A directory of where to buy chemicals in the USA, including: distributors, industrial manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices or more information.
| Product | Description | |
|---|---|---|
| Polyoxyethylene bis(amine), M.W 1000 | Polyoxyethylene bis(amine), M.W 1000. Group: Polymers. CAS No. 24991-53-5. |  |
| Polyoxyethylene bis(amine), M.W 2000 | Polyoxyethylene bis(amine), M.W 2000. Group: Polymers. CAS No. 24991-53-5. | |
| Polyoxyethylene bis(amine), M.W 4000 | Polyoxyethylene bis(amine), M.W 4000. Group: Polymers. CAS No. 24991-53-5. | |
| Polyoxyethylene bis(azide) | Polyoxyethylene bis(azide). Group: Poly(ethylene glycol) and poly(ethylene oxide). CAS No. 82055-94-5. | |
| Polyoxyethylene Castor Oil Derivatives | Polyoxyl 35 castor oil occurs as a pale yellow, oily liquid that is clear at temperatures above 26°C. It has a faint but characteristic odor and can be completely liquefied by heating to 26°C. Polyoxyl 40 hydrogenated castor oil occurs as a white to yellowish, semisolid paste at 20°Cthat liquefies at 30°C. It has a very faint characteristic odor and is almost tasteless in aqueous solution. Polyoxyl 60 hydrogenated castor oil occurs as a white paste at room temperature. It has little taste or odor in aqueous solution. Synonyms: Acconon; Arlatone; Cremophor; Etocas; Eumulgin; Jeechem; Lipocol; macrogolglyceroli hydroxystearas; macrogolglyceroli ricinoleas; Mapeg; Marlowet; Nikkol; Protachem; Simulsol. CAS No. 61791-12-6. Product ID: PE-0551. Category: Emulsifier; Solubilizer; Humectants. Product Keywords: Solubilizer Excipients; Emulsifier Excipients; PE-0551; Polyoxyethylene Castor Oil Derivatives; Emulsifier; Solubilizer; Humectants; ; 61791-12-6. UNII: 6D4M1DAL6O. Chemical Name: Polyethoxylated castor oil. Grade: Pharmceutical Excipients. Administration route: Intramuscular; Intravenous; Intravesical; Ophthalmic; Oral; Topical. Dosage Form: Injection, emulsion, Soultion, drops, capsule, suspension, tablet, cream. Stability and Storage Conditions: Polyoxyethylene 35 castor oil can form a stable solution in various organic solvents such as chloroform, ethanol, and propylene glycol; it can also for |  |
| Polyoxyethylene sorbitan monopalmitate | Polyoxyethylene sorbitan monopalmitate. Uses: Designed for use in research and industrial production. Additional or Alternative Names: Polyethylene glycol sorbitan monopalmitatey. Product Category: Non-ionic Surfactants. CAS No. 9005-66-7. Molecular formula: C12H18O11. Mole weight: 338.26. Purity: 0.96. IUPACName: 2-[(2R)-2-[(2R,3R,4R)-3,4-bis(2-hydroxyethoxy)oxolan-2-yl]-2-(2-hydroxyethoxy)ethoxy]ethyl dodecanoate. Canonical SMILES: CCCCCCCCCCCC(=O)OCCOC[C@H]([C@@H]1[C@@H]([C@@H](CO1)OCCO)OCCO)OCCO. Density: 1.08g/ml. Product ID: ACM9005667. Alfa Chemistry ISO 9001:2015 Certified. |  |
| Polyoxyethylene stearate | Polyoxyethylene stearate (POES) is a non-ionic emulsifying agent. Uses: Scientific research. Group: Signaling pathways. Alternative Names: POES. CAS No. 9004-99-3. Pack Sizes: 200 mg; 1 g; 5 g. Product ID: HY-101530. |  |
| Polyoxyethylene stearate | Polyoxyethylene stearate. Group: Biochemicals. Grades: Highly Purified. CAS No. 9004-99-3. Pack Sizes: 1kg, 2kg, 5kg, 10kg, 25kg. US Biological Life Sciences. |  Worldwide |
| Polyoxyethylene stearate | Polyoxyethylene stearate. Group: Polyethylene (pe). CAS No. 9004-99-3. Product ID: 2-hydroxyethyl octadecanoate. Mole weight: HO(CH2CH2O)nOCC17H35. CCCCCCCCCCCCCCCCCC(=O)OCCO. InChI= 1S / C20H40O3 / c1-2-3-4-5-6-7-8-9-10-11-12-13-14-15- 16-17-20 (22) 23-19-18-21 / h21H, 2-19H2, 1H3. RFVNOJDQRGSOEL-UHFFFAOYSA-N. | |
