation. Used as a solvent and to make other chemicals.;Liquid;COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR.;Colorless liquid with a characteristic odor.;Colorless liquid with a characteristic odor. Group: Polymers. CAS No. 25014-31-7. IUPAC Name: prop-1-en-2-ylbenzene. Molecular Weight: 118.18g/mol. Molecular Formula: C9H10;C6H5C(CH3)=CH2;C9H10. SMILES: CC(=C)C1=CC=CC=C1. InChI: InChI=1S/C9H10/c1-8(2)9-6-4-3-5-7-9/h3-7H,1H2,2H3. InChIKey: XYLMUPLGERFSHI-UHFFFAOYSA-N. Boiling Point: 329.7 °F at 760 mm Hg (NTP, 1992);165.4 ?;165.4 ?;164 ?;330°F;330°F. Melting Point: -9 °F (NTP, 1992);-23.2 ?;-23.2 ?;-23 ?;-10°F;-10°F. Flash Point: 129 °F (NTP, 1992);83.89 ? (CLOSED CUP);57.8 ? (Cleveland open-cup);54 ?;129°F;129°F. Density: 0.91 at 68 °F (USCG, 1999);0.9106;Relative density (water = 1): 0.91;0.91;0.91. Solubility: less than 1 mg/mL at 72° F (NTP, 1992);9.82e-04 M;SOL IN ALC; SOL IN ALL PROPORTIONS IN ACETONE, CARBON TETRACHLORIDE;Sol in benzene, chloroform;Sol in ether;Sol in n-heptane, ethanol;In water, 116 mg/l @ 25 ?;Solubility in water, g/100ml at 20 ?: 0.012 (very poor);Insoluble. Viscosity: 0.940 cP @ 20 ?. | |
Polyalthic acid Quick inquiry Where to buy Suppliers range | Polyalthic acid is a naturally occurring diterpene found in copaiba oil and is reported to have anti-tumor activity. CAS No. 1235-76-3. Molecular formula: C20H28O3. Mole weight: 316.43. | |
Polyaluminium chloride Quick inquiry Where to buy Suppliers range | Polyaluminium chloride. Group: Polymers. CAS No. 1327-41-9. | |
Polyaluminium Chloride Quick inquiry Where to buy Suppliers range | Polyaluminium Chloride. Group: Biochemicals. Grades: Highly Purified. CAS No. 1327-41-9,101707-17-9,11097-68-0,114442-10-3. Pack Sizes: 25g, 50g, 100g, 250g, 500g. Molecular Formula: Al2Cl(OH)5. US Biological Life Sciences. | Worldwide |
Poly Aluminium Chloride Quick inquiry Where to buy Suppliers range | Poly Aluminium Chloride. Group: Polymers. CAS No. 1327-41-9. | |
Polyaluminum chloride hydroxide sulfate Quick inquiry Where to buy Suppliers range | Polyaluminum chloride hydroxide sulfate. Group: Heterocyclic Organic Compound. Alternative Names: POLYALUMINUM CHLORIDE HYDROXIDE SULFATE;POLYALUMINUM HYDROXYCHLOROSULFATE;Aluminum chloride hydroxide sulfate;Polyaluminum chloride hysroxise sulfate;Aluminium chloride hydroxide sulfate. Grades: 96%. CAS No. 39290-78-3. Molecular formula: Al2Cl2H2O6S. Mole weight: 254.95. IUPAC Name: aluminum;chloride;hydroxide;sulfate. Exact Mass: 255.87400. InChIKey: QZLCBMPUYDLCRT-UHFFFAOYSA-J. H-Bond Donor: 1. H-Bond Acceptor: 6. | |
Polyamide Quick inquiry Where to buy Suppliers range | Polyamide. Group: Biochemicals. Grades: Highly Purified. CAS No. 63428-84-2. Pack Sizes: 100g, 250g, 500g, 1kg. US Biological Life Sciences. | Worldwide |
Polyamide Quick inquiry Where to buy Suppliers range | Polyamide. Group: Polymers. | |
Polyamide 11 Granules Quick inquiry Where to buy Suppliers range | Polyamide 11 Granules. Grades: 99.9%. CAS No. 25035-04-5. Product ID: ACM25035045-2. Mole weight: 549.87g/mol. Boiling Point: 344.87 °C. Melting Point: 178-180 °C. Solubility: Insoluble in water. Density: 1.026 g/cm³. | |
Polyamide 3 Quick inquiry Where to buy Suppliers range | Partially vegetable-derived rheology modifier for formulation with low to high polarity organic liquids. High bio-renewable content. Sustainable product, only partially petroleum derived. Uses: Creams, lotions, sticks, sunscreen, color cosmetics, ethanol gels and sprays. Group: Sensory Modifiers. CAS No. 1093268-29-1. Product ID: ACM1093268291. Appearance: Clear yellowish pellets. |