| Polyoxyethylene Stearates | Polyoxyethylene alkyl ethers vary considerably in their physical appearance from liquids, to pastes, to solid waxy substances. They are colorless, white, cream-colored or pale yellow materials with a slight odor. Synonyms: Brij; Cremophor A; Cyclogol 1000; Empilan KB; Empilan KM; Emulgen; Ethosperse; Ethylan; macrogol ethers; macrogoli aether cetostearylicus; macrogoli aether laurilicus; macrogoli aether oleicus; macrogoli aether stearylicus; Marlowet; Plurafac; polyoxyethylene lauryl alcohol ether; Procol; Renex; Ritoleth; Ritox; Texofor A; Volpo. CAS No. 9004-95-9. Product ID: PE-0541. Molecular formula: CH3(CH2)x(OCH2CH2)yOH. Category: Emulsifying Agents; Penetration enhancer; Solubilizing Agents; Wetting Agents. Product Keywords: Solubilizer Excipients; Emulsifier Excipients; PE-0541; Polyoxyethylene Stearates; Emulsifying Agents; Penetration enhancer; Solubilizing Agents; Wetting Agents; CH3(CH2)x(OCH2CH2)yOH; 9004-95-9. UNII: NA. Grade: Pharmceutical Excipients. Administration route: Oral, Topical, Vaginal, Buccal, Rectal. Dosage Form: Cream, Gel, Aerosol foam, Lotion, Soultion, Tablet, Ointment, ect. Stability and Storage Conditions: Polyoxyethylene alkyl ethers are chemically stable in strongly acidic or alkaline conditions. The presence of strong electrolytes may, however, adversely affect the physical stability of emulsions containing polyoxyethylene alkyl ethers. On storage, polyoxyethylene alk | |
| Polyoxyethylene tridecyl ether | 100ml Pack Size. Group: Analytical Reagents, Biochemicals, Building Blocks, Detergents, Organics. Formula: N/A. CAS No. 24938-91-8. Prepack ID 90024918-100ml. See USA prepack pricing. |  |
| Polyoxyethylene tridecyl ether | Poly(ethylene glycol) (12) tridecyl ether is a nonionic surfactant belonging to the family of ethoxylated fatty alcohols. It is commonly used as an emulsifier, solubilizer, and wetting agent in a variety of industrial and personal care products. Poly(ethylene glycol)(12) tridecyl ether has various properties that make it suitable for these applications, including its low toxicity, high solubility in water and organic solvents, and ability to stabilize emulsions. In addition, it can be used as a raw material for the production of other surfactants and specialty chemicals. Uses: Scientific research. Group: Peptides. CAS No. 78330-21-9. Pack Sizes: 10 g; 25 g; 50 g. Product ID: HY-W250166. | |
| Polyoxyl 15 hydroxystearate | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. |  |
| Polyoxyl 20 cetostearyl ether | Polyethylene glycol hexadecyl ether. CAS No. 9004-95-9. Product ID: 8-05104. |  |
| Polyoxyl 20 cetostearyl ether | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 20 Cetostearyl Ether | Polyoxyl 20 Cetostearyl Ether. Synonyms: Polyethelene Glycol Morocetostearyl Ether. Product ID: PE-0582. Category: Nonionic Surfactant: Emulsifier; Wetting Agents. Product Keywords: Solubilizer Excipients; Emulsifier Excipients; Surfactant Excipients; ; PE-0582; Polyoxyl 20 Cetostearyl Ether; Nonionic Surfactant: Emulsifier; Wetting Agents;. UNII: YRC528SWUY. Grade: Pharmceutical Excipients. Administration route: Oral; Topical. Dosage Form: Suspension, cream, gel, aerosol. Stability and Storage Conditions: Store tightly in a cool, dry place. Source and Preparation: This product is a polyethylene glycol monohexadecadecyl ether, containing 17.2%~25.0% ethylene oxide (ethylene oxide), prepared by condensation of hexadecadecyl alcohol mixture with ethylene oxide and polymerization with polyethylene glycol under controlled conditions. | |
| Polyoxyl 20 stearyl ether | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 23 lauryl ether | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 2 stearyl ether | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 32 stearate | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 35 | Castor Oil. antidiabetic. Grades: USP/NF/EP. CAS No. 61791-12-6. Product ID: 8-01284. Properties: [a]D +86.8º (c = 0.05 0.1M phosphate buffer, pH 7). Source : | |
| Polyoxyl 35 castor oil | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 35 Castor Oil | Polyoxyl 35 castor oil occurs as a pale yellow, oily liquid that is clear at temperatures above 26°C. It has a faint but characteristic odor and can be completely liquefied by heating to 26°C. Polyoxyl 40 hydrogenated castor oil occurs as a white to yellowish, semisolid paste at 20°C that liquefies at 30°C. It has a very faint characteristic odor and is almost tasteless in aqueous solution. Polyoxyl 60 hydrogenated castor oil occurs as a white paste at room temperature. It has little taste or odor in aqueous solution. Synonyms: Acconon; Arlatone; Cremophor; Etocas; Eumulgin; Jeechem; Lipocol; macrogolglyceroli hydroxystearas; macrogolglyceroli ricinoleas; Mapeg; Marlowet; Nikkol; Protachem; Simulsol. CAS No. 61791-12-6. Product ID: PE-0614. Category: Emulsifier; Solubilizer; Humectants. Product Keywords: Other Materials; Stabilizers; PE-0614; Polyoxyl 35 Castor Oil; Emulsifier; Solubilizer; Humectants; ; 61791-12-6. UNII: 6D4M1DAL6O. Chemical Name: Polyethoxylated castor oil. Grade: Pharmceutical Excipients. Administration route: Intramuscular; Intravenous; Intravesical; Ophthalmic; Oral; Topical. Dosage Form: Injection, emulsion, Soultion, drops, capsule, suspension, tablet, cream. Stability and Storage Conditions: Polyoxyethylene 35 castor oil can form a stable solution in various organic solvents such as chloroform, ethanol, and propylene glycol; it can also form a clear and stable solution in water. Polyoxye | |
| Polyoxyl 40 Hydrogenated Castor Oil | Polyoxyl 40 Hydrogenated Castor Oil. Synonyms: Polyoxyl (40) Hydrogenated Castor Oil; PEG(40) Hydrogenated Castor Oil; Polyoxyethylene Hydrogenated Castor Oil 40; EP(MACROGOLGLYCEROL HYDROOXYSTEARA TE); NF (Polyoxyl 40 Hydrogenated Castor Oil). CAS No. 61788-85-0. Product ID: PE-0442. Category: Emulsifier; Solvent-enhancing; Base Agents; Dissolving aid; Dispersant; Coating Agents. Product Keywords: Dispersion Excipients; Emulsifier Excipients; Solubilizer Excipients; ; PE-0442; Polyoxyl 40 Hydrogenated Castor Oil; Emulsifier; Solvent-enhancing; Base Agents; Dissolving aid; Dispersant; Coating Agents; ; 61788-85-0. UNII: 7YC686GQ8F. Chemical Name: Polyethylene glycol (40) hydrogenated castor oil. Administration route: Dentistry; Eyes; Oral; local. Dosage Form: Suspension, solution, capsule, cream, tablet, spray. Stability and Storage Conditions: Store closed in a cool, dry place. Avoid contact with acids, bases and oxidants. Commonly used amount and the maximum amount: Maximum dosage of each administration route: oral: 160μg; General external preparation: 15mg/g; Dental external and oral medicine: 9mg/g; Rectum, duct and urethra 60.0mg/g. Source and Preparation: This product is prepared by the reaction of 1mol hydrogenated castor oil with 40~45mol ethylene oxide. It mainly contains the trihydroxy-stearate ester of oxyethylene glycerol, a small amount of polyethylene trihydroxy-stearate ester a | |
| Polyoxyl 40 Hydrogenated Castor Oil USP/NF/EP | nonionic emulsifier. Grades: USP/NF/EP. CAS No. 61788-85-0. Product ID: 8-01281. Properties: soluble in water and alcohol. Reference: | |
| Polyoxyl 40 stearate | 2-Hydroxyethyl octadecanoate Polyethylene Glycol Monostearate (n=approx. 45) (palmitate and stearate mixture). CAS No. 9004-99-3. Product ID: 8-05194. Molecular formula: C20H40O3. Mole weight: 328.54. MFCD No. MFCD00051465. | |
| Polyoxyl 40 stearate | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl (40) Stearate | Polyoxyl (40) Stearate. Synonyms: polyoxyethylene (40) monostearate. CAS No. 9004-99-3. Product ID: PE-0536. Molecular formula: C17H35COO(CH2 CH2O)nH. Category: Solvent-enhancing; Emulsifier. Product Keywords: Solubilizer Excipients; Emulsifier Excipients; PE-0536; Polyoxyl (40) Stearate; Solvent-enhancing; Emulsifier; C17H35COO(CH2 CH2O)nH; 9004-99-3. UNII: NA. Grade: Pharmceutical Excipients. Stability and Storage Conditions: Keep in a cool, dry place. Source and Preparation: Stearate polyhydroxy 40 ester is mainly used as a suppository substrate, such as medrol, progesterone, chlorhexidine, indomethacin, etc. It can be used as the substrate and emulsifier of ointment to increase the decomposition and bioavailability of drugs, so as to make the appearance of ointment more delicate, white and emulsified evenly. Polyhydrocarbon oxy40 stearate can also be used as the matrix of dripping pills, and the dissolution of drugs in the dispersing system and the solubilization of drugs in the dissolution are superior. Stearate polyhydrocarbon oxy40 ester is used in the cosmetic industry as cream, conditioner and other oil-in-water products. | |
| Polyoxyl 40 Stearate | Polyoxyl 40 Stearate. CAS No: 9004-99-3 |  Sarchem Laboratories New Jersey NJ |
| Polyoxyl 4 lauryl ether | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 6 stearate | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 75 stearate | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxyl 8 stearate | United States Pharmacopeia (USP) Reference Standard. Group: Pharmacopeia & metrological institutes standards. | |
| Polyoxylglycerides | Polyoxylglycerides are inert liquid or semi-solid waxy materials and are amphiphilic in character. Caprylocaproyl polyoxylglycerides are pale-yellow oily liquids. Lauroyl polyoxylglycerides and stearoyl polyoxylglycerides occur as pale-yellow waxy solids. Oleoyl polyoxylglycerides and linoleoyl polyoxylglycerides occur as amber oily liquids, which may give rise to a deposit after prolonged periods at 20°C. Synonyms: Polyoxylglycerides are referred to as macrogolglycerides in Europe. Product ID: PE-0562. Category: Emulsifying Agents; Nonionic Surfactant; Penetration Agents; Solubilizing Agents; Sustained-release Agents. Product Keywords: Stabilizers; Emulsifier Excipients; Surfactant Excipients; ; PE-0562; Polyoxylglycerides; Emulsifying Agents; Nonionic Surfactant; Penetration Agents; Solubilizing Agents; Sustained-release Agents. UNII: NA. Grade: Pharmceutical Excipients. Administration route: Oral; topical; vaginal. Dosage Form: Oral route: capsules, tablets, solutions; topical route: emulsions, creams, lotions; vaginal route: emulsions, creams. Stability and Storage Conditions: Polyoxylglycerides are very stable and inert. However, preventive measures against the risk of oxidation or hydrolysis may be taken to ensure stability during handling. Polyoxylglycerides should be preserved in their original containers, and exposure to air, light, heat, and moisture should be prevented. Source and Preparation: Polyoxyl | |
| Polyoxy(methyl-1,2-ethanediyl),.alpha.,.alpha.-(oxydi-2,1-ethanediyl)bis.omega.-(2-aminomethylethoxy)- | Polyoxy(methyl-1,2-ethanediyl). alpha.. alpha.-(oxydi-2,1-ethanediyl)bis.omega.-(2-aminomethylethoxy)-. Uses: Designed for use in research and industrial production. Additional or Alternative Names: Polyoxy(methyl-1,2-ethanediyl). alpha.. alpha.-(oxydi-2,1-ethanediyl)bis.omega.-(2-aminomethylethoxy)-. Product Category: Heterocyclic Organic Compound. CAS No. 194673-87-5. Product ID: ACM194673875. Alfa Chemistry ISO 9001:2015 Certified. | |
| Poly(Oxymethylene) | Solids containing varying amounts of formaldehyde, probably as paraformaldehyde (polymers of formula HO(CH2O)xH where x averages about 30). A hazard to the environment. Immediate steps should be taken to limit spread to the environment.;Formaldehyde, solution, flammable appears as a colorless aqueous solution of formaldehyde, which is a gas at ordinary conditions. Has a pungent irritating odor. Flash point varies from 122 to 141°F. Denser than water. The vapors are heavier than air and are highly irritating to the nose. Toxic if swallowed. Contact can cause severe injury to the skin accompanied by drying, cracking, and scaling. Used to make plastics, other chemicals, and fertilizers. Used as a preservative and a corrosion inhibitor. Rate of onset: Immediate Persistence: Hours Odor threshold: 1 ppm Source/use/other hazard: Disinfection/germicide; fungicide; textile; health care (tissue fixing).;Formaldehyde, solutions (formalin) (corrosive) appears as a colorless liquid with a pungent irritating odor. Contains 37-50% formaldehyde by mass and varying amounts of methanol, added to prevent precipitation of formaldehyde polymers (formaldehyde exists in solution as CH2(OH)2 and its polymers HO(CH2O)xH where x averages about three). Formalin free of methanol is also shipped but must be kept warm (about 30°C (86°F)) to prevent polymerization. Pure formaldehyde, a gas, is not handled commercially because it tends to polymerize | |
| Polyoxymethylene-Copolymer, (acetal-copolymer POMC), granule, 3 mm nominal granule size, weight 0.5 kg, natural | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (acetal-copolymer POMC), rod, diam. 25 mm, L 500 mm, blue | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (acetal-copolymer POMC), rod, diam. 30 mm, L 100 mm, black | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (acetal-copolymer POMC), sheet, thickness 1 mm, size 150×150 mm, tolerance 0.15 | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (acetal-copolymer POMC), sphere, diam. 12.7 mm, weight 20 pcs | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (acetal-homopolymer POMH), film, thickness 0.5 mm, size 150×150 mm | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (acetal-homopolymer POMH), granule, 3 mm nominal granule size, weight 0.5 kg, natural | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (acetal-homopolymer POMH), sphere, diam. 1.59 mm, weight 100 pcs, tolerance ±0.05mm | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (POMC-10% CFR), granule, 3 mm nominal granule size, black | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Polyoxymethylene-Copolymer, (POM H 20% PTFE), granule, 3 mm nominal granule size, weight 0.5 kg, natural | Engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. POM is characterized by its high strength, hardness and rigidity to -40°C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of 1.410 - 1.420 g/cm3. POM is tougher than ABS and available in bright translucent colors, and is not paintable. Uses: Automotive, building & construction, chemical, packaging, mechanical, electrical, consumer goods, medical, food & beverage, furniture, sports, clothing. Group: Polyoxymethylene (pom). | |
| Poly[oxy(methylphenylsilylene)] | Poly[oxy(methylphenylsilylene)]. Group: Polymers. CAS No. 9005-12-3. Mole weight: (C7H8OSi)n. | |
| Poly(oxypropylene) glycol monoallyl ether | Poly(oxypropylene) glycol monoallyl ether. Uses: Designed for use in research and industrial production. CAS No. 9042-19-7. Purity: 0.95. Product ID: ACM9042197-1. Alfa Chemistry ISO 9001:2015 Certified. | |
| Polyoxypropylene stearyl ether | PPG-15 Stearyl Ether. CAS No. 25231-21-4. Product ID: 8-05157. Molecular formula: C21H44O2. Mole weight: 311.57. Properties: cosmetic ingredient. | |
| Polyozellin | Polyozellin is a prolyl endopeptidase inhibitor produced by Polyozellin multiplex. CAS No. 197703-46-1. Molecular formula: C22H14O10. Mole weight: 438.34. |  |
| Poly(p-dioxanone-co-glycolide-co-lactide | p-dioxanone:glycolide:lactide 90:5:5, viscosity 2.0 dL/g. Group: Biodegradable polymers. | |
| Poly(p-dioxanone-co-glycolide-co-lactide | An absorbable, biocompatible block copolymer. Uses: Biodegradable aliphatic polyesters for drug delivery. Group: Biodegradable polymers. Alternative Names: PDS-PGLA, PDO-PGLA. Mole weight: CH3(C4H6O3)m(C4H4O4)n(C6H8O4)oCH3. | |
| Poly(p-dioxanone-co-L-lactide) | This product we offer is a degradable polymer. Group: Biodegradable polymers. Alternative Names: PDS-PLLA, PDO-PLLA. Mole weight: CH3(C4H6O3)m(C6H8O4)nCH3. | |
| Poly(p-dioxanone-co-L-lactide) | viscosity 1.5 dL/g. Group: Biodegradable polymers. | |
| Poly(p-dioxanone-co-L-lactide) | Poly(p-dioxanone-co-L-lactide). Synonyms: PDO-PLLA, PDS-PLLA. Product ID: MSMN-081. Category: Raw Materials. | |
| Poly(pentabromobenzyl acrylate) | Poly(pentabromobenzyl acrylate). Group: other materials. Alternative Names: 2-Propenoic acid, (pentabromophenyl)methyl ester, homopolymer; Poly(pentabrombenzyl)acrylat Molmasse ca. 80000 g/mol; pentabromobenzyl acrylate homopolymer; Ameribrom FR 1025; FR 1025; FR 1025P; PBBPA-FR 1025. CAS No. 59447-57-3. Product ID: (2,3,4,5,6-pentabromophenyl)methylprop-2-enoate. Mole weight: (C10< / sub>H5< / sub>Br5< / sub>O2< / sub>) n. C=CC (=O)OCC1=C (C (=C (C (=C1Br)Br)Br)Br)Br. GRKDVZMVHOLESV-UHFFFAOYSA-N. 96%. | |
| Poly(pentabromobenzyl methacrylate) | Poly(pentabromobenzyl methacrylate). Group: other materials. CAS No. 61803-56-3. 96%. | |
| Poly(pentabromobenzyl methacrylate-co-glycidyl methacrylate) | Poly(pentabromobenzyl methacrylate-co-glycidyl methacrylate). Group: other materials. | |
| Poly(pentabromobenzyl methacrylate-co-glycidyl methacrylate) | Glycidyl methacrylate 10 mol %. Group: Photonic and optical materials. | |
| Poly(pentabromophenyl acrylate-co-glycidyl methacrylate) | Poly(pentabromophenyl acrylate-co-glycidyl methacrylate). Group: other materials. | |
| Poly(pentabromophenyl methacrylate) | Poly(pentabromophenyl methacrylate). Group: other materials. | |
| Poly(pentabromophenyl methacrylate-co-glycidyl methacrylate) | Poly(pentabromophenyl methacrylate-co-glycidyl methacrylate). Group: other materials. | |
| Poly(pentabromophenyl methacrylate-co-glycidyl methacrylate) | glycidyl methacrylate 10 mol %. Group: Photonic and optical materials. | |
| Poly(pentachlorophenyl methacrylate-co-glycidyl methacrylate) | Poly(pentachlorophenyl methacrylate-co-glycidyl methacrylate). Group: other materials. | |
| Poly(pentafluorostyrene) | Poly(pentafluorostyrene). Group: other materials. Alternative Names: PENTAFLUOROSTYRENE POLYMER; POLY(PENTAFLUOROSTYRENE); Poly(pentaflurostyrene). CAS No. 26838-55-1. Mole weight: (C8< / sub>H3< / sub>F5< / sub>) n. | |
| Poly(pentafluorostyrene-co-glycidylmeth& | Poly(pentafluorostyrene-co-glycidylmeth&. Group: other materials. Alternative Names: POLY(PENTAFLUOROSTYRENE-CO-GLYCIDYLMETH&. CAS No. 224962-38-3. Mole weight: (C8< / sub>H3< / sub>F5< / sub>) m (C7< / sub>H10< / sub>O3< / sub>) n. | |
| Poly(pentafluorostyrene) (technical grade) | Poly(pentafluorostyrene) (technical grade). Uses: Designed for use in research and industrial production. Product Category: Promotional Products. CAS No. 26838-55-1. Purity: Tech. Product ID: ACM26838551-1. Alfa Chemistry ISO 9001:2015 Certified. | |
| polypeptide N-acetylgalactosaminyltransferase | Requires both Mn2+ and Ca2+. The glycosyl residue is transferred to threonine or serine hydroxy groups on the polypeptide core of submaxillary mucin, κ-casein, apofetuin and some other acceptors of high molecular mass. Group: Enzymes. Synonyms: protein-UDP acetylgalactosaminyltransferase; UDP-GalNAc:polypeptide N-acetylgalactosaminyl transferase; UDP-N-acetylgalactosamine:κ-casein polypeptide N-acetylgalactosaminyltransferase; uridine diphosphoacetylgalactosamine-glycoprotein acetylgalactosaminyltransferase; glycoprotein acet. Enzyme Commission Number: EC 2.4.1.41. CAS No. 9075-15-4. Storage: Store it at +4 ?C for short term. For long term storage, store it at -20 ?C?-80 ?C. Form: Liquid or lyophilized powder. EXWM-2588; polypeptide N-acetylgalactosaminyltransferase; EC 2.4.1.41; 9075-15-4; protein-UDP acetylgalactosaminyltransferase; UDP-GalNAc:polypeptide N-acetylgalactosaminyl transferase; UDP-N-acetylgalactosamine:κ-casein polypeptide N-acetylgalactosaminyltransferase; uridine diphosphoacetylgalactosamine-glycoprotein acetylgalactosaminyltransferase; glycoprotein acetylgalactosaminyltransferase; polypeptide-N-acetylgalactosamine transferase; UDP-acetylgalactosamine-glycoprotein acetylgalactosaminyltransferase; UDP-acetylgalactosamine:peptide-N-galactosaminyltransferase; UDP-GalNAc:polypeptide N-acetylgalactosami |  |
| Poly(perfluoropropylene Oxide) | Hexafluoropropylene oxide is a colorless odorless gas. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. Its vapors are heavier than air. It can cause asphyxiation by the displacement of air. Exposure of the container to prolonged heat or fire may cause it to rupture violently and rocket.;GasVapor. Group: Polymers. CAS No. 25038-02-2. Product ID: 2,2,3-trifluoro-3-(trifluoromethyl)oxirane. Molecular formula: 166.02g/mol. Mole weight: C3F6O. C1(C(O1)(F)F)(C(F)(F)F)F. InChI=1S/C3F6O/c4-1(2(5, 6)7)3(8, 9)10-1. PGFXOWRDDHCDTE-UHFFFAOYSA-N. | |
| Poly(perfluoropropylene Oxide), ≥95% | Hexafluoropropylene oxide is a colorless odorless gas. It is shipped as a liquefied gas under its vapor pressure. Contact with the liquid can cause frostbite. Its vapors are heavier than air. It can cause asphyxiation by the displacement of air. Exposure of the container to prolonged heat or fire may cause it to rupture violently and rocket.;GasVapor. Group: Polymerization initiators. CAS No. 25038-02-2. Product ID: 2,2,3-trifluoro-3-(trifluoromethyl)oxirane. Molecular formula: 166.02g/mol. Mole weight: C3F6O. C1(C(O1)(F)F)(C(F)(F)F)F. InChI=1S/C3F6O/c4-1(2(5, 6)7)3(8, 9)10-1. PGFXOWRDDHCDTE-UHFFFAOYSA-N. | |
Our database is helping our users find suppliers everyday.
